blk-mq: fix race conditions on cpu hotplug handling
Subsystems (3)
v2 cover blk-mq: fix race conditions on cpu hotplug handling
This patchset addresses several race conditions on cpu hotplug handling for blk-mq. All problems are reproducible by the following script.
while true; do
echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online
done &
while true; do
modprobe -r null_blk
modprobe null_blk queue_mode=2 irqmode=1
sleep 0.1
done
* Changes from v1
- Release q->mq_map in blk_mq_release()
- Fix deadlock when reading cpu_list
- Fix race freeze and unfreeze
Akinobu Mita (6):
blk-mq: fix sysfs registration/unregistration race
blk-mq: Fix use after of free q->mq_map
blk-mq: fix q->mq_usage_counter access race
blk-mq: avoid inserting requests before establishing new mapping
blk-mq: fix freeze queue race
blk-mq: fix deadlock when reading cpu_list
block/blk-core.c | 2 ++ block/blk-mq-cpumap.c | 9 +++--- block/blk-mq-sysfs.c | 50 ++++++++++++++++++++++--------- block/blk-mq.c | 81 ++++++++++++++++++++++++++++++-------------------- block/blk-mq.h | 5 ++-- include/linux/blkdev.h | 9 ++++++ 6 files changed, 102 insertions(+), 54 deletions(-)
Signature · 1 line
1.9.1
PATCH v2 1/6 blk-mq: fix sysfs registration/unregistration race
There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries.
CPU hotplug handling for blk-mq (blk_mq_queue_reinit) does unregister and register sysfs entries of hctx for all request queues in all_q_list. On the other hand, these entries for a request queue may have already been unregistered or in the middle of registration when CPU hotplug event occurs. Because those sysfs entries are registered by blk_mq_register_disk() after the request queue is added to all_q_list, and similarily the request queue is deleted from all_q_list after those are unregistered by blk_mq_unregister_disk().
So we need proper mutual exclusion for those registration and unregistration.
--- block/blk-core.c | 1 + block/blk-mq-sysfs.c | 44 ++++++++++++++++++++++++++++++++++---------- include/linux/blkdev.h | 3 +++ 3 files changed, 38 insertions(+), 10 deletions(-)
block/blk-core.c +1 -0
@@ -687,6 +687,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)__set_bit (QUEUE_FLAG_BYPASS , &q->queue_flags);init_waitqueue_head (&q->mq_freeze_wq); +mutex_init (&q->mq_sysfs_lock);if (blkcg_init_queue (q)) goto fail_bdi;
block/blk-mq-sysfs.c +34 -10
122 lines not on this page · raw message
include/linux/blkdev.h +3 -0
@@ -462,6 +462,9 @@ struct request_queue {struct blk_mq_tag_set *tag_set;struct list_head tag_set_list; + +struct mutex mq_sysfs_lock; +bool mq_sysfs_init_done; };#define QUEUE_FLAG_QUEUED 1/* uses generic tag queueing */
Signature · 1 line
1.9.1
Re: [PATCH v2 1/6] blk-mq: fix sysfs registration/unregistration race
Quoted 13 lines · Akinobu Mita
There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries.
CPU hotplug handling for blk-mq (
blk_mq_queue_reinit) does unregister and register sysfs entries of hctx for all request queues inall_q_list. On the other hand, these entries for a request queue may have already been unregistered or in the middle of registration when CPU hotplug event occurs. Because those sysfs entries are registered byblk_mq_register_disk()after the request queue is added toall_q_list, and similarily the request queue is deleted fromall_q_listafter those are unregistered byblk_mq_unregister_disk().
Quoted 2 lines
So we need proper mutual exclusion for those registration and unregistration.
But that may not be enough, and you miss another point in which blk_mq_sysfs_register() has to be called after the remapping is built, so the introduced lock should have been held in blk_mq_queue_reinit().
Quoted 15 lines
Signed-off-by Akinobu Mita <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>--- block/blk-core.c | 1 + block/blk-mq-sysfs.c | 44 ++++++++++++++++++++++++++++++++++---------- include/linux/blkdev.h | 3 +++ 3 files changed, 38 insertions(+), 10 deletions(-)block/blk-core.c +0
-0
block/blk-core.c struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) · line 690
Quoted 4 lines
block/blk-core.c +1
-0@@ -687,6 +687,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)__set_bit (QUEUE_FLAG_BYPASS , &q->queue_flags);init_waitqueue_head (&q->mq_freeze_wq); +mutex_init (&q->mq_sysfs_lock);
The above should be put into blk_mq_init_allocated_queue().
Quoted 8 lines
block/blk-core.c +0
-0if (blkcg_init_queue (q)) goto fail_bdi;block/blk-mq-sysfs.c +0
-0
block/blk-mq-sysfs.c static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx) · line 336
Quoted 6 lines
block/blk-mq-sysfs.c +1
-1@@ -332,13 +332,15 @@ static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx)struct blk_mq_ctx *ctx;int i; -if (!hctx->nr_ctx || !(hctx->flags &BLK_MQ_F_SYSFS_UP )) +if (!(hctx->flags &BLK_MQ_F_SYSFS_UP ))return ;
It isn't needed to introduce above change.
block/blk-mq-sysfs.c static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx) · line 343
Quoted 7 lines
block/blk-mq-sysfs.c +2
-0hctx_for_each_ctx (hctx, ctx, i)kobject_del (&ctx->kobj);kobject_del (&hctx->kobj); + + hctx->flags &= ~BLK_MQ_F_SYSFS_UP ;
I guess you misunderstand the flag, which just means the syfs stuff for the hcts has been setup, and you needn't clear it.
Quoted 13 lines
block/blk-mq-sysfs.c +1
-1}static int blk_mq_register_hctx (struct blk_mq_hw_ctx *hctx)@@ -347,7 +349,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)struct blk_mq_ctx *ctx;int i, ret; -if (!hctx->nr_ctx || !(hctx->flags &BLK_MQ_F_SYSFS_UP )) +if (!hctx->nr_ctx)return 0 ; ret =kobject_add (&hctx->kobj, &q->mq_kobj,"%u" , hctx->queue_num);
block/blk-mq-sysfs.c static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx) · line 365
Quoted 9 lines
block/blk-mq-sysfs.c +2
-2@@ -357,10 +359,12 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)hctx_for_each_ctx (hctx, ctx, i) { ret =kobject_add (&ctx->kobj, &hctx->kobj,"cpu%u" , ctx->cpu);if (ret) -break ; +return ret; } -return ret; + hctx->flags |=BLK_MQ_F_SYSFS_UP ;
Same with above.
Quoted 15 lines
block/blk-mq-sysfs.c +4
-0+ +return 0 ; }void blk_mq_unregister_disk (struct gendisk *disk)@@ -370,6 +374,8 @@ void blk_mq_unregister_disk(struct gendisk *disk)struct blk_mq_ctx *ctx;int i, j; +mutex_lock (&q->mq_sysfs_lock); +queue_for_each_hw_ctx (q, hctx, i) {blk_mq_unregister_hctx (hctx);
block/blk-mq-sysfs.c void blk_mq_unregister_disk(struct gendisk *disk) · line 394
Quoted 5 lines
block/blk-mq-sysfs.c +2
-0@@ -384,6 +390,9 @@ void blk_mq_unregister_disk(struct gendisk *disk)kobject_put (&q->mq_kobj);kobject_put (&disk_to_dev (disk)->kobj); + + q->mq_sysfs_init_done = false;
The flag isn't needed, but you should hold q->mq_sysfs_lock inside blk_mq_queue_reinit().
Quoted 11 lines
block/blk-mq-sysfs.c +3
-0+mutex_unlock (&q->mq_sysfs_lock); }static void blk_mq_sysfs_init (struct request_queue *q)@@ -414,27 +423,30 @@ int blk_mq_register_disk(struct gendisk *disk)struct blk_mq_hw_ctx *hctx;int ret, i; +mutex_lock (&q->mq_sysfs_lock); +blk_mq_sysfs_init (q);
block/blk-mq-sysfs.c int blk_mq_register_disk(struct gendisk *disk) · line 426
Quoted 10 lines
block/blk-mq-sysfs.c +1
-2ret =kobject_add (&q->mq_kobj,kobject_get (&dev->kobj),"%s" ,"mq" );if (ret <0 ) -return ret; + goto out;kobject_uevent (&q->mq_kobj,KOBJ_ADD );queue_for_each_hw_ctx (q, hctx, i) { - hctx->flags |=BLK_MQ_F_SYSFS_UP ;
Same with above.
Quoted 36 lines
block/blk-mq-sysfs.c +12
-4ret =blk_mq_register_hctx (hctx);if (ret)break ; } -if (ret) { +if (ret)blk_mq_unregister_disk (disk); -return ret; - } +else + q->mq_sysfs_init_done = true; +out: +mutex_unlock (&q->mq_sysfs_lock); -return 0 ; +return ret; }EXPORT_SYMBOL_GPL (blk_mq_register_disk);@@ -443,8 +455,14 @@ void blk_mq_sysfs_unregister(struct request_queue *q)struct blk_mq_hw_ctx *hctx;int i; +mutex_lock (&q->mq_sysfs_lock); +if (!q->mq_sysfs_init_done) + goto out; +queue_for_each_hw_ctx (q, hctx, i)blk_mq_unregister_hctx (hctx); +out: +mutex_unlock (&q->mq_sysfs_lock); }int blk_mq_sysfs_register (struct request_queue *q)
block/blk-mq-sysfs.c int blk_mq_sysfs_register(struct request_queue *q) · line 475
Quoted 6 lines
block/blk-mq-sysfs.c +3
-0@@ -452,11 +470,17 @@ int blk_mq_sysfs_register(struct request_queue *q)struct blk_mq_hw_ctx *hctx;int i, ret =0 ; +mutex_lock (&q->mq_sysfs_lock); +if (!q->mq_sysfs_init_done) + goto out;
The above check needn't.
Quoted 16 lines
block/blk-mq-sysfs.c +3
-0+queue_for_each_hw_ctx (q, hctx, i) { ret =blk_mq_register_hctx (hctx);if (ret)break ; } +out: +mutex_unlock (&q->mq_sysfs_lock);return ret; }include/linux/blkdev.h +0
-0
include/linux/blkdev.h struct request_queue { · line 467
Quoted 6 lines
include/linux/blkdev.h +3
-0@@ -462,6 +462,9 @@ struct request_queue {struct blk_mq_tag_set *tag_set;struct list_head tag_set_list; + +struct mutex mq_sysfs_lock; +bool mq_sysfs_init_done;
Same with above.
Quoted 6 lines
include/linux/blkdev.h +0
-1};#define QUEUE_FLAG_QUEUED 1/* uses generic tag queueing */ --1.9.1
Signature · 1 line
Ming Lei
Re: [PATCH v2 1/6] blk-mq: fix sysfs registration/unregistration race
Hi Ming,
2015-07-08 20:48 GMT+09:00 Ming Lei <[email protected]>:
Quoted 14 lines · Akinobu Mita
Quoted 13 lines
There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries.
CPU hotplug handling for blk-mq (
blk_mq_queue_reinit) does unregister and register sysfs entries of hctx for all request queues inall_q_list. On the other hand, these entries for a request queue may have already been unregistered or in the middle of registration when CPU hotplug event occurs. Because those sysfs entries are registered byblk_mq_register_disk()after the request queue is added toall_q_list, and similarily the request queue is deleted fromall_q_listafter those are unregistered byblk_mq_unregister_disk().
Quoted 6 lines
Quoted 2 lines
So we need proper mutual exclusion for those registration and unregistration.
But that may not be enough, and you miss another point in which
blk_mq_sysfs_register()has to be called after the remapping is built, so the introduced lock should have been held inblk_mq_queue_reinit().
OK.
Although q->mq_sysfs_lock is held in blk_mq_sysfs_register() by this patch, it should be held in blk_mq_queue_reinit() as you suggested. Since hctx->nr_ctx is reset temporarily in blk_mq_map_swqueue() while cpu hotplug callback is called, so we should avoid blk_mq_register_disk() seeing the temporary hctx->nr_ctx value (i.e. zero) at the same time by holding q->mq_sysfs_lock in blk_mq_queue_reinit().
Quoted 16 lines
Quoted 16 lines
Signed-off-by Akinobu Mita <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>--- block/blk-core.c | 1 + block/blk-mq-sysfs.c | 44 ++++++++++++++++++++++++++++++++++---------- include/linux/blkdev.h | 3 +++ 3 files changed, 38 insertions(+), 10 deletions(-)block/blk-core.c +0
-0@@ -687,6 +687,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)__set_bit (QUEUE_FLAG_BYPASS , &q->queue_flags);
Quoted 4 lines
block/blk-core.c struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) · line 690
Quoted 2 lines
block/blk-core.c +1
-0init_waitqueue_head (&q->mq_freeze_wq); +mutex_init (&q->mq_sysfs_lock);The above should be put into
blk_mq_init_allocated_queue().
OK, make sense.
Quoted 21 lines
Quoted 8 lines
block/blk-core.c +0
-0if (blkcg_init_queue (q)) goto fail_bdi;block/blk-mq-sysfs.c +0
-0block/blk-mq-sysfs.c static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx) · line 336
Quoted 6 lines
block/blk-mq-sysfs.c +1
-1@@ -332,13 +332,15 @@ static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx)struct blk_mq_ctx *ctx;int i; -if (!hctx->nr_ctx || !(hctx->flags &BLK_MQ_F_SYSFS_UP )) +if (!(hctx->flags &BLK_MQ_F_SYSFS_UP ))return ;It isn't needed to introduce above change.
Quoted 4 lines
block/blk-mq-sysfs.c +0
-0hctx_for_each_ctx (hctx, ctx, i)kobject_del (&ctx->kobj);
Quoted 6 lines
block/blk-mq-sysfs.c static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx) · line 343
Quoted 3 lines
block/blk-mq-sysfs.c +2
-0kobject_del (&hctx->kobj); + + hctx->flags &= ~BLK_MQ_F_SYSFS_UP ;I guess you misunderstand the flag, which just means the syfs stuff for the hcts has been setup, and you needn't clear it.
I've changed the meaning of the flag which should have been mentioned and also introduced q->mq_sysfs_init_done. So I admit that the code has become much complicated.
But after consideration, I think we can only need q->mq_sysfs_init_done and BLK_MQ_F_SYSFS_UP can be removed. Please see below.
Quoted 42 lines
Quoted 13 lines
block/blk-mq-sysfs.c +1
-1}static int blk_mq_register_hctx (struct blk_mq_hw_ctx *hctx)@@ -347,7 +349,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)struct blk_mq_ctx *ctx;int i, ret; -if (!hctx->nr_ctx || !(hctx->flags &BLK_MQ_F_SYSFS_UP )) +if (!hctx->nr_ctx)return 0 ; ret =kobject_add (&hctx->kobj, &q->mq_kobj,"%u" , hctx->queue_num);block/blk-mq-sysfs.c static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx) · line 365
Quoted 9 lines
block/blk-mq-sysfs.c +2
-2@@ -357,10 +359,12 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)hctx_for_each_ctx (hctx, ctx, i) { ret =kobject_add (&ctx->kobj, &hctx->kobj,"cpu%u" , ctx->cpu);if (ret) -break ; +return ret; } -return ret; + hctx->flags |=BLK_MQ_F_SYSFS_UP ;Same with above.
Quoted 17 lines
block/blk-mq-sysfs.c +4
-0+ +return 0 ; }void blk_mq_unregister_disk (struct gendisk *disk)@@ -370,6 +374,8 @@ void blk_mq_unregister_disk(struct gendisk *disk)struct blk_mq_ctx *ctx;int i, j; +mutex_lock (&q->mq_sysfs_lock); +queue_for_each_hw_ctx (q, hctx, i) {blk_mq_unregister_hctx (hctx);@@ -384,6 +390,9 @@ void blk_mq_unregister_disk(struct gendisk *disk)kobject_put (&q->mq_kobj);
Quoted 6 lines
block/blk-mq-sysfs.c void blk_mq_unregister_disk(struct gendisk *disk) · line 394
Quoted 3 lines
block/blk-mq-sysfs.c +2
-0kobject_put (&disk_to_dev (disk)->kobj); + + q->mq_sysfs_init_done = false;The flag isn't needed, but you should hold
q->mq_sysfs_lockinsideblk_mq_queue_reinit().
The reason for q->mq_sysfs_init_done is to avoid the following scenario.
While the request queue is added to 'all_q_list' (*), blk_mq_queue_reinit() can be called for the queue anytime by CPU hotplug callback. But blk_mq_sysfs_unregister (-) and blk_mq_sysfs_register (+) in blk_mq_queue_reinit must not be called before blk_mq_register_disk (++) is finished and after blk_mq_unregister_disk (--). Because '/sys/block/nullb*/mq/' is not exists.
BLK_MQ_F_SYSFS_UP flag in hctx->flags fixes this issue partially now. In order to fix it completely, we just need q->mq_sysfs_init_done instead of per hctx flag with appropriate locking.
null_add_dev
--> blk_mq_init_queue
--> blk_mq_init_allocated_queue
--> add to 'all_q_list' (*)
--> add_disk
--> blk_register_queue
--> blk_mq_register_disk (++)null_del_dev
--> del_gendisk
--> blk_unregister_queue
--> blk_mq_unregister_disk (--)
--> blk_cleanup_queue
--> blk_mq_free_queue
--> del from 'all_q_list' (*)blk_mq_queue_reinit
--> blk_mq_sysfs_unregister (-)
--> blk_mq_sysfs_register (+)Re: [PATCH v2 1/6] blk-mq: fix sysfs registration/unregistration race
Quoted 144 lines · Akinobu Mita
Hi Ming,
2015-07-08 20:48 GMT+09:00 Ming Lei <[email protected]>:
Quoted 14 lines · Akinobu Mita
Quoted 13 lines
There is a race between cpu hotplug handling and adding/deleting gendisk for blk-mq, where both are trying to register and unregister the same sysfs entries.
CPU hotplug handling for blk-mq (
blk_mq_queue_reinit) does unregister and register sysfs entries of hctx for all request queues inall_q_list. On the other hand, these entries for a request queue may have already been unregistered or in the middle of registration when CPU hotplug event occurs. Because those sysfs entries are registered byblk_mq_register_disk()after the request queue is added toall_q_list, and similarily the request queue is deleted fromall_q_listafter those are unregistered byblk_mq_unregister_disk().Quoted 6 lines
Quoted 2 lines
So we need proper mutual exclusion for those registration and unregistration.
But that may not be enough, and you miss another point in which
blk_mq_sysfs_register()has to be called after the remapping is built, so the introduced lock should have been held inblk_mq_queue_reinit().OK.
Although
q->mq_sysfs_lockis held inblk_mq_sysfs_register()by this patch, it should be held inblk_mq_queue_reinit()as you suggested. Sincehctx->nr_ctxis reset temporarily inblk_mq_map_swqueue()while cpu hotplug callback is called, so we should avoidblk_mq_register_disk()seeing the temporaryhctx->nr_ctxvalue (i.e. zero) at the same time by holdingq->mq_sysfs_lockinblk_mq_queue_reinit().Quoted 16 lines
Quoted 16 lines
Signed-off-by Akinobu Mita <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>--- block/blk-core.c | 1 + block/blk-mq-sysfs.c | 44 ++++++++++++++++++++++++++++++++++---------- include/linux/blkdev.h | 3 +++ 3 files changed, 38 insertions(+), 10 deletions(-)block/blk-core.c +0
-0@@ -687,6 +687,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)__set_bit (QUEUE_FLAG_BYPASS , &q->queue_flags);Quoted 4 lines
block/blk-core.c struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) · line 690
Quoted 2 lines
block/blk-core.c +1
-0init_waitqueue_head (&q->mq_freeze_wq); +mutex_init (&q->mq_sysfs_lock);The above should be put into
blk_mq_init_allocated_queue().OK, make sense.
Quoted 21 lines
Quoted 8 lines
block/blk-core.c +0
-0if (blkcg_init_queue (q)) goto fail_bdi;block/blk-mq-sysfs.c +0
-0block/blk-mq-sysfs.c static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx) · line 336
Quoted 6 lines
block/blk-mq-sysfs.c +1
-1@@ -332,13 +332,15 @@ static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx)struct blk_mq_ctx *ctx;int i; -if (!hctx->nr_ctx || !(hctx->flags &BLK_MQ_F_SYSFS_UP )) +if (!(hctx->flags &BLK_MQ_F_SYSFS_UP ))return ;It isn't needed to introduce above change.
Quoted 4 lines
block/blk-mq-sysfs.c +0
-0hctx_for_each_ctx (hctx, ctx, i)kobject_del (&ctx->kobj);Quoted 6 lines
block/blk-mq-sysfs.c static void blk_mq_unregister_hctx(struct blk_mq_hw_ctx *hctx) · line 343
Quoted 3 lines
block/blk-mq-sysfs.c +2
-0kobject_del (&hctx->kobj); + + hctx->flags &= ~BLK_MQ_F_SYSFS_UP ;I guess you misunderstand the flag, which just means the syfs stuff for the hcts has been setup, and you needn't clear it.
I've changed the meaning of the flag which should have been mentioned and also introduced
q->mq_sysfs_init_done. So I admit that the code has become much complicated.But after consideration, I think we can only need
q->mq_sysfs_init_doneandBLK_MQ_F_SYSFS_UPcan be removed. Please see below.Quoted 42 lines
Quoted 13 lines
block/blk-mq-sysfs.c +1
-1}static int blk_mq_register_hctx (struct blk_mq_hw_ctx *hctx)@@ -347,7 +349,7 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)struct blk_mq_ctx *ctx;int i, ret; -if (!hctx->nr_ctx || !(hctx->flags &BLK_MQ_F_SYSFS_UP )) +if (!hctx->nr_ctx)return 0 ; ret =kobject_add (&hctx->kobj, &q->mq_kobj,"%u" , hctx->queue_num);block/blk-mq-sysfs.c static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx) · line 365
Quoted 9 lines
block/blk-mq-sysfs.c +2
-2@@ -357,10 +359,12 @@ static int blk_mq_register_hctx(struct blk_mq_hw_ctx *hctx)hctx_for_each_ctx (hctx, ctx, i) { ret =kobject_add (&ctx->kobj, &hctx->kobj,"cpu%u" , ctx->cpu);if (ret) -break ; +return ret; } -return ret; + hctx->flags |=BLK_MQ_F_SYSFS_UP ;Same with above.
Quoted 17 lines
block/blk-mq-sysfs.c +4
-0+ +return 0 ; }void blk_mq_unregister_disk (struct gendisk *disk)@@ -370,6 +374,8 @@ void blk_mq_unregister_disk(struct gendisk *disk)struct blk_mq_ctx *ctx;int i, j; +mutex_lock (&q->mq_sysfs_lock); +queue_for_each_hw_ctx (q, hctx, i) {blk_mq_unregister_hctx (hctx);@@ -384,6 +390,9 @@ void blk_mq_unregister_disk(struct gendisk *disk)kobject_put (&q->mq_kobj);Quoted 6 lines
block/blk-mq-sysfs.c void blk_mq_unregister_disk(struct gendisk *disk) · line 394
Quoted 3 lines
block/blk-mq-sysfs.c +2
-0kobject_put (&disk_to_dev (disk)->kobj); + + q->mq_sysfs_init_done = false;The flag isn't needed, but you should hold
q->mq_sysfs_lockinsideblk_mq_queue_reinit().The reason for
q->mq_sysfs_init_doneis to avoid the following scenario.
Quoted 7 lines
While the request queue is added to '
all_q_list' (*),blk_mq_queue_reinit()can be called for the queue anytime by CPU hotplug callback. Butblk_mq_sysfs_unregister(-) andblk_mq_sysfs_register(+) inblk_mq_queue_reinitmust not be called beforeblk_mq_register_disk(++) is finished and afterblk_mq_unregister_disk(--). Because '/sys/block/nullb*/mq/' is not exists.
Yes.
Quoted 4 lines
BLK_MQ_F_SYSFS_UPflag inhctx->flagsfixes this issue partially now. In order to fix it completely, we just needq->mq_sysfs_init_doneinstead of per hctx flag with appropriate locking.
One flag should be OK, but keeping both just makes things complicated, and looks mq_sysfs_init_done is better.
Quoted 20 lines
null_add_dev--> blk_mq_init_queue --> blk_mq_init_allocated_queue --> add to 'all_q_list' (*) --> add_disk --> blk_register_queue --> blk_mq_register_disk (++)
null_del_dev--> del_gendisk --> blk_unregister_queue --> blk_mq_unregister_disk (--) --> blk_cleanup_queue --> blk_mq_free_queue --> del from 'all_q_list' (*)
blk_mq_queue_reinit--> blk_mq_sysfs_unregister (-) --> blk_mq_sysfs_register (+)
Signature · 1 line
Ming Lei
PATCH v2 2/6 blk-mq: Fix use after of free q->mq_map
In reply to Akinobu MitaCPU hotplug handling for blk-mq (blk_mq_queue_reinit) updates q->mq_map by blk_mq_update_queue_map() for all request queues in all_q_list. On the other hand, q->mq_map is released before deleting the queue from all_q_list.
So if CPU hotplug event occurs in the window, invalid memory access can happen. Fix it by releasing q->mq_map in blk_mq_release() to make it happen latter than removal from all_q_list.
--- block/blk-mq.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
block/blk-mq.c +3 -5
@@ -1928,6 +1928,9 @@ void blk_mq_release(struct request_queue *q)kfree (hctx); } +kfree (q->mq_map); + q->mq_map =NULL ; +kfree (q->queue_hw_ctx);/* ctx kobj stays in queue_ctx */
@@ -2073,11 +2076,6 @@ void blk_mq_free_queue(struct request_queue *q)blk_mq_free_hw_queues (q, set);percpu_ref_exit (&q->mq_usage_counter); - -kfree (q->mq_map); - - q->mq_map =NULL ; -mutex_lock (&all_q_mutex);list_del_init (&q->all_q_node);mutex_unlock (&all_q_mutex);
Signature · 1 line
1.9.1
Re: [PATCH v2 2/6] blk-mq: Fix use after of free q->mq_map
Quoted 5 lines · Akinobu Mita
CPU hotplug handling for blk-mq (
blk_mq_queue_reinit) updatesq->mq_mapbyblk_mq_update_queue_map()for all request queues inall_q_list. On the other hand,q->mq_mapis released before deleting the queue fromall_q_list.
Quoted 8 lines
So if CPU hotplug event occurs in the window, invalid memory access can happen. Fix it by releasing
q->mq_mapinblk_mq_release()to make it happen latter than removal fromall_q_list.Signed-off-by Akinobu Mita <[email protected]>Suggested-by Ming Lei <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>
Quoted 33 lines
--- block/blk-mq.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)block/blk-mq.c +3
-6@@ -1928,6 +1928,9 @@ void blk_mq_release(struct request_queue *q)kfree (hctx); } +kfree (q->mq_map); + q->mq_map =NULL ; +kfree (q->queue_hw_ctx);/* ctx kobj stays in queue_ctx */ @@ -2073,11 +2076,6 @@ void blk_mq_free_queue(struct request_queue *q)blk_mq_free_hw_queues (q, set);percpu_ref_exit (&q->mq_usage_counter); - -kfree (q->mq_map); - - q->mq_map =NULL ; -mutex_lock (&all_q_mutex);list_del_init (&q->all_q_node);mutex_unlock (&all_q_mutex); --1.9.1
Signature · 1 line
Ming Lei
PATCH v2 3/6 blk-mq: fix q->mq_usage_counter access race
In reply to Akinobu MitaCPU hotplug handling for blk-mq (blk_mq_queue_reinit) accesses q->mq_usage_counter while freezing all request queues in all_q_list. On the other hand, q->mq_usage_counter is deinitialized in blk_mq_free_queue() before deleting the queue from all_q_list.
So if CPU hotplug event occurs in the window, percpu_ref_kill() is called with q->mq_usage_counter which has already been marked dead, and it triggers warning. Fix it by deleting the queue from all_q_list earlier than destroying q->mq_usage_counter.
--- block/blk-mq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
block/blk-mq.c +4 -3
@@ -2070,15 +2070,16 @@ void blk_mq_free_queue(struct request_queue *q) {struct blk_mq_tag_set *set = q->tag_set; +mutex_lock (&all_q_mutex); +list_del_init (&q->all_q_node); +mutex_unlock (&all_q_mutex); +blk_mq_del_queue_tag_set (q);blk_mq_exit_hw_queues (q, set, set->nr_hw_queues);blk_mq_free_hw_queues (q, set);percpu_ref_exit (&q->mq_usage_counter); -mutex_lock (&all_q_mutex); -list_del_init (&q->all_q_node); -mutex_unlock (&all_q_mutex); }/* Basically redo blk_mq_init_queue with queue frozen */
Signature · 1 line
1.9.1
Re: [PATCH v2 3/6] blk-mq: fix q->mq_usage_counter access race
Quoted 5 lines · Akinobu Mita
CPU hotplug handling for blk-mq (
blk_mq_queue_reinit) accessesq->mq_usage_counterwhile freezing all request queues inall_q_list. On the other hand,q->mq_usage_counteris deinitialized inblk_mq_free_queue()before deleting the queue fromall_q_list.
Quoted 8 lines
So if CPU hotplug event occurs in the window,
percpu_ref_kill()is called withq->mq_usage_counterwhich has already been marked dead, and it triggers warning. Fix it by deleting the queue fromall_q_listearlier than destroyingq->mq_usage_counter.Signed-off-by Akinobu Mita <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>
Quoted 31 lines
--- block/blk-mq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)block/blk-mq.c +4
-4@@ -2070,15 +2070,16 @@ void blk_mq_free_queue(struct request_queue *q) {struct blk_mq_tag_set *set = q->tag_set; +mutex_lock (&all_q_mutex); +list_del_init (&q->all_q_node); +mutex_unlock (&all_q_mutex); +blk_mq_del_queue_tag_set (q);blk_mq_exit_hw_queues (q, set, set->nr_hw_queues);blk_mq_free_hw_queues (q, set);percpu_ref_exit (&q->mq_usage_counter); -mutex_lock (&all_q_mutex); -list_del_init (&q->all_q_node); -mutex_unlock (&all_q_mutex); }/* Basically redo blk_mq_init_queue with queue frozen */ --1.9.1
Signature · 1 line
Ming Lei
PATCH v2 4/6 blk-mq: avoid inserting requests before establishing new mapping
In reply to Akinobu MitaNotifier callbacks for CPU_ONLINE action can be run on the other CPU than the CPU which was just onlined. So it is possible for the process running on the just onlined CPU to insert request and run hw queue before establishing new mapping which is done by blk_mq_queue_reinit_notify().
This can cause a problem when the CPU has just been onlined first time since the request queue was initialized. At this time ctx->index_hw for the CPU, which is the index in hctx->ctxs[] for this ctx, is still zero before blk_mq_queue_reinit_notify() is called by notifier callbacks for CPU_ONLINE action.
For example, there is a single hw queue (hctx) and two CPU queues (ctx0 for CPU0, and ctx1 for CPU1). Now CPU1 is just onlined and a request is inserted into ctx1->rq_list and set bit0 in pending bitmap as ctx1->index_hw is still zero.
And then while running hw queue, flush_busy_ctxs() finds bit0 is set in pending bitmap and tries to retrieve requests in hctx->ctxs[0]->rq_list. But htx->ctxs[0] is a pointer to ctx0, so the request in ctx1->rq_list is ignored.
Fix it by ensuring that new mapping is established before onlined cpu starts running.
--- block/blk-mq-cpumap.c | 9 +++++---- block/blk-mq.c | 41 ++++++++++++++++++++++++++--------------- block/blk-mq.h | 3 ++- 3 files changed, 33 insertions(+), 20 deletions(-)
block/blk-mq-cpumap.c +5 -4
@@ -31,7 +31,8 @@ static int get_first_sibling(unsigned int cpu)return cpu; } -int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues) +int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues, +const struct cpumask *online_mask) {unsigned int i, nr_cpus, nr_uniq_cpus, queue, first_sibling;cpumask_var_t cpus;
@@ -41,7 +42,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)cpumask_clear (cpus); nr_cpus = nr_uniq_cpus =0 ; -for_each_online_cpu (i) { +for_each_cpu (i, online_mask) { nr_cpus++; first_sibling =get_first_sibling (i);if (!cpumask_test_cpu (first_sibling, cpus))
@@ -51,7 +52,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues) queue =0 ;for_each_possible_cpu (i) { -if (!cpu_online (i)) { +if (!cpumask_test_cpu (i, online_mask)) { map[i] =0 ;continue ; }
@@ -95,7 +96,7 @@ unsigned int *blk_mq_make_queue_map(struct blk_mq_tag_set *set)if (!map)return NULL ; -if (!blk_mq_update_queue_map (map, set->nr_hw_queues)) +if (!blk_mq_update_queue_map (map, set->nr_hw_queues, cpu_online_mask))return map;kfree (map);
block/blk-mq.c +26 -15
92 lines not on this page · raw message
block/blk-mq.h +2 -1
@@ -51,7 +51,8 @@ void blk_mq_disable_hotplug(void);* CPU -> queue mappings */ extern unsigned int *blk_mq_make_queue_map (struct blk_mq_tag_set *set); -extern int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues); +extern int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues, +const struct cpumask *online_mask);extern int blk_mq_hw_queue_to_node (unsigned int *map,unsigned int );/*
Signature · 1 line
1.9.1
Re: [PATCH v2 4/6] blk-mq: avoid inserting requests before establishing new mapping
Quoted 128 lines · Akinobu Mita
Notifier callbacks for
CPU_ONLINEaction can be run on the other CPU than the CPU which was just onlined. So it is possible for the process running on the just onlined CPU to insert request and run hw queue before establishing new mapping which is done byblk_mq_queue_reinit_notify().This can cause a problem when the CPU has just been onlined first time since the request queue was initialized. At this time
ctx->index_hwfor the CPU, which is the index in hctx->ctxs[] for this ctx, is still zero beforeblk_mq_queue_reinit_notify()is called by notifier callbacks forCPU_ONLINEaction.For example, there is a single hw queue (hctx) and two CPU queues (ctx0 for CPU0, and ctx1 for CPU1). Now CPU1 is just onlined and a request is inserted into
ctx1->rq_listand set bit0 in pending bitmap asctx1->index_hwis still zero.And then while running hw queue,
flush_busy_ctxs()finds bit0 is set in pending bitmap and tries to retrieve requests in hctx->ctxs[0]->rq_list. But htx->ctxs[0] is a pointer to ctx0, so the request inctx1->rq_listis ignored.Fix it by ensuring that new mapping is established before onlined cpu starts running.
Signed-off-by Akinobu Mita <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>--- block/blk-mq-cpumap.c | 9 +++++---- block/blk-mq.c | 41 ++++++++++++++++++++++++++--------------- block/blk-mq.h | 3 ++- 3 files changed, 33 insertions(+), 20 deletions(-)block/blk-mq-cpumap.c +5
-4@@ -31,7 +31,8 @@ static int get_first_sibling(unsigned int cpu)return cpu; } -int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues) +int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues, +const struct cpumask *online_mask) {unsigned int i, nr_cpus, nr_uniq_cpus, queue, first_sibling;cpumask_var_t cpus;@@ -41,7 +42,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues)cpumask_clear (cpus); nr_cpus = nr_uniq_cpus =0 ; -for_each_online_cpu (i) { +for_each_cpu (i, online_mask) { nr_cpus++; first_sibling =get_first_sibling (i);if (!cpumask_test_cpu (first_sibling, cpus))@@ -51,7 +52,7 @@ int blk_mq_update_queue_map(unsigned int *map, unsigned int nr_queues) queue =0 ;for_each_possible_cpu (i) { -if (!cpu_online (i)) { +if (!cpumask_test_cpu (i, online_mask)) { map[i] =0 ;continue ; }@@ -95,7 +96,7 @@ unsigned int *blk_mq_make_queue_map(struct blk_mq_tag_set *set)if (!map)return NULL ; -if (!blk_mq_update_queue_map (map, set->nr_hw_queues)) +if (!blk_mq_update_queue_map (map, set->nr_hw_queues, cpu_online_mask))return map;kfree (map);block/blk-mq.c +10
-5@@ -1799,7 +1799,8 @@ static void blk_mq_init_cpu_queues(struct request_queue *q, } } -static void blk_mq_map_swqueue (struct request_queue *q) +static void blk_mq_map_swqueue (struct request_queue *q, +const struct cpumask *online_mask) {unsigned int i;struct blk_mq_hw_ctx *hctx;@@ -1816,7 +1817,7 @@ static void blk_mq_map_swqueue(struct request_queue *q)*/ queue_for_each_ctx (q, ctx, i) {/* If the cpu isn't online, the cpu is mapped to first hctx */ -if (!cpu_online (i)) +if (!cpumask_test_cpu (i, online_mask))continue ; hctx = q->mq_ops->map_queue (q, i);@@ -2046,7 +2047,10 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set,blk_mq_add_queue_tag_set (set, q); -blk_mq_map_swqueue (q); +get_online_cpus (); +blk_mq_update_queue_map (q->mq_map, q->nr_hw_queues, cpu_online_mask); +blk_mq_map_swqueue (q, cpu_online_mask); +put_online_cpus ();return q;@@ -2083,13 +2087,14 @@ void blk_mq_free_queue(struct request_queue *q) }/* Basically redo blk_mq_init_queue with queue frozen */ -static void blk_mq_queue_reinit (struct request_queue *q) +static void blk_mq_queue_reinit (struct request_queue *q, +const struct cpumask *online_mask) {WARN_ON_ONCE (!atomic_read (&q->mq_freeze_depth));blk_mq_sysfs_unregister (q); -blk_mq_update_queue_map (q->mq_map, q->nr_hw_queues); +blk_mq_update_queue_map (q->mq_map, q->nr_hw_queues, online_mask);/* * redo blk_mq_init_cpu_queues and blk_mq_init_hw_queues. FIXME: maybe
block/blk-mq.c static void blk_mq_queue_reinit(struct request_queue *q) · line 2110
Quoted 10 lines
block/blk-mq.c +2
-1@@ -2097,25 +2102,31 @@ static void blk_mq_queue_reinit(struct request_queue *q)* involves free and re-allocate memory, worthy doing?) */ -blk_mq_map_swqueue (q); +blk_mq_map_swqueue (q, online_mask);blk_mq_sysfs_register (q); } +static struct cpumask online_new;
Better to comment on why there isn't race on the single global variable.
block/blk-mq.c static void blk_mq_queue_reinit(struct request_queue *q) · line 2115
Quoted 13 lines
block/blk-mq.c +2
-6+static int blk_mq_queue_reinit_notify (struct notifier_block *nb,unsigned long action,void *hcpu) {struct request_queue *q; +int cpu = (unsigned long )hcpu; -/* -* Before new mappings are established, hotadded cpu might already -* start handling requests. This doesn't break anything as we map -* offline CPUs to first hardware queue. We will re-init the queue -* below to get optimal settings. -*/
You should put some comment here about why the change is introduced because the race isn't very obvious.
Quoted 43 lines
block/blk-mq.c +12
-3-if (action !=CPU_DEAD && action !=CPU_DEAD_FROZEN && - action !=CPU_ONLINE && action !=CPU_ONLINE_FROZEN ) +switch (action & ~CPU_TASKS_FROZEN ) { +case CPU_DEAD : +case CPU_UP_CANCELED : +cpumask_copy (&online_new, cpu_online_mask); +break ; +case CPU_UP_PREPARE : +cpumask_copy (&online_new, cpu_online_mask); +cpumask_set_cpu (cpu, &online_new); +break ; +default :return NOTIFY_OK ; + }mutex_lock (&all_q_mutex);@@ -2139,7 +2150,7 @@ static int blk_mq_queue_reinit_notify(struct notifier_block *nb, }list_for_each_entry (q, &all_q_list, all_q_node) -blk_mq_queue_reinit (q); +blk_mq_queue_reinit (q, &online_new);list_for_each_entry (q, &all_q_list, all_q_node)blk_mq_unfreeze_queue (q);block/blk-mq.h +2
-2@@ -51,7 +51,8 @@ void blk_mq_disable_hotplug(void);* CPU -> queue mappings */ extern unsigned int *blk_mq_make_queue_map (struct blk_mq_tag_set *set); -extern int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues); +extern int blk_mq_update_queue_map (unsigned int *map,unsigned int nr_queues, +const struct cpumask *online_mask);extern int blk_mq_hw_queue_to_node (unsigned int *map,unsigned int );/* -- 1.9.1
Signature · 1 line
Ming Lei
PATCH v2 5/6 blk-mq: fix freeze queue race
In reply to Akinobu MitaThere are several race conditions while freezing queue.
When unfreezing queue, there is a small window between decrementing q->mq_freeze_depth to zero and percpu_ref_reinit() call with q->mq_usage_counter. If the other calls blk_mq_freeze_queue_start() in the window, q->mq_freeze_depth is increased from zero to one and percpu_ref_kill() is called with q->mq_usage_counter which is already killed. percpu refcount should be re-initialized before killed again.
Also, there is a race condition while switching to percpu mode. percpu_ref_switch_to_percpu() and percpu_ref_kill() must not be executed at the same time as the following scenario is possible:
1. q->mq_usage_counter is initialized in atomic mode. (atomic counter: 1)
2. After the disk registration, a process like systemd-udev starts accessing the disk, and successfully increases refcount successfully by percpu_ref_tryget_live() in blk_mq_queue_enter(). (atomic counter: 2)
3. In the final stage of initialization, q->mq_usage_counter is being switched to percpu mode by percpu_ref_switch_to_percpu() in blk_mq_finish_init(). But if CONFIG_PREEMPT_VOLUNTARY is enabled, the process is rescheduled in the middle of switching when calling wait_event() in __percpu_ref_switch_to_percpu(). (atomic counter: 2)
4. CPU hotplug handling for blk-mq calls percpu_ref_kill() to freeze request queue. q->mq_usage_counter is decreased and marked as DEAD. Wait until all requests have finished.
(atomic counter: 1)
5. The process rescheduled in the step 3. is resumed and finishes all remaining work in __percpu_ref_switch_to_percpu(). A bias value is added to atomic counter of q->mq_usage_counter. (atomic counter: PERCPU_COUNT_BIAS + 1)
6. A request issed in the step 2. is finished and q->mq_usage_counter is decreased by blk_mq_queue_exit(). q->mq_usage_counter is DEAD, so atomic counter is decreased and no release handler is called. (atomic counter: PERCPU_COUNT_BIAS)
7. CPU hotplug handling in the step 4. will wait forever as q->mq_usage_counter will never be zero.
Also, percpu_ref_reinit() and percpu_ref_kill() must not be executed at the same time. Because both functions could call __percpu_ref_switch_to_percpu() which adds the bias value and initialize percpu counter.
Fix those races by serializing with per-queue mutex.
--- block/blk-core.c | 1 + block/blk-mq-sysfs.c | 2 ++ block/blk-mq.c | 8 ++++++++ include/linux/blkdev.h | 6 ++++++ 4 files changed, 17 insertions(+)
block/blk-core.c +1 -0
@@ -687,6 +687,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)__set_bit (QUEUE_FLAG_BYPASS , &q->queue_flags);init_waitqueue_head (&q->mq_freeze_wq); +mutex_init (&q->mq_freeze_lock);mutex_init (&q->mq_sysfs_lock);if (blkcg_init_queue (q))
block/blk-mq-sysfs.c +2 -0
@@ -413,7 +413,9 @@ static void blk_mq_sysfs_init(struct request_queue *q)/* see blk_register_queue() */ void blk_mq_finish_init (struct request_queue *q) { +mutex_lock (&q->mq_freeze_lock);percpu_ref_switch_to_percpu (&q->mq_usage_counter); +mutex_unlock (&q->mq_freeze_lock); }int blk_mq_register_disk (struct gendisk *disk)
block/blk-mq.c +8 -0
@@ -115,11 +115,15 @@ void blk_mq_freeze_queue_start(struct request_queue *q) {int freeze_depth; +mutex_lock (&q->mq_freeze_lock); + freeze_depth =atomic_inc_return (&q->mq_freeze_depth);if (freeze_depth ==1 ) {percpu_ref_kill (&q->mq_usage_counter);blk_mq_run_hw_queues (q, false); } + +mutex_unlock (&q->mq_freeze_lock); }EXPORT_SYMBOL_GPL (blk_mq_freeze_queue_start);
@@ -143,12 +147,16 @@ void blk_mq_unfreeze_queue(struct request_queue *q) {int freeze_depth; +mutex_lock (&q->mq_freeze_lock); + freeze_depth =atomic_dec_return (&q->mq_freeze_depth);WARN_ON_ONCE (freeze_depth <0 );if (!freeze_depth) {percpu_ref_reinit (&q->mq_usage_counter);wake_up_all (&q->mq_freeze_wq); } + +mutex_unlock (&q->mq_freeze_lock); }EXPORT_SYMBOL_GPL (blk_mq_unfreeze_queue);
include/linux/blkdev.h +6 -0
@@ -457,6 +457,12 @@ struct request_queue {#endif struct rcu_head rcu_head;wait_queue_head_t mq_freeze_wq; +/* +* Protect concurrent access to mq_usage_counter by +* percpu_ref_switch_to_percpu(), percpu_ref_kill(), and +* percpu_ref_reinit(). +*/ +struct mutex mq_freeze_lock;struct percpu_ref mq_usage_counter;struct list_head all_q_node;
Signature · 1 line
1.9.1
Re: [PATCH v2 5/6] blk-mq: fix freeze queue race
Quoted 46 lines · On Thu, 2 Jul 2015 23:29:56 +0900 Akinobu Mita <[email protected]> wrote:
There are several race conditions while freezing queue.
When unfreezing queue, there is a small window between decrementing
q->mq_freeze_depthto zero andpercpu_ref_reinit()call withq->mq_usage_counter. If the other callsblk_mq_freeze_queue_start()in the window,q->mq_freeze_depthis increased from zero to one andpercpu_ref_kill()is called withq->mq_usage_counterwhich is already killed. percpu refcount should be re-initialized before killed again.Also, there is a race condition while switching to percpu mode.
percpu_ref_switch_to_percpu()andpercpu_ref_kill()must not be executed at the same time as the following scenario is possible:1.
q->mq_usage_counteris initialized in atomic mode. (atomic counter: 1)2. After the disk registration, a process like systemd-udev starts accessing the disk, and successfully increases refcount successfully by
percpu_ref_tryget_live()inblk_mq_queue_enter(). (atomic counter: 2)3. In the final stage of initialization,
q->mq_usage_counteris being switched to percpu mode bypercpu_ref_switch_to_percpu()inblk_mq_finish_init(). But ifCONFIG_PREEMPT_VOLUNTARYis enabled, the process is rescheduled in the middle of switching when callingwait_event()in__percpu_ref_switch_to_percpu(). (atomic counter: 2)4. CPU hotplug handling for blk-mq calls
percpu_ref_kill()to freeze request queue.q->mq_usage_counteris decreased and marked as DEAD. Wait until all requests have finished.
(atomic counter: 1)5. The process rescheduled in the step 3. is resumed and finishes all remaining work in
__percpu_ref_switch_to_percpu(). A bias value is added to atomic counter ofq->mq_usage_counter. (atomic counter:PERCPU_COUNT_BIAS+ 1)6. A request issed in the step 2. is finished and
q->mq_usage_counteris decreased byblk_mq_queue_exit().q->mq_usage_counteris DEAD, so atomic counter is decreased and no release handler is called. (atomic counter:PERCPU_COUNT_BIAS)7. CPU hotplug handling in the step 4. will wait forever as
q->mq_usage_counterwill never be zero.
Quoted 6 lines
Also,
percpu_ref_reinit()andpercpu_ref_kill()must not be executed at the same time. Because both functions could call__percpu_ref_switch_to_percpu()which adds the bias value and initialize percpu counter.Fix those races by serializing with per-queue mutex.
This patch looks fine since at least changing DEAD state of percpu ref state should have been synchronized by caller.
Also looks __percpu_ref_switch_to_percpu() need to check if the refcount becomes dead after current switching, and seems something like following is needed:
lib/percpu-refcount.c +4 -0
@@ -235,6 +235,10 @@ static void __percpu_ref_switch_to_percpu(struct percpu_ref *ref)wait_event (percpu_ref_switch_waitq, !ref->confirm_switch); +/* dying or dead ref can't be switched to percpu mode w/o reinit */ +if (ref->percpu_count_ptr & __PERCPU_REF_DEAD) +return ; +atomic_long_add (PERCPU_COUNT_BIAS , &ref->count);/*
Quoted 91 lines
Signed-off-by Akinobu Mita <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>--- block/blk-core.c | 1 + block/blk-mq-sysfs.c | 2 ++ block/blk-mq.c | 8 ++++++++ include/linux/blkdev.h | 6 ++++++ 4 files changed, 17 insertions(+)block/blk-core.c +1
-0@@ -687,6 +687,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)__set_bit (QUEUE_FLAG_BYPASS , &q->queue_flags);init_waitqueue_head (&q->mq_freeze_wq); +mutex_init (&q->mq_freeze_lock);mutex_init (&q->mq_sysfs_lock);if (blkcg_init_queue (q))block/blk-mq-sysfs.c +2
-0@@ -413,7 +413,9 @@ static void blk_mq_sysfs_init(struct request_queue *q)/* see blk_register_queue() */ void blk_mq_finish_init (struct request_queue *q) { +mutex_lock (&q->mq_freeze_lock);percpu_ref_switch_to_percpu (&q->mq_usage_counter); +mutex_unlock (&q->mq_freeze_lock); }int blk_mq_register_disk (struct gendisk *disk)block/blk-mq.c +8
-0@@ -115,11 +115,15 @@ void blk_mq_freeze_queue_start(struct request_queue *q) {int freeze_depth; +mutex_lock (&q->mq_freeze_lock); + freeze_depth =atomic_inc_return (&q->mq_freeze_depth);if (freeze_depth ==1 ) {percpu_ref_kill (&q->mq_usage_counter);blk_mq_run_hw_queues (q, false); } + +mutex_unlock (&q->mq_freeze_lock); }EXPORT_SYMBOL_GPL (blk_mq_freeze_queue_start);@@ -143,12 +147,16 @@ void blk_mq_unfreeze_queue(struct request_queue *q) {int freeze_depth; +mutex_lock (&q->mq_freeze_lock); + freeze_depth =atomic_dec_return (&q->mq_freeze_depth);WARN_ON_ONCE (freeze_depth <0 );if (!freeze_depth) {percpu_ref_reinit (&q->mq_usage_counter);wake_up_all (&q->mq_freeze_wq); } + +mutex_unlock (&q->mq_freeze_lock); }EXPORT_SYMBOL_GPL (blk_mq_unfreeze_queue);include/linux/blkdev.h +6
-0@@ -457,6 +457,12 @@ struct request_queue {#endif struct rcu_head rcu_head;wait_queue_head_t mq_freeze_wq; +/* +* Protect concurrent access to mq_usage_counter by +* percpu_ref_switch_to_percpu(), percpu_ref_kill(), and +* percpu_ref_reinit(). +*/ +struct mutex mq_freeze_lock;struct percpu_ref mq_usage_counter;struct list_head all_q_node;
Tejun Heo
maintainerRe: [PATCH v2 5/6] blk-mq: fix freeze queue race
Quoted 6 lines · Ming Lei
This patch looks fine since at least changing DEAD state of percpu ref state should have been synchronized by caller.
Also looks
__percpu_ref_switch_to_percpu()need to check if the refcount becomes dead after current switching, and seems something like following is needed:
Hmmm... but the caller is responsible for synchronization for these operations. If the state changes while waiting, it indicates a synchronization bug and testing it one more time is kinda weird. What if it changes right after that test?
Thanks.
Signature · 1 line
tejun
Re: [PATCH v2 5/6] blk-mq: fix freeze queue race
Quoted 4 lines · Tejun Heo
Quoted 3 lines · Ming Lei
This patch looks fine since at least changing DEAD state of percpu ref state should have been synchronized by caller.
Quoted 8 lines
Quoted 3 lines
Also looks
__percpu_ref_switch_to_percpu()need to check if the refcount becomes dead after current switching, and seems something like following is needed:Hmmm... but the caller is responsible for synchronization for these operations. If the state changes while waiting, it indicates a synchronization bug and testing it one more time is kinda weird. What if it changes right after that test?
OK.
Also looks it is helpful to detect the bug early by adding WARN_ON(ref->percpu_count_ptr & __PERCPU_REF_DEAD) after wait_event().
--
Ming Lei
Re: [PATCH v2 5/6] blk-mq: fix freeze queue race
In reply to Akinobu MitaQuoted 1 line · Akinobu Mita
There are several race conditions while freezing queue.
...
Quoted 10 lines
Also,
percpu_ref_reinit()andpercpu_ref_kill()must not be executed at the same time. Because both functions could call__percpu_ref_switch_to_percpu()which adds the bias value and initialize percpu counter.Fix those races by serializing with per-queue mutex.
Signed-off-by Akinobu Mita <[email protected]>Cc Jens Axboe <[email protected]>Cc Ming Lei <[email protected]>
Yeap, all of the kill/reinit/switch mode functions assume caller side synchronization.
Thanks.
Signature · 1 line
tejun
PATCH v2 6/6 blk-mq: fix deadlock when reading cpu_list
In reply to Akinobu MitaCPU hotplug handling for blk-mq (blk_mq_queue_reinit) acquires all_q_mutex in blk_mq_queue_reinit_notify() and then removes sysfs entries by blk_mq_sysfs_unregister(). Removing sysfs entry needs to be blocked until the active reference of the kernfs_node to be zero.
On the other hand, reading blk_mq_hw_sysfs_cpu sysfs entry (e.g. /sys/block/nullb0/mq/0/cpu_list) acquires all_q_mutex in blk_mq_hw_sysfs_cpus_show().
If these happen at the same time, a deadlock can happen. Because one can wait for the active reference to be zero with holding all_q_mutex, and the other tries to acquire all_q_mutex with holding the active reference.
The reason that all_q_mutex is acquired in blk_mq_hw_sysfs_cpus_show() is to avoid reading an imcomplete hctx->cpumask. Since reading sysfs entry for blk-mq needs to acquire q->sysfs_lock, we can avoid deadlock and reading an imcomplete hctx->cpumask by protecting q->sysfs_lock while hctx->cpumask is being updated.
--- block/blk-mq-sysfs.c | 4 ---- block/blk-mq.c | 17 +++++++---------- block/blk-mq.h | 2 -- 3 files changed, 7 insertions(+), 16 deletions(-)
block/blk-mq-sysfs.c +0 -4
@@ -218,8 +218,6 @@ static ssize_t blk_mq_hw_sysfs_cpus_show(struct blk_mq_hw_ctx *hctx, char *page)unsigned int i, first =1 ;ssize_t ret =0 ; -blk_mq_disable_hotplug (); -for_each_cpu (i, hctx->cpumask) {if (first) ret +=sprintf (ret + page,"%u" , i);
@@ -229,8 +227,6 @@ static ssize_t blk_mq_hw_sysfs_cpus_show(struct blk_mq_hw_ctx *hctx, char *page) first =0 ; } -blk_mq_enable_hotplug (); - ret +=sprintf (ret + page,"\n" );return ret; }
block/blk-mq.c +7 -10
@@ -1815,6 +1815,11 @@ static void blk_mq_map_swqueue(struct request_queue *q,struct blk_mq_ctx *ctx;struct blk_mq_tag_set *set = q->tag_set; +/* +* Avoid others reading imcomplete hctx->cpumask through sysfs +*/ +mutex_lock (&q->sysfs_lock); +queue_for_each_hw_ctx (q, hctx, i) {cpumask_clear (hctx->cpumask); hctx->nr_ctx =0 ;
@@ -1835,6 +1840,8 @@ static void blk_mq_map_swqueue(struct request_queue *q, hctx->ctxs[hctx->nr_ctx++] = ctx; } +mutex_unlock (&q->sysfs_lock); +queue_for_each_hw_ctx (q, hctx, i) {struct blk_mq_ctxmap *map = &hctx->ctx_map;
@@ -2321,16 +2328,6 @@ int blk_mq_update_nr_requests(struct request_queue *q, unsigned int nr)return ret; } -void blk_mq_disable_hotplug (void ) -{ -mutex_lock (&all_q_mutex); -} - -void blk_mq_enable_hotplug (void ) -{ -mutex_unlock (&all_q_mutex); -} -static int __init blk_mq_init (void ) {blk_mq_cpu_init ();
block/blk-mq.h +0 -2
@@ -44,8 +44,6 @@ void blk_mq_init_cpu_notifier(struct blk_mq_cpu_notifier *notifier,void blk_mq_register_cpu_notifier (struct blk_mq_cpu_notifier *notifier);void blk_mq_unregister_cpu_notifier (struct blk_mq_cpu_notifier *notifier);void blk_mq_cpu_init (void ); -void blk_mq_enable_hotplug (void ); -void blk_mq_disable_hotplug (void );/* * CPU -> queue mappings
Signature · 1 line
1.9.1