Fix handling of compat_siginfo_t
cover Fix handling of compat_siginfo_t
The current handling of compat_siginfo_t is a mess: each architecture has its own implementation, all of which are incorrect in different ways. This patch series replaces all of the arch-specific versions with a single generic one that is guaranteed to produce the same results as a 32-bit kernel.
Most architectures are able to use the generic compat_siginfo_t, except x86 and MIPS. MIPS uses a slightly different compat_siginfo_t structure for ABI reasons but can still use the generic copy_siginfo_{to,from}_user32. x86 can't use the generic versions because it needs special handling for __SI_CHLD for x32 tasks.
One issue that isn't resolved in this series is sending signals between a 32-bit process and 64-bit process. Sending a si_int will work correctly, but a si_ptr value will likely get corrupted due to the different layouts of the 32-bit and 64-bit siginfo_t structures.
signalfd_copyinfo was also modified to properly generate data for compat tasks. In particular the ssi_ptr and ssi_data members need to be sign-extended to 64 bits rather than zero-extended, since that is the behavior in 32-bit kernels.
This series has been tested on x86_64 and arm64.
Amanieu d'Antras (20):
compat: Add generic compat_siginfo_t
compat: Add generic copy_siginfo_{to,from}_user32
x86: Update compat_siginfo_t to be closer to the generic version
x86: Rewrite copy_siginfo_{to,from}_user32
mips: Clean up compat_siginfo_t
mips: Use generic copy_siginfo_{to,from}_user32
arm64: Use generic compat_siginfo_t
arm64: Use generic copy_siginfo_{to,from}_user32
parisc: Use generic compat_siginfo_t
parsic: Use generic copy_siginfo_{to,from}_user32
s390: Use generic compat_siginfo_t
s390: Use generic copy_siginfo_{to,from}_user32
powerpc: Use generic compat_siginfo_t
powerpc: Use generic copy_siginfo_{to,from}_user32
tile: Use generic compat_siginfo_t
tile: Use generic copy_siginfo_{to,from}_user32
sparc: Use generic compat_siginfo_t
sparc: Use generic copy_siginfo_{to,from}_user32
signalfd: Fix some issues in signalfd_copyinfo
signal: Remove unnecessary zero-initialization of siginfo_t
arch/arm64/include/asm/compat.h | 59 --------- arch/arm64/kernel/signal32.c | 85 ------------ arch/mips/include/asm/compat.h | 63 +++++---- arch/mips/kernel/signal32.c | 62 --------- arch/parisc/include/asm/compat.h | 52 -------- arch/parisc/kernel/signal32.c | 102 --------------- arch/powerpc/include/asm/compat.h | 60 --------- arch/powerpc/kernel/signal_32.c | 72 +--------- arch/s390/include/asm/compat.h | 51 -------- arch/s390/kernel/compat_signal.c | 102 --------------- arch/sparc/include/asm/compat.h | 54 -------- arch/sparc/kernel/signal32.c | 69 ---------- arch/tile/include/asm/compat.h | 57 -------- arch/tile/kernel/compat_signal.c | 75 ----------- arch/x86/include/asm/compat.h | 39 ++++-- arch/x86/kernel/signal_compat.c | 269 +++++++++++++++++++++++++++----------- fs/signalfd.c | 58 +++++--- include/linux/compat.h | 66 +++++++++- kernel/compat.c | 204 +++++++++++++++++++++++++++++ kernel/ptrace.c | 1 - kernel/signal.c | 16 ++- 21 files changed, 574 insertions(+), 1042 deletions(-)
Signature · 1 line
2.6.1
PATCH 1/20 compat: Add generic compat_siginfo_t
This matches the normal siginfo_t as closely as possible, unlike some architecture-specific versions which are missing some fields.
--- arch/arm64/include/asm/compat.h | 2 ++ arch/mips/include/asm/compat.h | 1 + arch/parisc/include/asm/compat.h | 2 ++ arch/powerpc/include/asm/compat.h | 1 + arch/s390/include/asm/compat.h | 2 ++ arch/sparc/include/asm/compat.h | 1 + arch/tile/include/asm/compat.h | 1 + arch/x86/include/asm/compat.h | 2 ++ include/linux/compat.h | 66 ++++++++++++++++++++++++++++++++++++++- 9 files changed, 77 insertions(+), 1 deletion(-)
arch/arm64/include/asm/compat.h +2 -0
@@ -155,6 +155,8 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T + typedef struct compat_siginfo { int si_signo; int si_errno;
arch/mips/include/asm/compat.h +1 -0
@@ -130,6 +130,7 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T #define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/parisc/include/asm/compat.h +2 -0
@@ -134,6 +134,8 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T + typedef struct compat_siginfo { int si_signo; int si_errno;
arch/powerpc/include/asm/compat.h +1 -0
@@ -124,6 +124,7 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T #define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/s390/include/asm/compat.h +2 -0
@@ -192,6 +192,8 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T + typedef struct compat_siginfo { int si_signo; int si_errno;
arch/sparc/include/asm/compat.h +1 -0
@@ -153,6 +153,7 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T #define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/tile/include/asm/compat.h +1 -0
@@ -115,6 +115,7 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T #define COMPAT_SI_PAD_SIZE (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/x86/include/asm/compat.h +2 -0
@@ -130,6 +130,8 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +#define HAVE_ARCH_COMPAT_SIGINFO_T + typedef struct compat_siginfo { int si_signo; int si_errno;
include/linux/compat.h +65 -1
72 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 2/20 compat: Add generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'AntrasThese routines try to match the behavior of native 32-bit kernels as closely as possible. They will replace architecture-specific versions that are missing support for some fields.
The only problematic situation is when sending a si_ptr from a 32-bit process to a 64-bit process or vice-versa, but this has never worked correctly in the past anyways.
--- arch/arm64/include/asm/compat.h | 2 + arch/mips/include/asm/compat.h | 2 + arch/parisc/include/asm/compat.h | 2 + arch/powerpc/include/asm/compat.h | 2 + arch/s390/include/asm/compat.h | 2 + arch/sparc/include/asm/compat.h | 2 + arch/tile/include/asm/compat.h | 2 + arch/x86/include/asm/compat.h | 2 + kernel/compat.c | 204 ++++++++++++++++++++++++++++++++++++++ kernel/signal.c | 12 ++- 10 files changed, 227 insertions(+), 5 deletions(-)
arch/arm64/include/asm/compat.h +2 -0
@@ -156,6 +156,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 typedef struct compat_siginfo { int si_signo;
arch/mips/include/asm/compat.h +2 -0
@@ -131,6 +131,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 #define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/parisc/include/asm/compat.h +2 -0
@@ -135,6 +135,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 typedef struct compat_siginfo { int si_signo;
arch/powerpc/include/asm/compat.h +2 -0
@@ -125,6 +125,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 #define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/s390/include/asm/compat.h +2 -0
@@ -193,6 +193,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 typedef struct compat_siginfo { int si_signo;
arch/sparc/include/asm/compat.h +2 -0
@@ -154,6 +154,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 #define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/tile/include/asm/compat.h +2 -0
@@ -116,6 +116,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 #define COMPAT_SI_PAD_SIZE (128/sizeof(int) - 3) typedef struct compat_siginfo {
arch/x86/include/asm/compat.h +2 -0
@@ -131,6 +131,8 @@ typedef union compat_sigval { } compat_sigval_t;#define HAVE_ARCH_COMPAT_SIGINFO_T +#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 +#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 typedef struct compat_siginfo { int si_signo;
kernel/compat.c +204 -0
207 lines not on this page · raw message
kernel/signal.c +7 -5
@@ -2713,11 +2713,13 @@ int copy_siginfo_to_user(siginfo_t __user *to, const siginfo_t *from)return __copy_to_user (to, from,sizeof (siginfo_t)) ? -EFAULT :0 ;/* -* If you change siginfo_t structure, please be sure -* this code is fixed accordingly. -* Please remember to update the signalfd_copyinfo() function -* inside fs/signalfd.c too, in case siginfo_t changes. -* It should never copy any pad contained in the structure +* If you change siginfo_t structure, please be sure that +* all these functions are fixed accordingly: +* copy_siginfo_to_user +* copy_siginfo_to_user32 +* copy_siginfo_from_user32 +* signalfd_copyinfo +* They should never copy any pad contained in the structure * to avoid security leaks, but must copy the generic * 3 ints plus the relevant union member. */
Signature · 1 line
2.6.1
PATCH 3/20 x86: Update compat_siginfo_t to be closer to the generic version
In reply to Amanieu d'Antrasx86 can't use the generic compat_siginfo_t because it needs to support x32, so we just change it to be closer to the generic version.
The only significant change is the addition of several fields in _sigfault that were previously omitted.
--- arch/x86/include/asm/compat.h | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-)
arch/x86/include/asm/compat.h +21 -14
@@ -130,6 +130,7 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +/* Need special handling for SIGCHLD on x32 */ #define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32
@@ -140,12 +141,12 @@ typedef struct compat_siginfo {int si_code;union { -int _pad[128 /sizeof (int ) -3 ]; +int _pad[128 /sizeof (int ) -3 ];/* kill() */ struct { -unsigned int _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ +compat_pid_t _pid;/* sender's pid */ +__compat_uid32_t _uid;/* sender's uid */ } _kill;/* POSIX.1b timers */
@@ -153,21 +154,19 @@ typedef struct compat_siginfo {compat_timer_t _tid;/* timer id */ int _overrun;/* overrun count */ compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ -int _overrun_incr;/* amount to add to overrun */ } _timer;/* POSIX.1b signals */ struct { -unsigned int _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ +compat_pid_t _pid;/* sender's pid */ +__compat_uid32_t _uid;/* sender's uid */ compat_sigval_t _sigval; } _rt;/* SIGCHLD */ struct { -unsigned int _pid;/* which child */ -unsigned int _uid;/* sender's uid */ +compat_pid_t _pid;/* which child */ +__compat_uid32_t _uid;/* sender's uid */ int _status;/* exit code */ compat_clock_t _utime;compat_clock_t _stime;
@@ -175,7 +174,7 @@ typedef struct compat_siginfo {/* SIGCHLD (x32 version) */ struct { -unsigned int _pid;/* which child */ +compat_pid_t _pid;/* which child */ unsigned int _uid;/* sender's uid */ int _status;/* exit code */ compat_s64 _utime;
@@ -184,19 +183,27 @@ typedef struct compat_siginfo {/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ struct { -unsigned int _addr;/* faulting insn/memory ref. */ +compat_uptr_t _addr;/* faulting insn/memory ref. */ +#ifdef __ARCH_SI_TRAPNO +int _trapno;/* TRAP # which caused the signal */ +#endif +short _addr_lsb;/* LSB of the reported address */ +struct { +compat_uptr_t _lower; +compat_uptr_t _upper; + } _addr_bnd; } _sigfault;/* SIGPOLL */ struct { -int _band;/* POLL_IN, POLL_OUT, POLL_MSG */ +compat_long_t _band;/* POLL_IN, POLL_OUT, POLL_MSG */ int _fd; } _sigpoll;struct { -unsigned int _call_addr;/* calling insn */ +compat_uptr_t _call_addr;/* calling insn */ int _syscall;/* triggering system call number */ -unsigned int _arch;/* AUDIT_ARCH_* of syscall */ +compat_uint_t _arch;/* AUDIT_ARCH_* of syscall */ } _sigsys; } _sifields; } compat_siginfo_t;
Signature · 1 line
2.6.1
PATCH 4/20 x86: Rewrite copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antrasx86 can't use the generic versions because it needs to support x32, so we replace the ad-hoc implementations with something that is closer to the generic versions.
Unlike the previous implementation, this one guarantees that the compat behavior is identical to that of a 32-bit kernel.
--- arch/x86/kernel/signal_compat.c | 269 +++++++++++++++++++++++++++++----------- 1 file changed, 194 insertions(+), 75 deletions(-)
arch/x86/kernel/signal_compat.c +194 -75
@@ -1,95 +1,214 @@#include <linux/compat.h> #include <linux/uaccess.h> -int copy_siginfo_to_user32 (compat_siginfo_t __user *to,const siginfo_t *from) +int copy_siginfo_to_user32 (struct compat_siginfo __user *to,const siginfo_t *from) { -int err =0 ; +int err, si_code;bool ia32 =test_thread_flag (TIF_IA32 ); -if (!access_ok (VERIFY_WRITE , to,sizeof (compat_siginfo_t))) +if (!access_ok (VERIFY_WRITE , to,sizeof (siginfo_t)))return -EFAULT ; - put_user_try { -/* If you change siginfo_t structure, please make sure that -this code is fixed accordingly. -It should never copy any pad contained in the structure -to avoid security leaks, but must copy the generic -3 ints plus the relevant union member. */ -put_user_ex (from->si_signo, &to->si_signo); -put_user_ex (from->si_errno, &to->si_errno); -put_user_ex ((short )from->si_code, &to->si_code); +/* +* Get the user-visible si_code by hiding the top 16 bits if this is a +* kernel-generated signal. +*/ + si_code = from->si_code <0 ? from->si_code : (short )from->si_code; -if (from->si_code <0 ) { -put_user_ex (from->si_pid, &to->si_pid); -put_user_ex (from->si_uid, &to->si_uid); -put_user_ex (ptr_to_compat (from->si_ptr), &to->si_ptr); +/* +* If you change siginfo_t structure, please be sure that +* all these functions are fixed accordingly: +* copy_siginfo_to_user +* copy_siginfo_to_user32 +* copy_siginfo_from_user32 +* signalfd_copyinfo +* They should never copy any pad contained in the structure +* to avoid security leaks, but must copy the generic +* 3 ints plus the relevant union member. +*/ + err =__put_user (from->si_signo, &to->si_signo); + err |=__put_user (from->si_errno, &to->si_errno); + err |=__put_user (si_code, &to->si_code); +if (from->si_code <0 ) { + err |=__copy_to_user (to->_sifields._pad, from->_sifields._pad,SI_PAD_SIZE *sizeof (int )) + ? -EFAULT :0 ; +return err; + } +switch (from->si_code & __SI_MASK) { +case __SI_KILL: + err |=__put_user (from->si_pid, &to->si_pid); + err |=__put_user (from->si_uid, &to->si_uid); +break ; +case __SI_TIMER: + err |=__put_user (from->si_tid, &to->si_tid); + err |=__put_user (from->si_overrun, &to->si_overrun); +/* +* Get the sigval from si_int, which matches the convention +* used in get_compat_sigevent. +*/ + err |=__put_user (from->si_int, &to->si_int); +break ; +case __SI_POLL: + err |=__put_user (from->si_band, &to->si_band); + err |=__put_user (from->si_fd, &to->si_fd); +break ; +case __SI_FAULT: + err |=__put_user (ptr_to_compat (from->si_addr), &to->si_addr); +#ifdef __ARCH_SI_TRAPNO + err |=__put_user (from->si_trapno, &to->si_trapno); +#endif +#ifdef BUS_MCEERR_AO +/* +* Other callers might not initialize the si_lsb field, +* so check explicitly for the right codes here. +*/ +if (from->si_signo ==SIGBUS && + (from->si_code ==BUS_MCEERR_AR || from->si_code ==BUS_MCEERR_AO )) + err |=__put_user (from->si_addr_lsb, &to->si_addr_lsb); +#endif +#ifdef SEGV_BNDERR +if (from->si_signo ==SIGSEGV && from->si_code ==SEGV_BNDERR ) { + err |=__put_user (ptr_to_compat (from->si_lower), &to->si_lower); + err |=__put_user (ptr_to_compat (from->si_upper), &to->si_upper); + } +#endif +break ; +case __SI_CHLD: + err |=__put_user (from->si_pid, &to->si_pid); + err |=__put_user (from->si_uid, &to->si_uid); + err |=__put_user (from->si_status, &to->si_status); +if (ia32) { + err |=__put_user (from->si_utime, &to->si_utime); + err |=__put_user (from->si_stime, &to->si_stime); }else { -/* -* First 32bits of unions are always present: -* si_pid === si_band === si_tid === si_addr(LS half) -*/ -put_user_ex (from->_sifields._pad[0 ], - &to->_sifields._pad[0 ]); -switch (from->si_code >>16 ) { -case __SI_FAULT >>16 : -break ; -case __SI_SYS >>16 : -put_user_ex (from->si_syscall, &to->si_syscall); -put_user_ex (from->si_arch, &to->si_arch); -break ; -case __SI_CHLD >>16 : -if (ia32) { -put_user_ex (from->si_utime, &to->si_utime); -put_user_ex (from->si_stime, &to->si_stime); - }else { -put_user_ex (from->si_utime, &to->_sifields._sigchld_x32._utime); -put_user_ex (from->si_stime, &to->_sifields._sigchld_x32._stime); - } -put_user_ex (from->si_status, &to->si_status); -/* FALL THROUGH */ -default : -case __SI_KILL >>16 : -put_user_ex (from->si_uid, &to->si_uid); -break ; -case __SI_POLL >>16 : -put_user_ex (from->si_fd, &to->si_fd); -break ; -case __SI_TIMER >>16 : -put_user_ex (from->si_overrun, &to->si_overrun); -put_user_ex (ptr_to_compat (from->si_ptr), - &to->si_ptr); -break ; -/* This is not generated by the kernel as of now. */ -case __SI_RT >>16 : -case __SI_MESGQ >>16 : -put_user_ex (from->si_uid, &to->si_uid); -put_user_ex (from->si_int, &to->si_int); -break ; - } + err |=__put_user (from->si_utime, &to->_sifields._sigchld_x32._utime); + err |=__put_user (from->si_stime, &to->_sifields._sigchld_x32._stime); } - }put_user_catch (err); - +break ; +case __SI_RT:/* This is not generated by the kernel as of now. */ +case __SI_MESGQ:/* But this is */ + err |=__put_user (from->si_pid, &to->si_pid); + err |=__put_user (from->si_uid, &to->si_uid); +/* +* Get the sigval from si_int, which matches the convention +* used in get_compat_sigevent. +*/ + err |=__put_user (from->si_int, &to->si_int); +break ; +#ifdef __ARCH_SIGSYS +case __SI_SYS: + err |=__put_user (ptr_to_compat (from->si_call_addr), &to->si_call_addr); + err |=__put_user (from->si_syscall, &to->si_syscall); + err |=__put_user (from->si_arch, &to->si_arch); +break ; +#endif +default :/* this is just in case for now ... */ + err |=__put_user (from->si_pid, &to->si_pid); + err |=__put_user (from->si_uid, &to->si_uid); +break ; + }return err; } -int copy_siginfo_from_user32 (siginfo_t *to,compat_siginfo_t __user *from) +int copy_siginfo_from_user32 (siginfo_t *to,struct compat_siginfo __user *from) { -int err =0 ; -u32 ptr32; +int err; +compat_uptr_t ptr32; +bool ia32 =test_thread_flag (TIF_IA32 ); -if (!access_ok (VERIFY_READ , from,sizeof (compat_siginfo_t))) +if (!access_ok (VERIFY_READ , from,sizeof (siginfo_t)))return -EFAULT ; - get_user_try { -get_user_ex (to->si_signo, &from->si_signo); -get_user_ex (to->si_errno, &from->si_errno); -get_user_ex (to->si_code, &from->si_code); - -get_user_ex (to->si_pid, &from->si_pid); -get_user_ex (to->si_uid, &from->si_uid); -get_user_ex (ptr32, &from->si_ptr); - to->si_ptr =compat_ptr (ptr32); - }get_user_catch (err); - +/* +* If you change siginfo_t structure, please be sure that +* all these functions are fixed accordingly: +* copy_siginfo_to_user +* copy_siginfo_to_user32 +* copy_siginfo_from_user32 +* signalfd_copyinfo +* They should never copy any pad contained in the structure +* to avoid security leaks, but must copy the generic +* 3 ints plus the relevant union member. +*/ + err =__get_user (to->si_signo, &from->si_signo); + err |=__get_user (to->si_errno, &from->si_errno); + err |=__get_user (to->si_code, &from->si_code); +if (to->si_code <0 ) { +/* +* Note that the compat union may be larger than the normal one due to +* alignment. The copying here causes us to lose the last 4 bytes of +* data, but this shouldn't be too much of a problem in practice. +*/ + err |=__copy_from_user (to->_sifields._pad, from->_sifields._pad,SI_PAD_SIZE *sizeof (int )) + ? -EFAULT :0 ; +return err; + } +switch (to->si_code & __SI_MASK) { +case __SI_KILL: + err |=__get_user (to->si_pid, &from->si_pid); + err |=__get_user (to->si_uid, &from->si_uid); +break ; +case __SI_TIMER: + err |=__get_user (to->si_tid, &from->si_tid); + err |=__get_user (to->si_overrun, &from->si_overrun); +/* +* Put the sigval in si_int, which matches the convention +* used in get_compat_sigevent. +*/ + to->si_ptr =0 ;/* Avoid uninitialized bits in the union */ + err |=__get_user (to->si_int, &from->si_int); +break ; +case __SI_POLL: + err |=__get_user (to->si_band, &from->si_band); + err |=__get_user (to->si_fd, &from->si_fd); +break ; +case __SI_FAULT: + err |=__get_user (ptr32, &from->si_addr); + to->si_addr =compat_ptr (ptr32); +#ifdef __ARCH_SI_TRAPNO + err |=__get_user (to->si_trapno, &from->si_trapno); +#endif + err |=__get_user (to->si_addr_lsb, &from->si_addr_lsb); + err |=__get_user (ptr32, &from->si_lower); + to->si_lower =compat_ptr (ptr32); + err |=__get_user (ptr32, &from->si_upper); + to->si_upper =compat_ptr (ptr32); +break ; +case __SI_CHLD: + err |=__get_user (to->si_pid, &from->si_pid); + err |=__get_user (to->si_uid, &from->si_uid); + err |=__get_user (to->si_status, &from->si_status); +if (ia32) { + err |=__get_user (to->si_utime, &from->si_utime); + err |=__get_user (to->si_stime, &from->si_stime); + }else { + err |=__get_user (to->si_utime, &from->_sifields._sigchld_x32._utime); + err |=__get_user (to->si_stime, &from->_sifields._sigchld_x32._stime); + } +break ; +case __SI_RT:/* This is not generated by the kernel as of now. */ +case __SI_MESGQ:/* But this is */ + err |=__get_user (to->si_pid, &from->si_pid); + err |=__get_user (to->si_uid, &from->si_uid); +/* +* Put the sigval in si_int, which matches the convention +* used in get_compat_sigevent. +*/ + to->si_ptr =0 ;/* Avoid uninitialized bits in the union */ + err |=__get_user (to->si_int, &from->si_int); +break ; +#ifdef __ARCH_SIGSYS +case __SI_SYS: + err |=__get_user (ptr32, &from->si_call_addr); + to->si_call_addr =compat_ptr (ptr32); + err |=__get_user (to->si_syscall, &from->si_syscall); + err |=__get_user (to->si_arch, &from->si_arch); +break ; +#endif +default :/* this is just in case for now ... */ + err |=__get_user (to->si_pid, &from->si_pid); + err |=__get_user (to->si_uid, &from->si_uid); +break ; + }return err; }
Signature · 1 line
2.6.1
kbuild test robot
build botRe: [PATCH 04/20] x86: Rewrite copy_siginfo_{to,from}_user32
url: https://github.com/0day-ci/linux/commits/Amanieu-d-Antras/Fix-handling-of-compat_siginfo_t/20151015-051137 reproduce:
Hi Amanieu,
[auto build test WARNING on arm64/for-next/core -- if it's inappropriate base, please suggest rules for selecting the more suitable base]
url: https://github.com/0day-ci/linux/commits/Amanieu-d-Antras/Fix-handling-of-compat_siginfo_t/20151015-051137
reproduce:
# apt-get install sparse
make ARCH=x86_64 allmodconfig
make C=1 CF=-D__CHECK_ENDIAN__sparse warnings: (new ones prefixed by >>)
>> arch/x86/kernel/signal_compat.c:158:30: sparse: Using plain integer as NULL pointer
arch/x86/kernel/signal_compat.c:197:30: sparse: Using plain integer as NULL pointer
vim +158 arch/x86/kernel/signal_compat.c
142 err |= __copy_from_user(to->_sifields._pad, from->_sifields._pad, SI_PAD_SIZE * sizeof(int))
143 ? -EFAULT : 0;
144 return err;
145 }
146 switch (to->si_code & __SI_MASK) {
147 case __SI_KILL:
148 err |= __get_user(to->si_pid, &from->si_pid);
149 err |= __get_user(to->si_uid, &from->si_uid);
150 break;
151 case __SI_TIMER:
152 err |= __get_user(to->si_tid, &from->si_tid);
153 err |= __get_user(to->si_overrun, &from->si_overrun);
154 /*
155 * Put the sigval in si_int, which matches the convention
156 * used in get_compat_sigevent.
157 */
> 158 to->si_ptr = 0; /* Avoid uninitialized bits in the union */
159 err |= __get_user(to->si_int, &from->si_int);
160 break;
161 case __SI_POLL:
162 err |= __get_user(to->si_band, &from->si_band);
163 err |= __get_user(to->si_fd, &from->si_fd);
164 break;
165 case __SI_FAULT:
166 err |= __get_user(ptr32, &from->si_addr);
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Oleg Nesterov
maintainerRe: [PATCH 04/20] x86: Rewrite copy_siginfo_{to,from}_user32
In reply to Amanieu d'AntrasOOH ;) I'll try to look at this patch and the changes in the generic code later. A couple of nits right now.
Please CC x86 maintainers, not only [email protected].
Please do not remove get/put_user_ex from this code. And this reminds me that we can improve *user_try/*user_catch ...
arch/x86/kernel/signal_compat.c line 9
Quoted 10 lines · Amanieu d'Antras
arch/x86/kernel/signal_compat.c +3
-3-int copy_siginfo_to_user32 (compat_siginfo_t __user *to,const siginfo_t *from) +int copy_siginfo_to_user32 (struct compat_siginfo __user *to,const siginfo_t *from) { -int err =0 ; +int err, si_code;bool ia32 =test_thread_flag (TIF_IA32 ); -if (!access_ok (VERIFY_WRITE , to,sizeof (compat_siginfo_t))) +if (!access_ok (VERIFY_WRITE , to,sizeof (siginfo_t)))
Why? This looks wrong.
arch/x86/kernel/signal_compat.c line 35
Quoted 4 lines
arch/x86/kernel/signal_compat.c +4
-0+if (from->si_code <0 ) { + err |=__copy_to_user (to->_sifields._pad, from->_sifields._pad,SI_PAD_SIZE *sizeof (int )) + ? -EFAULT :0 ; +return err;
I think you should split this patch. And this change (don't interpet, just copy) should go as a separate change.
arch/x86/kernel/signal_compat.c line 38
Quoted 2 lines
arch/x86/kernel/signal_compat.c +2
-0+switch (from->si_code & __SI_MASK) { +case __SI_KILL:
I agree, this looks better than ">> 16", but I'd suggest a separate change too.
[...snip...]
the rest looks unreviewable because you didn't split it and because you removed try/catch ;) The same for copy-from-user.
Please help us to understand these changes and make the more reviewable patches if possible. Personally I think you have a point.
Oleg.
Re: [PATCH 04/20] x86: Rewrite copy_siginfo_{to,from}_user32
Quoted 8 lines · Oleg Nesterov
OOH ;) I'll try to look at this patch and the changes in the generic code later. A couple of nits right now.
Please CC x86 maintainers, not only [email protected].
Please do not remove get/put_user_ex from this code. And this reminds me that we can improve *user_try/*user_catch ...
Quoted 7 lines
[...snip...]
the rest looks unreviewable because you didn't split it and because you removed try/catch ;) The same for copy-from-user.
Please help us to understand these changes and make the more reviewable patches if possible. Personally I think you have a point.
What I did here was replace the old x86-specific version with the generic version, which I then modified to support x32. If you compare it with the generic version, the only difference is the addition of the ia32 flag. The intent was to make it as close as possible to the generic version, which makes it easier to update both at the same time when a new siginfo_t fields is added.
This is also why I didn't use put_user_try/get_user_try: it would make the x86 version unnecessarily diverge from the generic version, since those macros only exist in the x86 architecture.
PATCH 5/20 mips: Clean up compat_siginfo_t
In reply to Amanieu d'AntrasWhile mips can't use the generic compat_siginfo_t directly because its si_code and si_errno are inverted, we can still make it as close to the generic version as possible. This makes it easier to update when new members are added to siginfo_t.
The main changes are adding a missing _sigsys union member and eliminating the unused _irix_sigchld one.
--- arch/mips/include/asm/compat.h | 62 ++++++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 29 deletions(-)
arch/mips/include/asm/compat.h +33 -29
@@ -130,10 +130,10 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; +/* We can't use generic compat_siginfo_t because our si_code and si_errno are swapped */ #define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define SI_PAD_SIZE32 (128/sizeof(int) - 3) typedef struct compat_siginfo { int si_signo;
@@ -141,57 +141,61 @@ typedef struct compat_siginfo {int si_errno;union { -int _pad[SI_PAD_SIZE32 ]; +int _pad[128 /sizeof (int ) -3 ];/* kill() */ struct {compat_pid_t _pid;/* sender's pid */ -__compat_uid_t _uid;/* sender's uid */ +__compat_uid32_t _uid;/* sender's uid */ } _kill; +/* POSIX.1b timers */ +struct { +compat_timer_t _tid;/* timer id */ +int _overrun;/* overrun count */ +compat_sigval_t _sigval;/* same as below */ + } _timer; + +/* POSIX.1b signals */ +struct { +compat_pid_t _pid;/* sender's pid */ +__compat_uid32_t _uid;/* sender's uid */ +compat_sigval_t _sigval; + } _rt; +/* SIGCHLD */ struct {compat_pid_t _pid;/* which child */ -__compat_uid_t _uid;/* sender's uid */ +__compat_uid32_t _uid;/* sender's uid */ int _status;/* exit code */ compat_clock_t _utime;compat_clock_t _stime; } _sigchld; -/* IRIX SIGCHLD */ -struct { -compat_pid_t _pid;/* which child */ -compat_clock_t _utime; -int _status;/* exit code */ -compat_clock_t _stime; - } _irix_sigchld; -/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ struct { -s32 _addr;/* faulting insn/memory ref. */ +compat_uptr_t _addr;/* faulting insn/memory ref. */ +#ifdef __ARCH_SI_TRAPNO +int _trapno;/* TRAP # which caused the signal */ +#endif +short _addr_lsb;/* LSB of the reported address */ +struct { +compat_uptr_t _lower; +compat_uptr_t _upper; + } _addr_bnd; } _sigfault; -/* SIGPOLL, SIGXFSZ (To do ...) */ +/* SIGPOLL */ struct { -int _band;/* POLL_IN, POLL_OUT, POLL_MSG */ +compat_long_t _band;/* POLL_IN, POLL_OUT, POLL_MSG */ int _fd; } _sigpoll; -/* POSIX.1b timers */ -struct { -timer_t _tid;/* timer id */ -int _overrun;/* overrun count */ -compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ - } _timer; - -/* POSIX.1b signals */ struct { -compat_pid_t _pid;/* sender's pid */ -__compat_uid_t _uid;/* sender's uid */ -compat_sigval_t _sigval; - } _rt; - +compat_uptr_t _call_addr;/* calling insn */ +int _syscall;/* triggering system call number */ +compat_uint_t _arch;/* AUDIT_ARCH_* of syscall */ + } _sigsys; } _sifields; } compat_siginfo_t;
Signature · 1 line
2.6.1
PATCH 6/20 mips: Use generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antras--- arch/mips/include/asm/compat.h | 2 -- arch/mips/kernel/signal32.c | 62 ------------------------------------------ 2 files changed, 64 deletions(-)
arch/mips/include/asm/compat.h +0 -2
@@ -132,8 +132,6 @@ typedef union compat_sigval {/* We can't use generic compat_siginfo_t because our si_code and si_errno are swapped */ #define HAVE_ARCH_COMPAT_SIGINFO_T -#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 -#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 typedef struct compat_siginfo { int si_signo;
arch/mips/kernel/signal32.c +0 -62
68 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 7/20 arm64: Use generic compat_siginfo_t
In reply to Amanieu d'Antras--- arch/arm64/include/asm/compat.h | 60 ----------------------------------------- 1 file changed, 60 deletions(-)
arch/arm64/include/asm/compat.h +0 -60
@@ -155,69 +155,9 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -typedef struct compat_siginfo { -int si_signo; -int si_errno; -int si_code; - -union { -int _pad[128 /sizeof (int ) -3 ]; - -/* kill() */ -struct { -compat_pid_t _pid;/* sender's pid */ -__compat_uid32_t _uid;/* sender's uid */ - } _kill; - -/* POSIX.1b timers */ -struct { -compat_timer_t _tid;/* timer id */ -int _overrun;/* overrun count */ -compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ - } _timer; - -/* POSIX.1b signals */ -struct { -compat_pid_t _pid;/* sender's pid */ -__compat_uid32_t _uid;/* sender's uid */ -compat_sigval_t _sigval; - } _rt; - -/* SIGCHLD */ -struct { -compat_pid_t _pid;/* which child */ -__compat_uid32_t _uid;/* sender's uid */ -int _status;/* exit code */ -compat_clock_t _utime; -compat_clock_t _stime; - } _sigchld; - -/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ -struct { -compat_uptr_t _addr;/* faulting insn/memory ref. */ -short _addr_lsb;/* LSB of the reported address */ - } _sigfault; - -/* SIGPOLL */ -struct { -compat_long_t _band;/* POLL_IN, POLL_OUT, POLL_MSG */ -int _fd; - } _sigpoll; - -/* SIGSYS */ -struct { -compat_uptr_t _call_addr;/* calling user insn */ -int _syscall;/* triggering system call number */ -compat_uint_t _arch;/* AUDIT_ARCH_* of syscall */ - } _sigsys; - } _sifields; -}compat_siginfo_t ; -#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
Signature · 1 line
2.6.1
PATCH 8/20 arm64: Use generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antras--- arch/arm64/include/asm/compat.h | 3 -- arch/arm64/kernel/signal32.c | 85 ----------------------------------------- 2 files changed, 88 deletions(-)
arch/arm64/include/asm/compat.h +0 -3
@@ -155,9 +155,6 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 -#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
arch/arm64/kernel/signal32.c +0 -85
91 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 9/20 parisc: Use generic compat_siginfo_t
In reply to Amanieu d'Antras--- arch/parisc/include/asm/compat.h | 53 ---------------------------------------- 1 file changed, 53 deletions(-)
arch/parisc/include/asm/compat.h +0 -53
@@ -134,62 +134,9 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -typedef struct compat_siginfo { -int si_signo; -int si_errno; -int si_code; - -union { -int _pad[128 /sizeof (int ) -3 ]; - -/* kill() */ -struct { -unsigned int _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ - } _kill; - -/* POSIX.1b timers */ -struct { -compat_timer_t _tid;/* timer id */ -int _overrun;/* overrun count */ -char _pad[sizeof (unsigned int ) -sizeof (int )]; -compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ - } _timer; - -/* POSIX.1b signals */ -struct { -unsigned int _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ -compat_sigval_t _sigval; - } _rt; - -/* SIGCHLD */ -struct { -unsigned int _pid;/* which child */ -unsigned int _uid;/* sender's uid */ -int _status;/* exit code */ -compat_clock_t _utime; -compat_clock_t _stime; - } _sigchld; - -/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ -struct { -unsigned int _addr;/* faulting insn/memory ref. */ - } _sigfault; - -/* SIGPOLL */ -struct { -int _band;/* POLL_IN, POLL_OUT, POLL_MSG */ -int _fd; - } _sigpoll; - } _sifields; -}compat_siginfo_t ; -#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
Signature · 1 line
2.6.1
PATCH 10/20 parsic: Use generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antras--- arch/parisc/include/asm/compat.h | 3 -- arch/parisc/kernel/signal32.c | 102 --------------------------------------- 2 files changed, 105 deletions(-)
arch/parisc/include/asm/compat.h +0 -3
@@ -134,9 +134,6 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 -#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
arch/parisc/kernel/signal32.c +0 -102
105 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 11/20 s390: Use generic compat_siginfo_t
In reply to Amanieu d'Antras--- arch/s390/include/asm/compat.h | 52 ------------------------------------------ 1 file changed, 52 deletions(-)
arch/s390/include/asm/compat.h +0 -52
@@ -192,61 +192,9 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -typedef struct compat_siginfo { -int si_signo; -int si_errno; -int si_code; - -union { -int _pad[128 /sizeof (int ) -3 ]; - -/* kill() */ -struct { -pid_t _pid;/* sender's pid */ -uid_t _uid;/* sender's uid */ - } _kill; - -/* POSIX.1b timers */ -struct { -compat_timer_t _tid;/* timer id */ -int _overrun;/* overrun count */ -compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ - } _timer; - -/* POSIX.1b signals */ -struct { -pid_t _pid;/* sender's pid */ -uid_t _uid;/* sender's uid */ -compat_sigval_t _sigval; - } _rt; - -/* SIGCHLD */ -struct { -pid_t _pid;/* which child */ -uid_t _uid;/* sender's uid */ -int _status;/* exit code */ -compat_clock_t _utime; -compat_clock_t _stime; - } _sigchld; - -/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ -struct { -__u32 _addr;/* faulting insn/memory ref. - pointer */ - } _sigfault; - -/* SIGPOLL */ -struct { -int _band;/* POLL_IN, POLL_OUT, POLL_MSG */ -int _fd; - } _sigpoll; - } _sifields; -}compat_siginfo_t ; -/* * How these fields are to be accessed. */
Signature · 1 line
2.6.1
PATCH 12/20 s390: Use generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antras--- arch/s390/include/asm/compat.h | 3 -- arch/s390/kernel/compat_signal.c | 102 --------------------------------------- 2 files changed, 105 deletions(-)
arch/s390/include/asm/compat.h +0 -3
@@ -192,9 +192,6 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 -#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -/* * How these fields are to be accessed. */
arch/s390/kernel/compat_signal.c +0 -102
108 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 13/20 powerpc: Use generic compat_siginfo_t
In reply to Amanieu d'Antras--- arch/powerpc/include/asm/compat.h | 60 --------------------------------------- 1 file changed, 60 deletions(-)
arch/powerpc/include/asm/compat.h +0 -60
@@ -124,68 +124,8 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define SI_PAD_SIZE32 (128/sizeof(int) - 3) - -typedef struct compat_siginfo { -int si_signo; -int si_errno; -int si_code; - -union { -int _pad[SI_PAD_SIZE32 ]; - -/* kill() */ -struct { -compat_pid_t _pid;/* sender's pid */ -__compat_uid_t _uid;/* sender's uid */ - } _kill; - -/* POSIX.1b timers */ -struct { -compat_timer_t _tid;/* timer id */ -int _overrun;/* overrun count */ -compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ - } _timer; - -/* POSIX.1b signals */ -struct { -compat_pid_t _pid;/* sender's pid */ -__compat_uid_t _uid;/* sender's uid */ -compat_sigval_t _sigval; - } _rt; - -/* SIGCHLD */ -struct { -compat_pid_t _pid;/* which child */ -__compat_uid_t _uid;/* sender's uid */ -int _status;/* exit code */ -compat_clock_t _utime; -compat_clock_t _stime; - } _sigchld; - -/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */ -struct { -unsigned int _addr;/* faulting insn/memory ref. */ - } _sigfault; - -/* SIGPOLL */ -struct { -int _band;/* POLL_IN, POLL_OUT, POLL_MSG */ -int _fd; - } _sigpoll; - -/* SIGSYS */ -struct { -unsigned int _call_addr;/* calling insn */ -int _syscall;/* triggering system call number */ -unsigned int _arch;/* AUDIT_ARCH_* of syscall */ - } _sigsys; - } _sifields; -}compat_siginfo_t ;#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
Signature · 1 line
2.6.1
kbuild test robot
build botRe: [PATCH 13/20] powerpc: Use generic compat_siginfo_t
reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree…
Hi Amanieu,
[auto build test ERROR on arm64/for-next/core -- if it's inappropriate base, please suggest rules for selecting the more suitable base]
url: https://github.com/0day-ci/linux/commits/Amanieu-d-Antras/Fix-handling-of-compat_siginfo_t/20151015-051137 config: powerpc-defconfig (attached as .config)
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=powerpc
Note: the linux-review/Amanieu-d-Antras/Fix-handling-of-compat_siginfo_t/20151015-051137 HEAD 041b7d538bec8eec85a60b4a808bbe3959fcd8c3 builds fine.
It only hurts bisectibility.
All errors (new ones prefixed by >>):
arch/powerpc/kernel/signal_32.c: In function 'copy_siginfo_to_user32':
>> arch/powerpc/kernel/signal_32.c:930:11: error: 'SI_PAD_SIZE32' undeclared (first use in this function)
SI_PAD_SIZE32);
^
arch/powerpc/kernel/signal_32.c:930:11: note: each undeclared identifier is reported only once for each function it appears in
arch/powerpc/kernel/signal_32.c: In function 'copy_siginfo_from_user32':
arch/powerpc/kernel/signal_32.c:976:29: error: 'SI_PAD_SIZE32' undeclared (first use in this function)
from->_sifields._pad, SI_PAD_SIZE32))
^vim +/SI_PAD_SIZE32 +930 arch/powerpc/kernel/signal_32.c
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 924 */
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 925 err = __put_user(s->si_signo, &d->si_signo);
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 926 err |= __put_user(s->si_errno, &d->si_errno);
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 927 err |= __put_user((short)s->si_code, &d->si_code);
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 928 if (s->si_code < 0)
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 929 err |= __copy_to_user(&d->_sifields._pad, &s->_sifields._pad,
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 @930 SI_PAD_SIZE32);
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 931 else switch(s->si_code >> 16) {
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 932 case __SI_CHLD >> 16:
^1da177e arch/ppc64/kernel/signal32.c Linus Torvalds 2005-04-16 933 err |= __put_user(s->si_pid, &d->si_pid);:::::: The code at line 930 was first introduced by commit :::::: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Linux-2.6.12-rc2
:::::: TO: Linus Torvalds <[email protected]> :::::: CC: Linus Torvalds <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
PATCH 14/20 powerpc: Use generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antras--- arch/powerpc/include/asm/compat.h | 3 -- arch/powerpc/kernel/signal_32.c | 72 +-------------------------------------- 2 files changed, 1 insertion(+), 74 deletions(-)
arch/powerpc/include/asm/compat.h +0 -3
@@ -124,9 +124,6 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 -#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
arch/powerpc/kernel/signal_32.c +1 -71
79 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 15/20 tile: Use generic compat_siginfo_t
In reply to Amanieu d'Antras--- arch/tile/include/asm/compat.h | 57 ------------------------------------------ 1 file changed, 57 deletions(-)
arch/tile/include/asm/compat.h +0 -57
@@ -115,65 +115,8 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define COMPAT_SI_PAD_SIZE (128/sizeof(int) - 3) - -typedef struct compat_siginfo { -int si_signo; -int si_errno; -int si_code; - -union { -int _pad[COMPAT_SI_PAD_SIZE ]; - -/* kill() */ -struct { -unsigned int _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ - } _kill; - -/* POSIX.1b timers */ -struct { -compat_timer_t _tid;/* timer id */ -int _overrun;/* overrun count */ -compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ -int _overrun_incr;/* amount to add to overrun */ - } _timer; - -/* POSIX.1b signals */ -struct { -unsigned int _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ -compat_sigval_t _sigval; - } _rt; - -/* SIGCHLD */ -struct { -unsigned int _pid;/* which child */ -unsigned int _uid;/* sender's uid */ -int _status;/* exit code */ -compat_clock_t _utime; -compat_clock_t _stime; - } _sigchld; - -/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ -struct { -unsigned int _addr;/* faulting insn/memory ref. */ -#ifdef __ARCH_SI_TRAPNO -int _trapno;/* TRAP # which caused the signal */ -#endif - } _sigfault; - -/* SIGPOLL */ -struct { -int _band;/* POLL_IN, POLL_OUT, POLL_MSG */ -int _fd; - } _sigpoll; - } _sifields; -}compat_siginfo_t ;#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
Signature · 1 line
2.6.1
PATCH 16/20 tile: Use generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antras--- arch/tile/include/asm/compat.h | 3 -- arch/tile/kernel/compat_signal.c | 75 ---------------------------------------- 2 files changed, 78 deletions(-)
arch/tile/include/asm/compat.h +0 -3
@@ -115,9 +115,6 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 -#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
arch/tile/kernel/compat_signal.c +0 -75
81 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 17/20 sparc: Use generic compat_siginfo_t
In reply to Amanieu d'Antras--- arch/sparc/include/asm/compat.h | 54 ----------------------------------------- 1 file changed, 54 deletions(-)
arch/sparc/include/asm/compat.h +0 -54
@@ -153,62 +153,8 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COMPAT_SIGINFO_T #define HAVE_ARCH_COPY_SIGINFO_TO_USER32 #define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define SI_PAD_SIZE32 (128/sizeof(int) - 3) - -typedef struct compat_siginfo { -int si_signo; -int si_errno; -int si_code; - -union { -int _pad[SI_PAD_SIZE32 ]; - -/* kill() */ -struct { -compat_pid_t _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ - } _kill; - -/* POSIX.1b timers */ -struct { -compat_timer_t _tid;/* timer id */ -int _overrun;/* overrun count */ -compat_sigval_t _sigval;/* same as below */ -int _sys_private;/* not to be passed to user */ - } _timer; - -/* POSIX.1b signals */ -struct { -compat_pid_t _pid;/* sender's pid */ -unsigned int _uid;/* sender's uid */ -compat_sigval_t _sigval; - } _rt; - -/* SIGCHLD */ -struct { -compat_pid_t _pid;/* which child */ -unsigned int _uid;/* sender's uid */ -int _status;/* exit code */ -compat_clock_t _utime; -compat_clock_t _stime; - } _sigchld; - -/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGEMT */ -struct { -u32 _addr;/* faulting insn/memory ref. */ -int _trapno; - } _sigfault; - -/* SIGPOLL */ -struct { -int _band;/* POLL_IN, POLL_OUT, POLL_MSG */ -int _fd; - } _sigpoll; - } _sifields; -}compat_siginfo_t ;#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
Signature · 1 line
2.6.1
PATCH 18/20 sparc: Use generic copy_siginfo_{to,from}_user32
In reply to Amanieu d'Antras--- arch/sparc/include/asm/compat.h | 3 -- arch/sparc/kernel/signal32.c | 69 ----------------------------------------- 2 files changed, 72 deletions(-)
arch/sparc/include/asm/compat.h +0 -3
@@ -153,9 +153,6 @@ typedef union compat_sigval {compat_uptr_t sival_ptr; } compat_sigval_t; -#define HAVE_ARCH_COPY_SIGINFO_TO_USER32 -#define HAVE_ARCH_COPY_SIGINFO_FROM_USER32 -#define COMPAT_OFF_T_MAX 0x7fffffff#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
arch/sparc/kernel/signal32.c +0 -69
75 lines not on this page · raw message
Signature · 1 line
2.6.1
PATCH 19/20 signalfd: Fix some issues in signalfd_copyinfo
In reply to Amanieu d'AntrasThere are several issues here:
1) The value of ssi_ptr was incorrect for compat tasks. It was previously copied directly from si_ptr, which contains garbage for 32-bit processes, especially on big-endian architectures.
2) A SIGSYS would cause various fields to be filled with incorrect values. SIGSYS fields are not in signalfd_siginfo, and it should avoid filling in unrelated fields.
3) ssi_ptr and ssi_int should not be filled in for any unrecognized si_code, but only for those generated by sigqueue. The si_ptr and si_int fields in siginfo_t may not be initialized otherwise.
4) ssi_ptr and ssi_addr values for compat tasks did not match those generated by 32-bit kernels. The values need to be sign-extended to 64 bits rather than zero-extended.
--- fs/signalfd.c | 58 ++++++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 42 insertions(+), 16 deletions(-)
fs/signalfd.c +42 -16
@@ -80,39 +80,66 @@ static unsigned int signalfd_poll(struct file *file, poll_table *wait)static int signalfd_copyinfo (struct signalfd_siginfo __user *uinfo,siginfo_t const *kinfo) { -long err; +long err, ssi_ptr, ssi_addr;BUILD_BUG_ON (sizeof (struct signalfd_siginfo ) !=128 );/* +* ssi_ptr for a compat task should be sourced from si_int instead +* of si_ptr since that is what copy_siginfo_from_user32 and +* get_compat_sigevent use. 32-bit pointer values are sign-extended +* to 64 bits when written to ssi_ptr, which matches the behavior of +* 32-bit kernels. +*/ + ssi_ptr =is_compat_task () ? kinfo->si_int : (long ) kinfo->si_ptr; + +/* * Unused members should be zero ... */ err =__clear_user (uinfo,sizeof (*uinfo));/* -* If you change siginfo_t structure, please be sure -* this code is fixed accordingly. +* If you change siginfo_t structure, please be sure that +* all these functions are fixed accordingly: +* copy_siginfo_to_user +* copy_siginfo_to_user32 +* copy_siginfo_from_user32 +* signalfd_copyinfo +* They should never copy any pad contained in the structure +* to avoid security leaks, but must copy the generic +* 3 ints plus the relevant union member. */ err |=__put_user (kinfo->si_signo, &uinfo->ssi_signo); err |=__put_user (kinfo->si_errno, &uinfo->ssi_errno); err |=__put_user ((short ) kinfo->si_code, &uinfo->ssi_code); +if (kinfo->si_code <0 ) { +/* Grab some standard fields for sigqueue()-generated signals */ + err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); + err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid); + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); + err |=__put_user (kinfo->si_int, &uinfo->ssi_int); +return err ? -EFAULT :sizeof (*uinfo); + }switch (kinfo->si_code & __SI_MASK) {case __SI_KILL: err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid);break ;case __SI_TIMER: - err |=__put_user (kinfo->si_tid, &uinfo->ssi_tid); - err |=__put_user (kinfo->si_overrun, &uinfo->ssi_overrun); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); - err |=__put_user (kinfo->si_int, &uinfo->ssi_int); + err |=__put_user (kinfo->si_tid, &uinfo->ssi_tid); + err |=__put_user (kinfo->si_overrun, &uinfo->ssi_overrun); + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); + err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ;case __SI_POLL: err |=__put_user (kinfo->si_band, &uinfo->ssi_band); err |=__put_user (kinfo->si_fd, &uinfo->ssi_fd);break ;case __SI_FAULT: - err |=__put_user ((long ) kinfo->si_addr, &uinfo->ssi_addr); +/* Ensure that ssi_addr is sign-extended to 64 bits */ + ssi_addr =is_compat_task () ? (int )(long ) kinfo->si_addr : + (long ) kinfo->si_addr; + err |=__put_user (ssi_addr, &uinfo->ssi_addr);#ifdef __ARCH_SI_TRAPNO err |=__put_user (kinfo->si_trapno, &uinfo->ssi_trapno);#endif
@@ -139,21 +166,20 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,case __SI_MESGQ:/* But this is */ err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ; -default : -/* -* This case catches also the signals queued by sigqueue(). -*/ +#ifdef __ARCH_SIGSYS +case __SI_SYS:/* SIGSYS fields are not in signalfd_siginfo */ +break ; +#endif +default :/* this is just in case for now ... */ err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); - err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ; } -return err ? -EFAULT :sizeof (*uinfo); +return err ? -EFAULT :sizeof (*uinfo); } static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info,
Signature · 1 line
2.6.1
PATCH 19/20 signalfd: Fix handling of ssi_ptr and ssi_int in signalfd_copyinfo
In reply to Amanieu d'AntrasThere are several issues here:
1) The value of ssi_ptr was incorrect for 32-bit processes. It was previously copied directly from si_ptr, which contains garbage on 32-bit processes, especially on big-endian architectures.
2) A SIGSYS would cause various fields to be filled with incorrect values. SIGSYS fields are not in signalfd_siginfo, and it should avoid filling in unrelated fields.
3) ssi_ptr and ssi_int should not be filled in for any unrecognized si_code, but only for those generated by sigqueue. The si_ptr and si_int fields in siginfo_t may not be initialized otherwise.
--- fs/signalfd.c | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-)
fs/signalfd.c +31 -11
@@ -80,22 +80,43 @@ static unsigned int signalfd_poll(struct file *file, poll_table *wait)static int signalfd_copyinfo (struct signalfd_siginfo __user *uinfo,siginfo_t const *kinfo) { -long err; +long err, ssi_ptr;BUILD_BUG_ON (sizeof (struct signalfd_siginfo ) !=128 );/* +* ssi_ptr for a compat task should be sourced from si_int instead +* of si_ptr since that is what copy_siginfo_from_user32 and +* get_compat_sigevent use. 32-bit pointer values are sign-extended +* to 64 bits when written to ssi_ptr, which matches the behavior of +* 32-bit kernels. +*/ + ssi_ptr =is_compat_task () ? kinfo->si_int : (long ) kinfo->si_ptr; + +/* * Unused members should be zero ... */ err =__clear_user (uinfo,sizeof (*uinfo));/* -* If you change siginfo_t structure, please be sure -* this code is fixed accordingly. +* If you change siginfo_t structure, please be sure that +* all these functions are fixed accordingly: +* copy_siginfo_to_user +* copy_siginfo_to_user32 +* copy_siginfo_from_user32 +* signalfd_copyinfo +* They should never copy any pad contained in the structure +* to avoid security leaks, but must copy the generic +* 3 ints plus the relevant union member. */ err |=__put_user (kinfo->si_signo, &uinfo->ssi_signo); err |=__put_user (kinfo->si_errno, &uinfo->ssi_errno); err |=__put_user ((short ) kinfo->si_code, &uinfo->ssi_code); +if (kinfo->si_code <0 ) { +/* Write ssi_int and ssi_ptr for sigqueue()-generated signals */ + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); + err |=__put_user (kinfo->si_int, &uinfo->ssi_int); + }switch (kinfo->si_code & __SI_MASK) {case __SI_KILL: err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid);
@@ -104,7 +125,7 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,case __SI_TIMER: err |=__put_user (kinfo->si_tid, &uinfo->ssi_tid); err |=__put_user (kinfo->si_overrun, &uinfo->ssi_overrun); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ;case __SI_POLL:
@@ -139,21 +160,20 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,case __SI_MESGQ:/* But this is */ err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ; +#ifdef __ARCH_SIGSYS +case __SI_SYS:/* SIGSYS fields are not in signalfd_siginfo */ +break ; +#endif default : -/* -* This case catches also the signals queued by sigqueue(). -*/ err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); - err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ; } -return err ? -EFAULT :sizeof (*uinfo); +return err ? -EFAULT :sizeof (*uinfo); } static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info,
Signature · 1 line
2.6.1
Re: [PATCH 19/20] signalfd: Fix handling of ssi_ptr and ssi_int in signalfd_copyinfo
Sorry, this was an old version of the patch that was accidentally sent. Please ignore it.
Quoted 109 lines · Amanieu d'Antras
There are several issues here:
1) The value ofssi_ptrwas incorrect for 32-bit processes. It was previously copied directly fromsi_ptr, which contains garbage on 32-bit processes, especially on big-endian architectures.2) A SIGSYS would cause various fields to be filled with incorrect values. SIGSYS fields are not in
signalfd_siginfo, and it should avoid filling in unrelated fields.3)
ssi_ptrandssi_intshould not be filled in for any unrecognizedsi_code, but only for those generated by sigqueue. Thesi_ptrandsi_intfields insiginfo_tmay not be initialized otherwise.Signed-off-by Amanieu d'Antras <[email protected]>--- fs/signalfd.c | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-)fs/signalfd.c +31
-12@@ -80,22 +80,43 @@ static unsigned int signalfd_poll(struct file *file, poll_table *wait)static int signalfd_copyinfo (struct signalfd_siginfo __user *uinfo,siginfo_t const *kinfo) { -long err; +long err, ssi_ptr;BUILD_BUG_ON (sizeof (struct signalfd_siginfo ) !=128 );/* +* ssi_ptr for a compat task should be sourced from si_int instead +* of si_ptr since that is what copy_siginfo_from_user32 and +* get_compat_sigevent use. 32-bit pointer values are sign-extended +* to 64 bits when written to ssi_ptr, which matches the behavior of +* 32-bit kernels. +*/ + ssi_ptr =is_compat_task () ? kinfo->si_int : (long ) kinfo->si_ptr; + +/* * Unused members should be zero ... */ err =__clear_user (uinfo,sizeof (*uinfo));/* -* If you change siginfo_t structure, please be sure -* this code is fixed accordingly. +* If you change siginfo_t structure, please be sure that +* all these functions are fixed accordingly: +* copy_siginfo_to_user +* copy_siginfo_to_user32 +* copy_siginfo_from_user32 +* signalfd_copyinfo +* They should never copy any pad contained in the structure +* to avoid security leaks, but must copy the generic +* 3 ints plus the relevant union member. */ err |=__put_user (kinfo->si_signo, &uinfo->ssi_signo); err |=__put_user (kinfo->si_errno, &uinfo->ssi_errno); err |=__put_user ((short ) kinfo->si_code, &uinfo->ssi_code); +if (kinfo->si_code <0 ) { +/* Write ssi_int and ssi_ptr for sigqueue()-generated signals */ + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); + err |=__put_user (kinfo->si_int, &uinfo->ssi_int); + }switch (kinfo->si_code & __SI_MASK) {case __SI_KILL: err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid);@@ -104,7 +125,7 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,case __SI_TIMER: err |=__put_user (kinfo->si_tid, &uinfo->ssi_tid); err |=__put_user (kinfo->si_overrun, &uinfo->ssi_overrun); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ;case __SI_POLL:@@ -139,21 +160,20 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,case __SI_MESGQ:/* But this is */ err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); + err |=__put_user (ssi_ptr, &uinfo->ssi_ptr); err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ; +#ifdef __ARCH_SIGSYS +case __SI_SYS:/* SIGSYS fields are not in signalfd_siginfo */ +break ; +#endif default : -/* -* This case catches also the signals queued by sigqueue(). -*/ err |=__put_user (kinfo->si_pid, &uinfo->ssi_pid); err |=__put_user (kinfo->si_uid, &uinfo->ssi_uid); - err |=__put_user ((long ) kinfo->si_ptr, &uinfo->ssi_ptr); - err |=__put_user (kinfo->si_int, &uinfo->ssi_int);break ; } -return err ? -EFAULT :sizeof (*uinfo); +return err ? -EFAULT :sizeof (*uinfo); } static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info, --2.6.1
PATCH 20/20 signal: Remove unnecessary zero-initialization of siginfo_t
In reply to Amanieu d'AntrasThis is no longer required since copy_siginfo_from_user32 now initializes all siginfo_t fields properly.
--- kernel/ptrace.c | 1 - kernel/signal.c | 4 ++-- 2 files changed, 2 insertions(+), 3 deletions(-)
kernel/ptrace.c +0 -1
@@ -1147,7 +1147,6 @@ int compat_ptrace_request(struct task_struct *child, compat_long_t request,break ;case PTRACE_SETSIGINFO : -memset (&siginfo,0 ,sizeof siginfo);if (copy_siginfo_from_user32 ( &siginfo, (struct compat_siginfo __user *) datap)) ret = -EFAULT ;
kernel/signal.c +2 -2
@@ -3022,7 +3022,7 @@ COMPAT_SYSCALL_DEFINE3(rt_sigqueueinfo, int, sig, struct compat_siginfo __user *, uinfo) { - siginfo_t info = {}; + siginfo_t info;int ret =copy_siginfo_from_user32 (&info, uinfo);if (unlikely (ret))return ret;
@@ -3066,7 +3066,7 @@ COMPAT_SYSCALL_DEFINE4(rt_tgsigqueueinfo, int, sig, struct compat_siginfo __user *, uinfo) { - siginfo_t info = {}; + siginfo_t info;if (copy_siginfo_from_user32 (&info, uinfo))return -EFAULT ;
Signature · 1 line
2.6.1