Skip to contentSkip to conversation

armv8: ls1088aqds: Add support of LS1088AQDS

PATCH Superseded Ashish Kumar 1 participant 1 message Feb 15, 2017 Arm (32-bit)

v1 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH 3/3 armv8: ls1088aqds: Add support of LS1088AQDS

This patch add support of LS1088AQDS platform.

The LS1088A QorIQTM Development System (QDS) is a high-performance computing, evaluation, and
development platform that supports the LS1088A QorIQ Architecture processor.

---
 arch/arm/Kconfig                                   |  11 +
 arch/arm/cpu/armv8/Kconfig                         |   2 +-
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig          |  21 +
 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c |   2 +
 arch/arm/cpu/armv8/fsl-layerscape/soc.c            |   1 +
 arch/arm/dts/Makefile                              |   1 +
 arch/arm/dts/fsl-ls1088a-qds.dts                   |  70 +++
 board/freescale/ls1088a/Kconfig                    |  16 +
 board/freescale/ls1088a/MAINTAINERS                |  10 +-
 board/freescale/ls1088a/Makefile                   |   1 +
 board/freescale/ls1088a/ddr.c                      | 119 +---
 board/freescale/ls1088a/ddr.h                      |   9 +-
 board/freescale/ls1088a/eth_ls1088aqds.c           | 650 +++++++++++++++++++++
 board/freescale/ls1088a/ls1088a.c                  | 106 +++-
 board/freescale/ls1088a/ls1088a_qixis.h            |   5 +
 configs/ls1088aqds_qspi_defconfig                  |  27 +
 configs/ls1088ardb_qspi_defconfig                  |   6 -
 include/configs/ls1088a_common.h                   |   8 +-
 include/configs/ls1088aqds.h                       | 403 +++++++++++++
 19 files changed, 1321 insertions(+), 147 deletions(-)
 create mode 100644 arch/arm/dts/fsl-ls1088a-qds.dts
 create mode 100644 board/freescale/ls1088a/eth_ls1088aqds.c
 create mode 100644 configs/ls1088aqds_qspi_defconfig
 create mode 100644 include/configs/ls1088aqds.h
arch/arm/Kconfig +11 -0
index 0c63dfe..435a8f8 100644
@@ -776,6 +776,17 @@ config TARGET_LS2080A_SIMU
 	  development platform that supports the QorIQ LS2080A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1088AQDS
+	bool "Support ls1088aqds"
+	select ARCH_LS1088A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	help
+	  Support for NXP LS1088AQDS platform
+	  The LS1088A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS1088A
+	  Layerscape Architecture processor.
+
 config TARGET_LS2080AQDS
 	bool "Support ls2080aqds"
 	select ARCH_LS2080A
arch/arm/cpu/armv8/Kconfig +1 -1
index 630bb78..b3565a5 100644
@@ -88,7 +88,7 @@ config PSCI_RESET
 	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && !TARGET_LS2080A_EMU && \
 		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
 		   !TARGET_LS2080ARDB && !TARGET_LS1012AQDS && \
-		   !TARGET_LS1088ARDB && \
+		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
arch/arm/cpu/armv8/fsl-layerscape/Kconfig +21 -0
index a418c91..bf48918 100644
@@ -229,6 +229,27 @@ config FSL_TZASC_1
 config FSL_TZASC_2
 	bool
 
+config SYS_FSL_ERRATUM_A008336
+	bool
+
+config SYS_FSL_ERRATUM_A009801
+	bool
+
+config SYS_FSL_ERRATUM_A009803
+	bool
+
+config SYS_FSL_ERRATUM_A009942
+	bool
+
+config SYS_FSL_ERRATUM_A010165
+	bool
+
+config SYS_FSL_ERRATUM_A008511
+	bool
+
+config SYS_FSL_ERRATUM_A008850
+	bool
+
 endmenu
 
 menu "Layerscape clock tree configuration"
arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c +2 -0
index 9f89bd0..9f5cdd5 100644
@@ -30,6 +30,7 @@ static struct serdes_config serdes1_cfg_tbl[] = {
 	{0x20, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 2, 2 } },
 	{0x35, {SGMII3, QSGMII_B, SGMII1, SGMII2 }, {3, 4, 3, 3 } },
 	{0x36, {QSGMII_A, QSGMII_B, SGMII1, SGMII2 }, {4, 4, 3, 3 } },
+	{0x3A, {SGMII3, PCIE1, SGMII1, SGMII2 }, {3, 5, 3, 3 } },
 		{}
 };
 static struct serdes_config serdes2_cfg_tbl[] = {
@@ -39,6 +40,7 @@ static struct serdes_config serdes2_cfg_tbl[] = {
 	{0x0E, {PCIE1, PCIE1, PCIE2, SATA1 }, {7, 7, 6, 9 }  },
 	{0x13, {PCIE1, PCIE1, PCIE3, PCIE3 }, {7, 7, 7, 7 }  },
 	{0x14, {PCIE1, PCIE2, PCIE3, PCIE3 }, {5, 5, 7, 7 }  },
+	{0x3C, {NONE, PCIE2, NONE, PCIE3 }, {0, 5, 0, 6 }  },
 	{}
 };
 
arch/arm/cpu/armv8/fsl-layerscape/soc.c +1 -0
index 337d99d..f5a22ba 100644
@@ -24,6 +24,7 @@
 #ifdef CONFIG_CHAIN_OF_TRUST
 #include <fsl_validate.h>
 #endif
+#include <fsl_immap.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
arch/arm/dts/Makefile +1 -0
index 5ac8ea3..2ec5c12 100644
@@ -164,6 +164,7 @@ dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
 	ls1021a-iot-duart.dtb
 dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
 	fsl-ls2080a-rdb.dtb \
+	fsl-ls1088a-qds.dtb \
 	fsl-ls1088a-rdb.dtb
 dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1043a-qds-lpuart.dtb \
arch/arm/dts/fsl-ls1088a-qds.dts new file +70 -0

70 lines not on this page · raw message

board/freescale/ls1088a/Kconfig +16 -0
index a4d8223..1ada661 100644
@@ -1,3 +1,19 @@
+if TARGET_LS1088AQDS
+
+config SYS_BOARD
+	default "ls1088a"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1088aqds"
+
+endif
+
 if TARGET_LS1088ARDB
 
 config SYS_BOARD
board/freescale/ls1088a/MAINTAINERS +8 -2
index 1abbf91..e1e6d4b 100644
@@ -5,5 +5,11 @@ S:	Maintained
 F:	board/freescale/ls1088a/
 F:	include/configs/ls1088ardb.h
 F:	configs/ls1088ardb_qspi_defconfig
-F:	configs/ls1088ardb_sdcard_defconfig
-F:	configs/ls1088ardb_sdcard_qspi_defconfig
+
+LS1088AQDS BOARD
+M:	Prabhakar Kushwaha <[email protected]>
+M:	Ashish Kumar <[email protected]>
+S:	Maintained
+F:	board/freescale/ls1088a/
+F:	include/configs/ls1088aqds.h
+F:	configs/ls1088aqds_qspi_defconfig
board/freescale/ls1088a/Makefile +1 -0
index e997cf1..bdcce9e 100644
@@ -6,4 +6,5 @@
 
 obj-y += ls1088a.o
 obj-$(CONFIG_TARGET_LS1088ARDB) += eth_ls1088ardb.o
+obj-$(CONFIG_TARGET_LS1088AQDS) += eth_ls1088aqds.o
 obj-y += ddr.o
board/freescale/ls1088a/ddr.c +7 -112

160 lines not on this page · raw message

board/freescale/ls1088a/ddr.h +7 -2
index 1658c22..bfc5dae 100644
@@ -33,9 +33,14 @@ static const struct board_specific_parameters udimm0[] = {
 	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
 	{2,  2300, 0, 4,     9, 0x0A0C0D11, 0x1214150E,},
 	{}
+#elif defined(CONFIG_TARGET_LS1088AQDS)
+	{2,  1666, 0, 8,     8, 0x0A0A0C0E, 0x0F10110C,},
+	{2,  1900, 0, 4,     7, 0x09090B0D, 0x0E10120B,},
+	{2,  2300, 0, 4,     9, 0x0A0C0D11, 0x1214150E,},
+	{}
 #else
-	{2,  2140, 0, 4,     4, 0x0, 0x0},
-	{1,  2140, 0, 4,     4, 0x0, 0x0},
+	{2,  2140, 0, 8,     4, 0x0, 0x0},
+	{1,  2140, 0, 8,     4, 0x0, 0x0},
 	{}
 #endif
 };
board/freescale/ls1088a/eth_ls1088aqds.c new file +650 -0

650 lines not on this page · raw message

board/freescale/ls1088a/ls1088a.c +85 -21

162 lines not on this page · raw message

board/freescale/ls1088a/ls1088a_qixis.h +5 -0
index 9757d1b..4790461 100644
@@ -31,4 +31,9 @@
 #define QIXIS_SDCLK1_165		0x2
 #define QIXIS_SDCLK1_100_SP		0x3
 
+#define BRDCFG4_EMISEL_MASK		0xE0
+#define BRDCFG4_EMISEL_SHIFT		5
+#define BRDCFG9_SFPTX_MASK		0x10
+#define BRDCFG9_SFPTX_SHIFT		4
+
 #endif
configs/ls1088aqds_qspi_defconfig new file +27 -0
new file mode 100644
index 0000000..3511d92
@@ -0,0 +1,27 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1088AQDS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_OF_CONTROL=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
configs/ls1088ardb_qspi_defconfig +0 -6
index 223d581..a0559a7 100644
@@ -9,19 +9,13 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
-CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
include/configs/ls1088a_common.h +5 -3
index 5f976b8..f882d6a 100644
@@ -33,9 +33,6 @@
 #define  CONFIG_SPI_FLASH_BAR
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-/* Flat Device Tree Definitions */
-/* #define CONFIG_OF_LIBFDT */
-
 #define CONFIG_FSL_DDR_INTERACTIVE	/* Interactive debugging */
 
 #define CONFIG_VERY_BIG_RAM
@@ -140,6 +137,11 @@ unsigned long long get_qixis_addr(void);
 
 /* Command line configuration */
 #define CONFIG_CMD_ENV
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
include/configs/ls1088aqds.h new file +403 -0

403 lines not on this page · raw message

Signature · 1 line
1.9.1