Patch "mtd: cfi_cmdset_0002: Change erase functions to retry for error" has been added to the 4.9-stable tree
[email protected]
AppliedThis is a note to let you know that I've just added the patch titled
mtd: cfi_cmdset_0002: Change erase functions to retry for error
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mtd-cfi_cmdset_0002-change-erase-functions-to-retry-for-error.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
45f75b8a919a4255f52df454f1ffdee0e42443b2Mon Sep 17 00:00:00 2001
From: Tokunori Ikegami <[email protected]>
Date: Wed, 30 May 2018 18:32:28 +0900
Subject: mtd: cfi_cmdset_0002: Change erase functions to retry for error
From: Tokunori Ikegami <[email protected]>
commit 45f75b8a919a4255f52df454f1ffdee0e42443b2 upstream.
For the word write functions it is retried for error. But it is not implemented to retry for the erase functions. To make sure for the erase functions change to retry as same.
This is needed to prevent the flash erase error caused only once. It was caused by the error case of chip_good() in the do_erase_oneblock(). Also it was confirmed on the MACRONIX flash device MX29GL512FHT2I-11G. But the error issue behavior is not able to reproduce at this moment. The flash controller is parallel Flash interface integrated on BCM53003.
--- drivers/mtd/chips/cfi_cmdset_0002.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/mtd/chips/cfi_cmdset_0002.c +10 -0
@@ -2237,6 +2237,7 @@ static int __xipram do_erase_chip(structunsigned long int adr;DECLARE_WAITQUEUE (wait, current);int ret =0 ; +int retry_cnt =0 ; adr = cfi->addr_unlock1;
@@ -2254,6 +2255,7 @@ static int __xipram do_erase_chip(structENABLE_VPP (map);xip_disable (map, chip, adr); + retry:cfi_send_gen_cmd (0xAA , cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type,NULL );cfi_send_gen_cmd (0x55 , cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type,NULL );cfi_send_gen_cmd (0x80 , cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type,NULL );
@@ -2308,6 +2310,9 @@ static int __xipram do_erase_chip(structmap_write ( map,CMD (0xF0 ), chip->start );/* FIXME - should have reset delay before continuing */ +if (++retry_cnt <=MAX_RETRIES ) + goto retry; + ret = -EIO ; }
@@ -2327,6 +2332,7 @@ static int __xipram do_erase_oneblock(stunsigned long timeo = jiffies +HZ ;DECLARE_WAITQUEUE (wait, current);int ret =0 ; +int retry_cnt =0 ; adr += chip->start;
@@ -2344,6 +2350,7 @@ static int __xipram do_erase_oneblock(stENABLE_VPP (map);xip_disable (map, chip, adr); + retry:cfi_send_gen_cmd (0xAA , cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type,NULL );cfi_send_gen_cmd (0x55 , cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type,NULL );cfi_send_gen_cmd (0x80 , cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type,NULL );
@@ -2401,6 +2408,9 @@ static int __xipram do_erase_oneblock(stmap_write ( map,CMD (0xF0 ), chip->start );/* FIXME - should have reset delay before continuing */ +if (++retry_cnt <=MAX_RETRIES ) + goto retry; + ret = -EIO ; }
Patches currently in stable-queue which might be from [email protected] are
queue-4.9/mtd-cfi_cmdset_0002-change-erase-functions-to-retry-for-error.patch queue-4.9/mtd-cfi_cmdset_0002-change-erase-functions-to-check-chip-good-only.patch queue-4.9/mtd-cfi_cmdset_0002-change-definition-naming-to-retry-write-operation.patch