issues loading a FIT image with bootm
Hi all,
I'm trying to load a FIT image (image.itb) with the bootm command, but I'm getting the following issue:
barebox@RaspberryPi 3 Model B:/ bootm
Loading open firmware Device Tree flattened Binary '/mnt/disk0.3/image.itb' no image handler found for image type open firmware Device Tree flattened Binary handler failed with: No such device
The generated .itb file is created with mkimage -f from u-boot and according to the patches, the FIT image format should be supported:
http://lists.infradead.org/pipermail/barebox/2015-March/022876.html
Does anyone have experience with loading and verifying FIT images with bootm and could give me some suggestions on what would I need to check further in order to identify and fix the issue?
Thanks,
Kai
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Hi Kai,
Quoted 7 lines · Kai Che
Hi all,
I'm trying to load a FIT image (image.itb) with the bootm command, but I'm getting the following issue:
barebox@RaspberryPi 3 Model B:/ bootm
Loading open firmware Device Tree flattened Binary '/mnt/disk0.3/image.itb' no image handler found for image type open firmware Device Tree flattened Binary
This sounds like you have CONFIG_FITIMAGE or CONFIG_BOOTM_FITIMAGE disabled.
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox