riscv: qemu: Enable PCI host ECAM generic driver
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
---
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
board/emulation/qemu-riscv/Kconfig +4 -0
@@ -36,5 +36,9 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply OF_BOARD_SETUP imply SIFIVE_SERIAL imply SMP + imply PCI + imply DM_PCI + imply PCIE_ECAM_GENERIC + imply CMD_PCI endif
Signature · 1 line
2.7.4
PATCH 2/2 riscv: qemu: Enable e1000 and nvme support
Since we have added the PCI support to the 'virt' target, enable e1000 and NVME as alternate network and storage devices for these virtio based devices.
---
board/emulation/qemu-riscv/Kconfig | 2 ++ 1 file changed, 2 insertions(+)
board/emulation/qemu-riscv/Kconfig +2 -0
@@ -40,5 +40,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply DM_PCI imply PCIE_ECAM_GENERIC imply CMD_PCI + imply E1000 + imply NVME endif
Signature · 1 line
2.7.4
Auer
PATCH 2/2 riscv: qemu: Enable e1000 and nvme support
Quoted 15 lines · Bin Meng
Since we have added the PCI support to the 'virt' target, enable e1000 and NVME as alternate network and storage devices for these virtio based devices.
Signed-off-by Bin Meng <[email protected]>---
board/emulation/qemu-riscv/Kconfig | 2 ++ 1 file changed, 2 insertions(+)board/emulation/qemu-riscv/Kconfig +0
-0
board/emulation/qemu-riscv/Kconfig config BOARD_SPECIFIC_OPTIONS # dummy · line 46
Quoted 7 lines
board/emulation/qemu-riscv/Kconfig +2
-0@@ -40,5 +40,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply DM_PCI imply PCIE_ECAM_GENERIC imply CMD_PCI + imply E1000 + imply NVME endif
Tested the series in QEMU master with an e1000 and a NVMe device, accessing them from U-Boot.
Auer
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
In reply to Bin MengQuoted 9 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Hi Rick,
Quoted 8 lines · Lukas
Quoted 6 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
Quoted 6 lines
Quoted 3 lines
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>
Could you please apply this series for v2019.07?
Regards,
Bin
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Hi BIn
Quoted 12 lines
Hi Rick,
Quoted 8 lines · Lukas
Quoted 6 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>Could you please apply this series for v2019.07?
OK
I will apply it today.
Thanks
Rick
Quoted 2 lines
Regards,
Bin
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Quoted 24 lines
Hi BIn
Quoted 21 lines
Hi Rick,
Quoted 8 lines · Lukas
Quoted 6 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
Quoted 6 lines
Quoted 3 lines
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Quoted 9 lines
OK
I will apply it today.Thanks
RickQuoted 2 lines
Regards,
Bin
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Hi Rick,
Quoted 20 lines · Rick Chen
Quoted 20 lines
Hi BIn
Quoted 16 lines
Hi Rick,
Quoted 12 lines · Lukas
Quoted 9 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&state=&q=riscv&archive=&delegate=
Could you please do some house keeping?
Regards,
Bin
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Hi Bin
Bin Meng <[email protected]> 於 2019年6月4日 週二 下午2:27寫道:
Quoted 30 lines
Hi Rick,
Quoted 26 lines · Rick Chen
Quoted 25 lines
Hi BIn
Quoted 21 lines
Hi Rick,
Quoted 8 lines · Lukas
Quoted 6 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
Quoted 6 lines
Quoted 3 lines
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>Could you please apply this series for v2019.07?
Quoted 7 lines
Quoted 1 line
Applied to u-boot-riscv/master, thanks!
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
Quoted 4 lines
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&state=&q=riscv&archive=&delegate=
Could you please do some house keeping?
I am not sure what do you mean about house keeping ?
Quoted 3 lines
Regards,
Bin
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Hi Rick,
Quoted 36 lines · Rick Chen
Hi Bin
Bin Meng <[email protected]> 於 2019年6月4日 週二 下午2:27寫道:
Quoted 32 lines
Hi Rick,
Quoted 27 lines · Rick Chen
Quoted 25 lines
Hi BIn
Quoted 21 lines
Hi Rick,
Quoted 8 lines · Lukas
Quoted 6 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
Quoted 6 lines
Quoted 3 lines
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Quoted 9 lines
Quoted 5 lines
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
Not sure if there will be conflicts, so simply not applied (skipped). You can try.
Quoted 6 lines
Quoted 4 lines
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&state=&q=riscv&archive=&delegate=
Could you please do some house keeping?
I am not sure what do you mean about house keeping ?
I meant that you should clean up all these patches in your queue. Either mark them as accepted, or superseded, etc.
Regards,
Bin
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Hi Bin
Bin Meng <[email protected]> 於 2019年6月5日 週三 下午5:29寫道:
Quoted 54 lines
Hi Rick,
Quoted 36 lines · Rick Chen
Hi Bin
Bin Meng <[email protected]> 於 2019年6月4日 週二 下午2:27寫道:
Quoted 32 lines
Hi Rick,
Quoted 27 lines · Rick Chen
Quoted 25 lines
Hi BIn
Quoted 21 lines
Hi Rick,
Quoted 8 lines · Lukas
Quoted 6 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
Quoted 6 lines
Quoted 3 lines
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Quoted 9 lines
Quoted 5 lines
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
Not sure if there will be conflicts, so simply not applied (skipped). You can try.
Quoted 1 line
Quoted 1 line
Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&state=&q=riscv&archive=&delegate=
Could you please do some house keeping?
I am not sure what do you mean about house keeping ?
I meant that you should clean up all these patches in your queue. Either mark them as accepted, or superseded, etc.
I just applied your patchs yesterday. And its state became Accepted.
https://patchwork.ozlabs.org/project/uboot/list/?order=delegate&state=*
I thought it will change by my actions automatically. How can I change state from New to Accepted ?
Thanks
Rick
Quoted 2 lines
Regards,
Bin
PATCH 1/2 riscv: qemu: Enable PCI host ECAM generic driver
Hi Rick,
Quoted 62 lines · Rick Chen
Hi Bin
Bin Meng <[email protected]> 於 2019年6月5日 週三 下午5:29寫道:
Quoted 58 lines
Hi Rick,
Quoted 36 lines · Rick Chen
Hi Bin
Bin Meng <[email protected]> 於 2019年6月4日 週二 下午2:27寫道:
Quoted 32 lines
Hi Rick,
Quoted 27 lines · Rick Chen
Quoted 25 lines
Hi BIn
Quoted 21 lines
Hi Rick,
Quoted 8 lines · Lukas
Quoted 6 lines · Bin Meng
QEMU 4.0.0 'virt' target integrates a generic ECAM PCI host. Enable the driver for it.
Signed-off-by Bin Meng <[email protected]>---
Quoted 6 lines
Quoted 3 lines
board/emulation/qemu-riscv/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)Reviewed-by Lukas Auer <[email protected]>Tested-by Lukas Auer <[email protected]>Could you please apply this series for v2019.07?
Applied to u-boot-riscv/master, thanks!
Quoted 9 lines
Quoted 5 lines
Thanks for applying.
By searching riscv patches from patchwork, it seems there are some old patches that are not cleaned up. I am not sure about their status. Maybe they are already applied.
I will rebase to u-boot/master before applying the patchs. If they are already applied, there will have conflictions, right ?
Not sure if there will be conflicts, so simply not applied (skipped). You can try.
Quoted 5 lines
Quoted 4 lines
http://patchwork.ozlabs.org/project/uboot/list/?series=&submitter=&state=&q=riscv&archive=&delegate=
Could you please do some house keeping?
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
I am not sure what do you mean about house keeping ?
I meant that you should clean up all these patches in your queue. Either mark them as accepted, or superseded, etc.
I just applied your patchs yesterday. And its state became Accepted.
I cleaned up my patches because I have the privilege to change patch status.
Quoted 3 lines
https://patchwork.ozlabs.org/project/uboot/list/?order=delegate&state=*
I thought it will change by my actions automatically.
No, it won't.
Quoted 2 lines
How can I change state from New to Accepted ?
You need change the state manually. I don't know other patches' status, so I left them to you. In the end, you are the RISC-V custodian.
Regards,
Bin