base: soc: Handle custom soc information sysfs entries
Subsystems (2)
PATCH 1/1 base: soc: Handle custom soc information sysfs entries
Soc framework exposed sysfs entries are not sufficient for some of the h/w platforms. Currently there is no interface where soc drivers can expose further information about their SoCs via soc framework. This change address this limitation where clients can pass their custom entries as attribute group and soc framework would expose them as sysfs properties.
---
Changes in v1:
- Remove NULL initialization of "soc_attr_groups"
- Taken care of freeing "soc_attr_groups" in soc_release()
- Addressed Stephen Boyd comments on usage of "kalloc"
drivers/base/soc.c | 23 +++++++++++++++-------- include/linux/sys_soc.h | 1 + 2 files changed, 16 insertions(+), 8 deletions(-)
drivers/base/soc.c +15 -8
@@ -104,15 +104,11 @@ static ssize_t soc_info_get(struct device *dev, .is_visible = soc_attribute_mode, }; -static const struct attribute_group *soc_attr_groups[] = { - &soc_attr_group, -NULL , -}; -static void soc_release (struct device *dev) { struct soc_device *soc_dev = container_of(dev, struct soc_device, dev); +kfree (soc_dev->dev.groups);kfree (soc_dev); }
@@ -121,6 +117,7 @@ static void soc_release(struct device *dev)struct soc_device *soc_device_register (struct soc_device_attribute *soc_dev_attr) {struct soc_device *soc_dev; +const struct attribute_group **soc_attr_groups;int ret;if (!soc_bus_type.p) {
@@ -136,10 +133,18 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr goto out1; } + soc_attr_groups =kcalloc (3 ,sizeof (*soc_attr_groups),GFP_KERNEL ); +if (!soc_attr_groups) { + ret = -ENOMEM ; + goto out2; + } + soc_attr_groups[0 ] = &soc_attr_group; + soc_attr_groups[1 ] = soc_dev_attr->custom_attr_group; +/* Fetch a unique (reclaimable) SOC ID. */ ret =ida_simple_get (&soc_ida,0 ,0 ,GFP_KERNEL );if (ret <0 ) - goto out2; + goto out3; soc_dev->soc_dev_num = ret; soc_dev->attr = soc_dev_attr;
@@ -151,14 +156,16 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr ret =device_register (&soc_dev->dev);if (ret) - goto out3; + goto out4;return soc_dev; -out3: +out4:ida_simple_remove (&soc_ida, soc_dev->soc_dev_num);put_device (&soc_dev->dev); soc_dev =NULL ; +out3: +kfree (soc_attr_groups); out2:kfree (soc_dev); out1:
include/linux/sys_soc.h +1 -0
@@ -15,6 +15,7 @@ struct soc_device_attribute {const char *serial_number;const char *soc_id;const void *data; +const struct attribute_group *custom_attr_group; };/**
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoting Murali Nalajala (2019-10-03 16:51:50)
Quoted 6 lines
drivers/base/soc.c +1
-1@@ -151,14 +156,16 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr ret =device_register (&soc_dev->dev);if (ret) - goto out3; + goto out4;
drivers/base/soc.c struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr · line 168
Quoted 10 lines
drivers/base/soc.c +3
-1return soc_dev; -out3: +out4:ida_simple_remove (&soc_ida, soc_dev->soc_dev_num);put_device (&soc_dev->dev); soc_dev =NULL ; +out3: +kfree (soc_attr_groups);
This code is tricky. put_device(&soc_dev->dev) will call soc_release() so we set soc_dev to NULL before calling kfree() on the error path. This way we don't doubly free a pointer that the release function will take care of. I wonder if the release function could free the ida as well, and then we could just make the device_register() failure path call put_device() and return ERR_PTR(ret) directly. Then the error path is simpler because we can avoid changing two pointers to NULL to avoid the double free twice. Or just inline the ida remove and put_device() call in the if and then goto out1 to consolidate the error pointer conversion.
Quoted 3 lines
drivers/base/soc.c +0
-0out2:kfree (soc_dev); out1:
Quoted 20 lines · Stephen Boyd
Quoting Murali Nalajala (2019-10-03 16:51:50)
Quoted 6 lines
drivers/base/soc.c +1
-1@@ -151,14 +156,16 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr ret =device_register (&soc_dev->dev);if (ret) - goto out3; + goto out4;drivers/base/soc.c struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr · line 168
Quoted 10 lines
drivers/base/soc.c +3
-1return soc_dev; -out3: +out4:ida_simple_remove (&soc_ida, soc_dev->soc_dev_num);put_device (&soc_dev->dev); soc_dev =NULL ; +out3: +kfree (soc_attr_groups);This code is tricky.
put_device(&soc_dev->dev)will callsoc_release()so we setsoc_devto NULL before callingkfree()on the error path. This
Quoted 9 lines
way we don't doubly free a pointer that the release function will take care of. I wonder if the release function could free the ida as well, and then we could just make the
device_register()failure path callput_device()and returnERR_PTR(ret)directly. Then the error path is simpler because we can avoid changing two pointers to NULL to avoid the double free twice. Or just inline the ida remove andput_device()call in the if and then goto out1 to consolidate the error pointer conversion.
But if we instead allocates the ida before the soc_dev, wouldn't the error path be something like?:
foo:
put_device(&soc_dev->dev); bar: ida_simple_remove(&soc_ida, soc_num); return err;
I think we still need two exit paths from soc_device_register() regardless of moving the ida_simple_remove() into the release, but we could drop it from the unregister(). So not sure if this is cleaner...
Regards,
Bjorn
Quoted 3 lines
Quoted 3 lines
drivers/base/soc.c +0
-0out2:kfree (soc_dev); out1:
Quoting Bjorn Andersson (2019-10-03 22:50:57)
Quoted 42 lines · Stephen Boyd
Quoted 21 lines
Quoting Murali Nalajala (2019-10-03 16:51:50)
Quoted 6 lines
drivers/base/soc.c +1
-1@@ -151,14 +156,16 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr ret =device_register (&soc_dev->dev);if (ret) - goto out3; + goto out4;drivers/base/soc.c struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr · line 168
Quoted 10 lines
drivers/base/soc.c +3
-1return soc_dev; -out3: +out4:ida_simple_remove (&soc_ida, soc_dev->soc_dev_num);put_device (&soc_dev->dev); soc_dev =NULL ; +out3: +kfree (soc_attr_groups);This code is tricky.
put_device(&soc_dev->dev)will callsoc_release()so we setsoc_devto NULL before callingkfree()on the error path. ThisQuoted 9 lines
way we don't doubly free a pointer that the release function will take care of. I wonder if the release function could free the ida as well, and then we could just make the
device_register()failure path callput_device()and returnERR_PTR(ret)directly. Then the error path is simpler because we can avoid changing two pointers to NULL to avoid the double free twice. Or just inline the ida remove andput_device()call in the if and then goto out1 to consolidate the error pointer conversion.But if we instead allocates the ida before the
soc_dev, wouldn't the error path be something like?:foo:
put_device(&soc_dev->dev); bar: ida_simple_remove(&soc_ida, soc_num); return err;
Quoted 4 lines
I think we still need two exit paths from
soc_device_register()regardless of moving theida_simple_remove()into the release, but we could drop it from theunregister(). So not sure if this is cleaner...
It doesn't seem "safe" to let the number be reused before the device is destroyed by put_device(). It would be clearer to do all the cleanup from the release function so that the soc_device_unregister() path isn't racy with another device being registered and reusing the same ID.
Of course this probably doesn't matter because the race I'm talking about is extremely unlikely given there's only ever one soc device. Reordering the put and remove would be fine too.
Greg KH
maintainerQuoted 48 lines · Stephen Boyd
Quoting Bjorn Andersson (2019-10-03 22:50:57)
Quoted 42 lines · Stephen Boyd
Quoted 21 lines
Quoting Murali Nalajala (2019-10-03 16:51:50)
Quoted 6 lines
drivers/base/soc.c +1
-1@@ -151,14 +156,16 @@ struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr ret =device_register (&soc_dev->dev);if (ret) - goto out3; + goto out4;drivers/base/soc.c struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr · line 168
Quoted 10 lines
drivers/base/soc.c +3
-1return soc_dev; -out3: +out4:ida_simple_remove (&soc_ida, soc_dev->soc_dev_num);put_device (&soc_dev->dev); soc_dev =NULL ; +out3: +kfree (soc_attr_groups);This code is tricky.
put_device(&soc_dev->dev)will callsoc_release()so we setsoc_devto NULL before callingkfree()on the error path. ThisQuoted 9 lines
way we don't doubly free a pointer that the release function will take care of. I wonder if the release function could free the ida as well, and then we could just make the
device_register()failure path callput_device()and returnERR_PTR(ret)directly. Then the error path is simpler because we can avoid changing two pointers to NULL to avoid the double free twice. Or just inline the ida remove andput_device()call in the if and then goto out1 to consolidate the error pointer conversion.But if we instead allocates the ida before the
soc_dev, wouldn't the error path be something like?:foo:
put_device(&soc_dev->dev); bar: ida_simple_remove(&soc_ida, soc_num); return err;Quoted 4 lines
I think we still need two exit paths from
soc_device_register()regardless of moving theida_simple_remove()into the release, but we could drop it from theunregister(). So not sure if this is cleaner...
Quoted 8 lines
It doesn't seem "safe" to let the number be reused before the device is destroyed by
put_device(). It would be clearer to do all the cleanup from the release function so that thesoc_device_unregister()path isn't racy with another device being registered and reusing the same ID.Of course this probably doesn't matter because the race I'm talking about is extremely unlikely given there's only ever one soc device. Reordering the put and remove would be fine too.
As the number is "owned" by the device, yes, it should just be removed in the release function that frees the device memory, making this all much simpler overall.
thanks,
greg k-h