Add GPU & Video Clock controller driver for SC7180
v2 cover Add GPU & Video Clock controller driver for SC7180
[v2]
* Split Fabia code cleanup and calibration code.
* Few cleanups for GPU/Video CC are
* header file inclusion, const for pll vco table.
* removal of always enabled clock from gpucc.
* compatibles added in sorted order.
* move from core_initcall to subsys_initcall().
* cleanup clk_parent_data for clocks to be provided from DT.
[v1]
* Fabia PLLs could fail latching in the case where the PLL is not calibrated, so add support to calibrate in prepare clock ops.
* Add driver support for Graphics clock controller for SC7180 and also update device tree bindings for the various clocks supported in the clock controller.
* Add driver support for Video clock controller for SC7180 and also update device tree bindings for the various clocks supported in the clock controller.
Taniya Das (8):
clk: qcom: alpha-pll: Remove useless read from set rate
clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration
dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
dt-bindings: clock: Introduce QCOM Graphics clock bindings
clk: qcom: Add graphics clock controller driver for SC7180
dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock
bindings
dt-bindings: clock: Introduce QCOM Video clock bindings
clk: qcom: Add video clock controller driver for SC7180
.../devicetree/bindings/clock/qcom,gpucc.txt | 24 -- .../devicetree/bindings/clock/qcom,gpucc.yaml | 70 ++++++ .../devicetree/bindings/clock/qcom,videocc.txt | 18 -- .../devicetree/bindings/clock/qcom,videocc.yaml | 62 +++++ drivers/clk/qcom/Kconfig | 16 ++ drivers/clk/qcom/Makefile | 2 + drivers/clk/qcom/clk-alpha-pll.c | 83 ++++++- drivers/clk/qcom/clk-alpha-pll.h | 4 + drivers/clk/qcom/gpucc-sc7180.c | 266 +++++++++++++++++++++ drivers/clk/qcom/videocc-sc7180.c | 259 ++++++++++++++++++++ include/dt-bindings/clock/qcom,gpucc-sc7180.h | 21 ++ include/dt-bindings/clock/qcom,videocc-sc7180.h | 23 ++ 12 files changed, 800 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc.txt create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc.yaml delete mode 100644 Documentation/devicetree/bindings/clock/qcom,videocc.txt create mode 100644 Documentation/devicetree/bindings/clock/qcom,videocc.yaml create mode 100644 drivers/clk/qcom/gpucc-sc7180.c create mode 100644 drivers/clk/qcom/videocc-sc7180.c create mode 100644 include/dt-bindings/clock/qcom,gpucc-sc7180.h create mode 100644 include/dt-bindings/clock/qcom,videocc-sc7180.h
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 1/8 clk: qcom: alpha-pll: Remove useless read from set rate
PLL_MODE read in fabia set rate is not required, thus remove the same.
--- drivers/clk/qcom/clk-alpha-pll.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/clk/qcom/clk-alpha-pll.c +1 -6
@@ -1141,14 +1141,9 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate) {struct clk_alpha_pll *pll =to_clk_alpha_pll (hw); -u32 val, l, alpha_width =pll_alpha_width (pll); +u32 l, alpha_width =pll_alpha_width (pll);u64 a;unsigned long rrate; -int ret =0 ; - - ret =regmap_read (pll->clkr.regmap,PLL_MODE (pll), &val); -if (ret) -return ret; rrate =alpha_pll_round_rate (rate, prate, &l, &a, alpha_width);
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 2/8 clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration
In reply to Taniya DasIn the cases where the PLL is not calibrated the PLL could fail to lock. Add support for prepare ops which would take care of the same.
Fabia PLL user/test control registers might required to be configured, so add support for configuring them.
--- drivers/clk/qcom/clk-alpha-pll.c | 76 ++++++++++++++++++++++++++++++++++++++++ drivers/clk/qcom/clk-alpha-pll.h | 4 +++ 2 files changed, 80 insertions(+)
drivers/clk/qcom/clk-alpha-pll.c +76 -0
@@ -1024,6 +1024,25 @@ void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,regmap_write (regmap,PLL_CONFIG_CTL (pll), config->config_ctl_val); +if (config->config_ctl_hi_val) +regmap_write (regmap,PLL_CONFIG_CTL_U (pll), + config->config_ctl_hi_val); + +if (config->user_ctl_val) +regmap_write (regmap,PLL_USER_CTL (pll), config->user_ctl_val); + +if (config->user_ctl_hi_val) +regmap_write (regmap,PLL_USER_CTL_U (pll), + config->user_ctl_hi_val); + +if (config->test_ctl_val) +regmap_write (regmap,PLL_TEST_CTL (pll), + config->test_ctl_val); + +if (config->test_ctl_hi_val) +regmap_write (regmap,PLL_TEST_CTL_U (pll), + config->test_ctl_hi_val); +if (config->post_div_mask) { mask = config->post_div_mask; val = config->post_div_val;
@@ -1162,7 +1181,64 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,return __clk_alpha_pll_update_latch (pll); } +static int alpha_pll_fabia_prepare (struct clk_hw *hw) +{ +struct clk_alpha_pll *pll =to_clk_alpha_pll (hw); +const struct pll_vco *vco; +struct clk_hw *parent_hw; +unsigned long cal_freq, rrate; +u32 cal_l, val, alpha_width =pll_alpha_width (pll); +u64 a; +int ret; + +/* Check if calibration needs to be done i.e. PLL is in reset */ + ret =regmap_read (pll->clkr.regmap,PLL_MODE (pll), &val); +if (ret) +return ret; + +/* Return early if calibration is not needed. */ +if (val &PLL_RESET_N ) +return 0 ; + + vco =alpha_pll_find_vco (pll,clk_hw_get_rate (hw)); +if (!vco) { +pr_err ("alpha pll: not in a valid vco range\n" ); +return -EINVAL ; + } + + cal_freq =DIV_ROUND_CLOSEST ((pll->vco_table[0 ].min_freq + + pll->vco_table[0 ].max_freq) *54 ,100 ); + + parent_hw =clk_hw_get_parent (hw); +if (!parent_hw) +return -EINVAL ; + + rrate =alpha_pll_round_rate (cal_freq,clk_hw_get_rate (parent_hw), + &cal_l, &a, alpha_width); +/* +* Due to a limited number of bits for fractional rate programming, the +* rounded up rate could be marginally higher than the requested rate. +*/ +if (rrate > (cal_freq +FABIA_PLL_RATE_MARGIN ) || rrate < cal_freq) +return -EINVAL ; + +/* Setup PLL for calibration frequency */ +regmap_write (pll->clkr.regmap,PLL_ALPHA_VAL (pll), cal_l); + +/* Bringup the PLL at calibration frequency */ + ret =clk_alpha_pll_enable (hw); +if (ret) { +pr_err ("alpha pll calibration failed\n" ); +return ret; + } + +clk_alpha_pll_disable (hw); + +return 0 ; +} +const struct clk_ops clk_alpha_pll_fabia_ops = { + .prepare = alpha_pll_fabia_prepare, .enable = alpha_pll_fabia_enable, .disable = alpha_pll_fabia_disable, .is_enabled = clk_alpha_pll_is_enabled,
drivers/clk/qcom/clk-alpha-pll.h +4 -0
@@ -94,6 +94,10 @@ struct alpha_pll_config {u32 alpha_hi;u32 config_ctl_val;u32 config_ctl_hi_val; +u32 user_ctl_val; +u32 user_ctl_hi_val; +u32 test_ctl_val; +u32 test_ctl_hi_val;u32 main_output_mask;u32 aux_output_mask;u32 aux2_output_mask;
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 3/8 dt-bindings: clock: Add YAML schemas for the QCOM GPUCC clock bindings
In reply to Taniya DasThe GPUCC clock provider have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those.
--- .../devicetree/bindings/clock/qcom,gpucc.txt | 24 -------- .../devicetree/bindings/clock/qcom,gpucc.yaml | 69 ++++++++++++++++++++++ 2 files changed, 69 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc.txt create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
Documentation/devicetree/bindings/clock/qcom,gpucc.txt deleted +0 -24
@@ -1,24 +0,0 @@ -Qualcomm Graphics Clock & Reset Controller Binding --------------------------------------------------- - -Required properties : -- compatible : shall contain "qcom,sdm845-gpucc" or "qcom,msm8998-gpucc" -- reg : shall contain base register location and length -- #clock-cells : from common clock binding, shall contain 1 -- #reset-cells : from common reset binding, shall contain 1 -- #power-domain-cells : from generic power domain binding, shall contain 1 -- clocks : shall contain the XO clock - shall contain the gpll0 out main clock (msm8998) -- clock-names : shall be "xo" - shall be "gpll0" (msm8998) - -Example: - gpucc: clock-controller@5090000 { - compatible = "qcom,sdm845-gpucc"; - reg = <0x5090000 0x9000>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - };
Documentation/devicetree/bindings/clock/qcom,gpucc.yaml new file +69 -0
69 lines not on this page · raw message
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 4/8 dt-bindings: clock: Introduce QCOM Graphics clock bindings
In reply to Taniya DasAdd device tree bindings for graphics clock controller for Qualcomm Technology Inc's SC7180 SoCs.
--- .../devicetree/bindings/clock/qcom,gpucc.yaml | 1 + include/dt-bindings/clock/qcom,gpucc-sc7180.h | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+) create mode 100644 include/dt-bindings/clock/qcom,gpucc-sc7180.h
Documentation/devicetree/bindings/clock/qcom,gpucc.yaml +1 -0
@@ -17,6 +17,7 @@ properties: compatible: enum: - qcom,msm8998-gpucc + - qcom,sc7180-gpucc - qcom,sdm845-gpucc clocks:
include/dt-bindings/clock/qcom,gpucc-sc7180.h new file +21 -0
@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (c) 2019, The Linux Foundation. All rights reserved. +*/ + +#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SC7180_H +#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SC7180_H + +#define GPU_CC_PLL1 0 +#define GPU_CC_AHB_CLK 1 +#define GPU_CC_CRC_AHB_CLK 2 +#define GPU_CC_CX_GMU_CLK 3 +#define GPU_CC_CX_SNOC_DVM_CLK 4 +#define GPU_CC_CXO_AON_CLK 5 +#define GPU_CC_CXO_CLK 6 +#define GPU_CC_GMU_CLK_SRC 7 + +/* CAM_CC GDSCRs */ +#define CX_GDSC 0 + +#endif
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 5/8 clk: qcom: Add graphics clock controller driver for SC7180
In reply to Taniya DasAdd support for the graphics clock controller found on SC7180 based devices. This would allow graphics drivers to probe and control their clocks.
--- drivers/clk/qcom/Kconfig | 8 ++ drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gpucc-sc7180.c | 266 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 275 insertions(+) create mode 100644 drivers/clk/qcom/gpucc-sc7180.c
drivers/clk/qcom/Kconfig +8 -0
@@ -245,6 +245,14 @@ config SC_GCC_7180 Say Y if you want to use peripheral devices such as UART, SPI, I2C, USB, UFS, SDCC, etc. +config SC_GPUCC_7180 + tristate "SC7180 Graphics Clock Controller" + select SC_GCC_7180 + help + Support for the graphics clock controller on SC7180 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + config SDM_CAMCC_845 tristate "SDM845 Camera Clock Controller" select SDM_GCC_845
drivers/clk/qcom/Makefile +1 -0
@@ -46,6 +46,7 @@ obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o +obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
drivers/clk/qcom/gpucc-sc7180.c new file +266 -0
266 lines not on this page · raw message
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 6/8 dt-bindings: clock: Add YAML schemas for the QCOM VIDEOCC clock bindings
In reply to Taniya DasThe VIDEOCC clock provider have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those.
--- .../devicetree/bindings/clock/qcom,videocc.txt | 18 ------- .../devicetree/bindings/clock/qcom,videocc.yaml | 61 ++++++++++++++++++++++ 2 files changed, 61 insertions(+), 18 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/qcom,videocc.txt create mode 100644 Documentation/devicetree/bindings/clock/qcom,videocc.yaml
Documentation/devicetree/bindings/clock/qcom,videocc.txt deleted +0 -18
@@ -1,18 +0,0 @@ -Qualcomm Video Clock & Reset Controller Binding ------------------------------------------------ - -Required properties : -- compatible : shall contain "qcom,sdm845-videocc" -- reg : shall contain base register location and length -- #clock-cells : from common clock binding, shall contain 1. -- #power-domain-cells : from generic power domain binding, shall contain 1. -- #reset-cells : from common reset binding, shall contain 1. - -Example: - videocc: clock-controller@ab00000 { - compatible = "qcom,sdm845-videocc"; - reg = <0xab00000 0x10000>; - #clock-cells = <1>; - #power-domain-cells = <1>; - #reset-cells = <1>; - };
Documentation/devicetree/bindings/clock/qcom,videocc.yaml new file +61 -0
61 lines not on this page · raw message
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 7/8 dt-bindings: clock: Introduce QCOM Video clock bindings
In reply to Taniya DasAdd device tree bindings for video clock controller for Qualcomm Technology Inc's SC7180 SoCs.
--- .../devicetree/bindings/clock/qcom,videocc.yaml | 1 + include/dt-bindings/clock/qcom,videocc-sc7180.h | 23 ++++++++++++++++++++++ 2 files changed, 24 insertions(+) create mode 100644 include/dt-bindings/clock/qcom,videocc-sc7180.h
Documentation/devicetree/bindings/clock/qcom,videocc.yaml +1 -0
@@ -16,6 +16,7 @@ description: | properties: compatible: enum: + - qcom,sc7180-videocc - qcom,sdm845-videocc clocks:
include/dt-bindings/clock/qcom,videocc-sc7180.h new file +23 -0
@@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* Copyright (c) 2019, The Linux Foundation. All rights reserved. +*/ + +#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SC7180_H +#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SC7180_H + +/* VIDEO_CC clocks */ +#define VIDEO_PLL0 0 +#define VIDEO_CC_VCODEC0_AXI_CLK 1 +#define VIDEO_CC_VCODEC0_CORE_CLK 2 +#define VIDEO_CC_VENUS_AHB_CLK 3 +#define VIDEO_CC_VENUS_CLK_SRC 4 +#define VIDEO_CC_VENUS_CTL_AXI_CLK 5 +#define VIDEO_CC_VENUS_CTL_CORE_CLK 6 +#define VIDEO_CC_XO_CLK 7 + +/* VIDEO_CC GDSCRs */ +#define VENUS_GDSC 0 +#define VCODEC0_GDSC 1 + +#endif
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.
PATCH v2 8/8 clk: qcom: Add video clock controller driver for SC7180
In reply to Taniya DasAdd support for the video clock controller found on SC7180 based devices. This would allow video drivers to probe and control their clocks.
--- drivers/clk/qcom/Kconfig | 8 ++ drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/videocc-sc7180.c | 259 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 268 insertions(+) create mode 100644 drivers/clk/qcom/videocc-sc7180.c
drivers/clk/qcom/Kconfig +8 -0
@@ -253,6 +253,14 @@ config SC_GPUCC_7180 Say Y if you want to support graphics controller devices and functionality such as 3D graphics. +config SC_VIDEOCC_7180 + tristate "SC7180 Video Clock Controller" + select SC_GCC_7180 + help + Support for the video clock controller on SC7180 devices. + Say Y if you want to support video devices and functionality such as + video encode and decode. + config SDM_CAMCC_845 tristate "SDM845 Camera Clock Controller" select SDM_GCC_845
drivers/clk/qcom/Makefile +1 -0
@@ -47,6 +47,7 @@ obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o +obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
drivers/clk/qcom/videocc-sc7180.c new file +259 -0
259 lines not on this page · raw message
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.