ARM: dts: aspeed: Fix SCU IRQ controller node addresses
Subsystems (2)
v2 cover ARM: dts: aspeed: Fix SCU IRQ controller node addresses
Warnings were introduced due to unit address on nodes that had no reg property. Add the reg properties for the nodes to fix the warnings.
Eddie James (2):
ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
arch/arm/boot/dts/aspeed-g5.dtsi | 1 + arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++-- 2 files changed, 5 insertions(+), 2 deletions(-)
Signature · 1 line
1.8.3.1
PATCH v2 1/2 ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
The node was defined with a unit address but had no reg property, resulting in a warning. Add a reg property for consistency to fix the warning.
--- arch/arm/boot/dts/aspeed-g5.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/aspeed-g5.dtsi +1 -0
@@ -225,6 +225,7 @@ scu_ic: interrupt-controller at 18 { #interrupt-cells = <1>; compatible = "aspeed,ast2500-scu-ic"; + reg = <0x18 0x4>; interrupts = <21>; interrupt-controller; };
Signature · 1 line
1.8.3.1
Re: [PATCH v2 1/2] ARM: dts: aspeed: ast2500: Fix SCU IRQ controller node
Quoted 5 lines · Eddie James
The node was defined with a unit address but had no reg property, resulting in a warning. Add a reg property for consistency to fix the warning.
Signed-off-by Eddie James <[email protected]>
Quoted 20 lines
--- arch/arm/boot/dts/aspeed-g5.dtsi | 1 + 1 file changed, 1 insertion(+)arch/arm/boot/dts/aspeed-g5.dtsi +1
-0@@ -225,6 +225,7 @@ scu_ic: interrupt-controller at 18 { #interrupt-cells = <1>; compatible = "aspeed,ast2500-scu-ic"; + reg = <0x18 0x4>; interrupts = <21>; interrupt-controller; };Signature · 1 line
1.8.3.1
PATCH v2 2/2 ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
In reply to Eddie JamesThe nodes were defined with a unit address but had no reg property, resulting in a warning. Add the reg properties for consistency to fix the warning.
--- arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
arch/arm/boot/dts/aspeed-g6.dtsi +4 -2
@@ -269,16 +269,18 @@ reg = <0x180 0x40>; }; - scu_ic0: interrupt-controller at 0 { + scu_ic0: interrupt-controller at 560 { #interrupt-cells = <1>; compatible = "aspeed,ast2600-scu-ic0"; + reg = <0x560 0x4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; }; - scu_ic1: interrupt-controller at 1 { + scu_ic1: interrupt-controller at 570 { #interrupt-cells = <1>; compatible = "aspeed,ast2600-scu-ic1"; + reg = <0x570 0x4>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; };
Signature · 1 line
1.8.3.1
Re: [PATCH v2 2/2] ARM: dts: aspeed: ast2600: Fix SCU IRQ controller nodes
Quoted 5 lines · Eddie James
The nodes were defined with a unit address but had no reg property, resulting in a warning. Add the reg properties for consistency to fix the warning.
Signed-off-by Eddie James <[email protected]>
Quoted 33 lines
--- arch/arm/boot/dts/aspeed-g6.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)arch/arm/boot/dts/aspeed-g6.dtsi +4
-2@@ -269,16 +269,18 @@ reg = <0x180 0x40>; }; - scu_ic0: interrupt-controller at 0 { + scu_ic0: interrupt-controller at 560 { #interrupt-cells = <1>; compatible = "aspeed,ast2600-scu-ic0"; + reg = <0x560 0x4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; }; - scu_ic1: interrupt-controller at 1 { + scu_ic1: interrupt-controller at 570 { #interrupt-cells = <1>; compatible = "aspeed,ast2600-scu-ic1"; + reg = <0x570 0x4>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; };Signature · 1 line
1.8.3.1