Skip to contentSkip to conversation

mmc: fsl_esdhc_imx: add wait_dat0() support

PATCH New haibo.chen at nxp.com 3 participants 3 messages Nov 5, 2020 – Dec 8, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 mmc: fsl_esdhc_imx: add wait_dat0() support

From: Haibo Chen <[email protected]>

Add wait_dat0() support, upper layer will use this callback.

---
 drivers/mmc/fsl_esdhc_imx.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
drivers/mmc/fsl_esdhc_imx.c +15 -0
index 22040c67a8..29592d1f2c 100644
@@ -1646,6 +1646,20 @@ static int fsl_esdhc_set_enhanced_strobe(struct udevice *dev)
 }
 #endif
 
+static int fsl_esdhc_wait_dat0(struct udevice *dev, int state,
+				int timeout_us)
+{
+	int ret;
+	u32 tmp;
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+
+	ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
+				!!(tmp & PRSSTAT_DAT0) == !!state,
+				timeout_us);
+	return ret;
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
@@ -1656,6 +1670,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 #if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
 	.set_enhanced_strobe = fsl_esdhc_set_enhanced_strobe,
 #endif
+	.wait_dat0 = fsl_esdhc_wait_dat0,
 };
 #endif
 
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/1 mmc: fsl_esdhc_imx: add wait_dat0() support

Dear Haibo,

Quoted 5 lines · haibo.chen at nxp.com

From: Haibo Chen <[email protected]>

Add wait_dat0() support, upper layer will use this callback.

Best Regards,
Jaehoon Chung

Quoted 38 lines
---
 drivers/mmc/fsl_esdhc_imx.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
drivers/mmc/fsl_esdhc_imx.c +15 -0
index 22040c67a8..29592d1f2c 100644
@@ -1646,6 +1646,20 @@ static int fsl_esdhc_set_enhanced_strobe(struct udevice *dev)
 }
 #endif
 
+static int fsl_esdhc_wait_dat0(struct udevice *dev, int state,
+				int timeout_us)
+{
+	int ret;
+	u32 tmp;
+	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
+	struct fsl_esdhc *regs = priv->esdhc_regs;
+
+	ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
+				!!(tmp & PRSSTAT_DAT0) == !!state,
+				timeout_us);
+	return ret;
+}
+
 static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
@@ -1656,6 +1670,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 #if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
 	.set_enhanced_strobe = fsl_esdhc_set_enhanced_strobe,
 #endif
+	.wait_dat0 = fsl_esdhc_wait_dat0,
 };
 #endif
 
#2 lore raw

PATCH v2 1/1 mmc: fsl_esdhc_imx: add wait_dat0() support

In reply to haibo.chen at nxp.com
Quoted 4 lines

From: Haibo Chen <[email protected]>
Add wait_dat0() support, upper layer will use this callback.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================