Skip to contentSkip to conversation

mtd: rawnand: qcom: Add helper to configure location register

PATCH In review Md Sadre Alam 2 participants 2 messages Feb 22, 2021 – Feb 23, 2021

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mtd: rawnand: qcom: Add helper to configure location register

This change will add helper nandc_set_read_loc() to configure location register value. QPIC V2 on wards there is separate location register to read the last code word. This helper will use to configure location register for last code word as well.

---
 drivers/mtd/nand/raw/qcom_nandc.c | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)
drivers/mtd/nand/raw/qcom_nandc.c +26 -12
index bfefb4e..82d083ad 100644
@@ -181,8 +181,8 @@
 #define	ECC_BCH_4BIT	BIT(2)
 #define	ECC_BCH_8BIT	BIT(3)
 
-#define nandc_set_read_loc(nandc, reg, cw_offset, read_size, is_last_read_loc)	\
-nandc_set_reg(nandc, NAND_READ_LOCATION_##reg,			\
+#define nandc_set_read_loc_first(nandc, reg, cw_offset, read_size, is_last_read_loc)	\
+nandc_set_reg(nandc, reg,			\
 	      ((cw_offset) << READ_LOCATION_OFFSET) |		\
 	      ((read_size) << READ_LOCATION_SIZE) |			\
 	      ((is_last_read_loc) << READ_LOCATION_LAST))
@@ -667,6 +667,20 @@ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
 	return cw == (ecc->steps - 1);
 }
 
+/* helper to configure location register values */
+static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
+			       int cw_offset, int read_size, int is_last_read_loc)
+{
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+	int reg_base = NAND_READ_LOCATION_0;
+
+	reg_base += reg * 4;
+
+	return nandc_set_read_loc_first(nandc, reg_base, cw_offset,
+			read_size, is_last_read_loc);
+}
+
 /* helper to configure address register values */
 static void set_address(struct qcom_nand_host *host, u16 column, int page)
 {
@@ -726,7 +740,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
 	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
 
 	if (read)
-		nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
+		nandc_set_read_loc(chip, 0, 0, 0, host->use_ecc ?
 				   host->cw_data : host->cw_size, 1);
 }
 
@@ -1221,7 +1235,7 @@ static int nandc_param(struct qcom_nand_host *host)
 		nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
 	}
 
-	nandc_set_read_loc(nandc, 0, 0, 512, 1);
+	nandc_set_read_loc(chip, 0, 0, 0, 512, 1);
 
 	if (!nandc->props->qpic_v2) {
 		write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
@@ -1649,16 +1663,16 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 
 	if (nandc->props->is_bam) {
-		nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
+		nandc_set_read_loc(chip, cw, 0, read_loc, data_size1, 0);
 		read_loc += data_size1;
 
-		nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
+		nandc_set_read_loc(chip, cw, 1, read_loc, oob_size1, 0);
 		read_loc += oob_size1;
 
-		nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
+		nandc_set_read_loc(chip, cw, 2, read_loc, data_size2, 0);
 		read_loc += data_size2;
 
-		nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
+		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
 	}
 
 	config_nand_cw_read(chip, false);
@@ -1889,13 +1903,13 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 
 		if (nandc->props->is_bam) {
 			if (data_buf && oob_buf) {
-				nandc_set_read_loc(nandc, 0, 0, data_size, 0);
-				nandc_set_read_loc(nandc, 1, data_size,
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 0);
+				nandc_set_read_loc(chip, i, 1, data_size,
 						   oob_size, 1);
 			} else if (data_buf) {
-				nandc_set_read_loc(nandc, 0, 0, data_size, 1);
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 1);
 			} else {
-				nandc_set_read_loc(nandc, 0, data_size,
+				nandc_set_read_loc(chip, i, 0, data_size,
 						   oob_size, 1);
 			}
 		}
Signature · 6 lines
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
maintainer
#1 lore raw

Hello,

Md Sadre Alam <[email protected]> wrote on Mon, 22 Feb 2021 20:35:43 +0530:

Quoted 6 lines

This change will add helper nandc_set_read_loc() to configure location register value. QPIC V2 on wards there is separate location register to read the last code word. This helper will use to configure location register for last code word as well.

"
Create a nandc_set_read_loc() helper to abstract the configuration of the location register.

QPIC v2 onwards features a separate location register for the last codeword, so introducing this extra helper will simplify the addition of QPIC v2 support.
"

Quoted 10 lines
---
 drivers/mtd/nand/raw/qcom_nandc.c | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)
drivers/mtd/nand/raw/qcom_nandc.c +0 -0
index bfefb4e..82d083ad 100644

drivers/mtd/nand/raw/qcom_nandc.c line 184

Quoted 6 lines
drivers/mtd/nand/raw/qcom_nandc.c +1 -2
@@ -181,8 +181,8 @@
 #define	ECC_BCH_4BIT	BIT(2)
 #define	ECC_BCH_8BIT	BIT(3)
 
-#define nandc_set_read_loc(nandc, reg, cw_offset, read_size, is_last_read_loc)	\
-nandc_set_reg(nandc, NAND_READ_LOCATION_##reg,			\
+#define nandc_set_read_loc_first(nandc, reg, cw_offset, read_size, is_last_read_loc)	\

Please do the s/nandc/chip/ renaming in patch 1.

Quoted 72 lines
drivers/mtd/nand/raw/qcom_nandc.c +23 -8
+nandc_set_reg(nandc, reg,			\
 	      ((cw_offset) << READ_LOCATION_OFFSET) |		\
 	      ((read_size) << READ_LOCATION_SIZE) |			\
 	      ((is_last_read_loc) << READ_LOCATION_LAST))
@@ -667,6 +667,20 @@ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
 	return cw == (ecc->steps - 1);
 }
 
+/* helper to configure location register values */
+static void nandc_set_read_loc(struct nand_chip *chip, int cw, int reg,
+			       int cw_offset, int read_size, int is_last_read_loc)
+{
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+
+	int reg_base = NAND_READ_LOCATION_0;
+
+	reg_base += reg * 4;
+
+	return nandc_set_read_loc_first(nandc, reg_base, cw_offset,
+			read_size, is_last_read_loc);
+}
+
 /* helper to configure address register values */
 static void set_address(struct qcom_nand_host *host, u16 column, int page)
 {
@@ -726,7 +740,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
 	nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
 
 	if (read)
-		nandc_set_read_loc(nandc, 0, 0, host->use_ecc ?
+		nandc_set_read_loc(chip, 0, 0, 0, host->use_ecc ?
 				   host->cw_data : host->cw_size, 1);
 }
 
@@ -1221,7 +1235,7 @@ static int nandc_param(struct qcom_nand_host *host)
 		nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld);
 	}
 
-	nandc_set_read_loc(nandc, 0, 0, 512, 1);
+	nandc_set_read_loc(chip, 0, 0, 0, 512, 1);
 
 	if (!nandc->props->qpic_v2) {
 		write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0);
@@ -1649,16 +1663,16 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 
 	if (nandc->props->is_bam) {
-		nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0);
+		nandc_set_read_loc(chip, cw, 0, read_loc, data_size1, 0);
 		read_loc += data_size1;
 
-		nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0);
+		nandc_set_read_loc(chip, cw, 1, read_loc, oob_size1, 0);
 		read_loc += oob_size1;
 
-		nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0);
+		nandc_set_read_loc(chip, cw, 2, read_loc, data_size2, 0);
 		read_loc += data_size2;
 
-		nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
+		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
 	}
 
 	config_nand_cw_read(chip, false);
@@ -1889,13 +1903,13 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 
 		if (nandc->props->is_bam) {
 			if (data_buf && oob_buf) {
-				nandc_set_read_loc(nandc, 0, 0, data_size, 0);
-				nandc_set_read_loc(nandc, 1, data_size,
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 0);
+				nandc_set_read_loc(chip, i, 1, data_size,

drivers/mtd/nand/raw/qcom_nandc.c static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, · line 1915

Quoted 10 lines
drivers/mtd/nand/raw/qcom_nandc.c +2 -2
 						   oob_size, 1);
 			} else if (data_buf) {
-				nandc_set_read_loc(nandc, 0, 0, data_size, 1);
+				nandc_set_read_loc(chip, i, 0, 0, data_size, 1);
 			} else {
-				nandc_set_read_loc(nandc, 0, data_size,
+				nandc_set_read_loc(chip, i, 0, data_size,
 						   oob_size, 1);
 			}
 		}

Thanks,
Miquèl