mtd: rawnand: qcom: Add helper to configure location register
PATCH 1/1 mtd: rawnand: qcom: Add helper to configure location register
This change will add helper nandc_set_read_loc() to configure location register value. QPIC V2 on wards there is separate location register to read the last code word. This helper will use to configure location register for last code word as well.
--- drivers/mtd/nand/raw/qcom_nandc.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-)
drivers/mtd/nand/raw/qcom_nandc.c +26 -12
@@ -181,8 +181,8 @@#define ECC_BCH_4BIT BIT(2)#define ECC_BCH_8BIT BIT(3) -#define nandc_set_read_loc (nandc, reg, cw_offset, read_size, is_last_read_loc) \ -nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \ +#define nandc_set_read_loc_first (nandc, reg, cw_offset, read_size, is_last_read_loc) \ +nandc_set_reg(nandc, reg, \ ((cw_offset) << READ_LOCATION_OFFSET) | \ ((read_size) << READ_LOCATION_SIZE) | \ ((is_last_read_loc) << READ_LOCATION_LAST))
@@ -667,6 +667,20 @@ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)return cw == (ecc->steps -1 ); } +/* helper to configure location register values */ +static void nandc_set_read_loc (struct nand_chip *chip,int cw,int reg, +int cw_offset,int read_size,int is_last_read_loc) +{ +struct qcom_nand_controller *nandc =get_qcom_nand_controller (chip); + +int reg_base =NAND_READ_LOCATION_0 ; + + reg_base += reg *4 ; + +return nandc_set_read_loc_first (nandc, reg_base, cw_offset, + read_size, is_last_read_loc); +} +/* helper to configure address register values */ static void set_address (struct qcom_nand_host *host,u16 column,int page) {
@@ -726,7 +740,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)nandc_set_reg (nandc,NAND_EXEC_CMD ,1 );if (read) -nandc_set_read_loc (nandc,0 ,0 , host->use_ecc ? +nandc_set_read_loc (chip,0 ,0 ,0 , host->use_ecc ? host->cw_data : host->cw_size,1 ); }
@@ -1221,7 +1235,7 @@ static int nandc_param(struct qcom_nand_host *host)nandc_set_reg (nandc,NAND_DEV_CMD_VLD_RESTORE , nandc->vld); } -nandc_set_read_loc (nandc,0 ,0 ,512 ,1 ); +nandc_set_read_loc (chip,0 ,0 ,0 ,512 ,1 );if (!nandc->props->qpic_v2) {write_reg_dma (nandc,NAND_DEV_CMD_VLD ,1 ,0 );
@@ -1649,16 +1663,16 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip, }if (nandc->props->is_bam) { -nandc_set_read_loc (nandc,0 , read_loc, data_size1,0 ); +nandc_set_read_loc (chip, cw,0 , read_loc, data_size1,0 ); read_loc += data_size1; -nandc_set_read_loc (nandc,1 , read_loc, oob_size1,0 ); +nandc_set_read_loc (chip, cw,1 , read_loc, oob_size1,0 ); read_loc += oob_size1; -nandc_set_read_loc (nandc,2 , read_loc, data_size2,0 ); +nandc_set_read_loc (chip, cw,2 , read_loc, data_size2,0 ); read_loc += data_size2; -nandc_set_read_loc (nandc,3 , read_loc, oob_size2,1 ); +nandc_set_read_loc (chip, cw,3 , read_loc, oob_size2,1 ); }config_nand_cw_read (chip, false);
@@ -1889,13 +1903,13 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,if (nandc->props->is_bam) {if (data_buf && oob_buf) { -nandc_set_read_loc (nandc,0 ,0 , data_size,0 ); -nandc_set_read_loc (nandc,1 , data_size, +nandc_set_read_loc (chip, i,0 ,0 , data_size,0 ); +nandc_set_read_loc (chip, i,1 , data_size, oob_size,1 ); }else if (data_buf) { -nandc_set_read_loc (nandc,0 ,0 , data_size,1 ); +nandc_set_read_loc (chip, i,0 ,0 , data_size,1 ); }else { -nandc_set_read_loc (nandc,0 , data_size, +nandc_set_read_loc (chip, i,0 , data_size, oob_size,1 ); } }
Signature · 6 lines
2.7.4 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
Miquel Raynal
maintainerHello,
Md Sadre Alam <[email protected]> wrote on Mon, 22 Feb 2021 20:35:43 +0530:
Quoted 6 lines
This change will add helper
nandc_set_read_loc()to configure location register value. QPIC V2 on wards there is separate location register to read the last code word. This helper will use to configure location register for last code word as well.
"
Create a nandc_set_read_loc() helper to abstract the configuration of the location register.
QPIC v2 onwards features a separate location register for the last codeword, so introducing this extra helper will simplify the addition of QPIC v2 support.
"
Quoted 10 lines
Signed-off-by Md Sadre Alam <[email protected]>--- drivers/mtd/nand/raw/qcom_nandc.c | 38 ++++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-)drivers/mtd/nand/raw/qcom_nandc.c +0
-0
drivers/mtd/nand/raw/qcom_nandc.c line 184
Quoted 6 lines
drivers/mtd/nand/raw/qcom_nandc.c +1
-2@@ -181,8 +181,8 @@#define ECC_BCH_4BIT BIT(2)#define ECC_BCH_8BIT BIT(3) -#define nandc_set_read_loc (nandc, reg, cw_offset, read_size, is_last_read_loc) \ -nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \ +#define nandc_set_read_loc_first (nandc, reg, cw_offset, read_size, is_last_read_loc) \
Please do the s/nandc/chip/ renaming in patch 1.
Quoted 72 lines
drivers/mtd/nand/raw/qcom_nandc.c +23
-8+nandc_set_reg (nandc, reg, \ ((cw_offset) <<READ_LOCATION_OFFSET ) | \ ((read_size) <<READ_LOCATION_SIZE ) | \ ((is_last_read_loc) <<READ_LOCATION_LAST ))@@ -667,6 +667,20 @@ static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)return cw == (ecc->steps -1 ); } +/* helper to configure location register values */ +static void nandc_set_read_loc (struct nand_chip *chip,int cw,int reg, +int cw_offset,int read_size,int is_last_read_loc) +{ +struct qcom_nand_controller *nandc =get_qcom_nand_controller (chip); + +int reg_base =NAND_READ_LOCATION_0 ; + + reg_base += reg *4 ; + +return nandc_set_read_loc_first (nandc, reg_base, cw_offset, + read_size, is_last_read_loc); +} +/* helper to configure address register values */ static void set_address (struct qcom_nand_host *host,u16 column,int page) {@@ -726,7 +740,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)nandc_set_reg (nandc,NAND_EXEC_CMD ,1 );if (read) -nandc_set_read_loc (nandc,0 ,0 , host->use_ecc ? +nandc_set_read_loc (chip,0 ,0 ,0 , host->use_ecc ? host->cw_data : host->cw_size,1 ); }@@ -1221,7 +1235,7 @@ static int nandc_param(struct qcom_nand_host *host)nandc_set_reg (nandc,NAND_DEV_CMD_VLD_RESTORE , nandc->vld); } -nandc_set_read_loc (nandc,0 ,0 ,512 ,1 ); +nandc_set_read_loc (chip,0 ,0 ,0 ,512 ,1 );if (!nandc->props->qpic_v2) {write_reg_dma (nandc,NAND_DEV_CMD_VLD ,1 ,0 );@@ -1649,16 +1663,16 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip, }if (nandc->props->is_bam) { -nandc_set_read_loc (nandc,0 , read_loc, data_size1,0 ); +nandc_set_read_loc (chip, cw,0 , read_loc, data_size1,0 ); read_loc += data_size1; -nandc_set_read_loc (nandc,1 , read_loc, oob_size1,0 ); +nandc_set_read_loc (chip, cw,1 , read_loc, oob_size1,0 ); read_loc += oob_size1; -nandc_set_read_loc (nandc,2 , read_loc, data_size2,0 ); +nandc_set_read_loc (chip, cw,2 , read_loc, data_size2,0 ); read_loc += data_size2; -nandc_set_read_loc (nandc,3 , read_loc, oob_size2,1 ); +nandc_set_read_loc (chip, cw,3 , read_loc, oob_size2,1 ); }config_nand_cw_read (chip, false);@@ -1889,13 +1903,13 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,if (nandc->props->is_bam) {if (data_buf && oob_buf) { -nandc_set_read_loc (nandc,0 ,0 , data_size,0 ); - nandc_set_read_loc(nandc, 1, data_size, +nandc_set_read_loc (chip, i,0 ,0 , data_size,0 ); + nandc_set_read_loc(chip, i, 1, data_size,
drivers/mtd/nand/raw/qcom_nandc.c static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, · line 1915
Quoted 10 lines
drivers/mtd/nand/raw/qcom_nandc.c +2
-2oob_size, 1); }else if (data_buf) { -nandc_set_read_loc (nandc,0 ,0 , data_size,1 ); +nandc_set_read_loc (chip, i,0 ,0 , data_size,1 ); }else { -nandc_set_read_loc (nandc,0 , data_size, +nandc_set_read_loc (chip, i,0 , data_size, oob_size,1 ); } }
Thanks,
Miquèl