drm/msm/dp: signal audio plugged change at dp_pm_resume
PATCH 1/1 drm/msm/dp: signal audio plugged change at dp_pm_resume
There is a scenario that dp cable is unplugged from DUT during system suspended will cause audio option state does not match real connection state. Fix this problem by Signaling audio plugged change with realtime connection status at dp_pm_resume() so that audio option will be in correct state after system resumed.
--- drivers/gpu/drm/msm/dp/dp_display.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/msm/dp/dp_display.c +4 -0
@@ -1339,6 +1339,10 @@ static int dp_pm_resume(struct device *dev)else dp->dp_display.is_connected = false; +dp_display_handle_plugged_change (g_dp_display, + dp->dp_display.is_connected); + +mutex_unlock (&dp->event_mutex);return 0 ;
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoting Kuogee Hsieh (2021-07-22 15:15:17)
Quoted 7 lines
There is a scenario that dp cable is unplugged from DUT during system suspended will cause audio option state does not match real connection state. Fix this problem by Signaling audio plugged change with realtime connection status at
dp_pm_resume()so that audio option will be in correct state after system resumed.Fixes bd52cfedb5a8 ("drm/msm/dp: power off DP phy at suspend")
This should be
Quoted 2 lines
Signed-off-by Kuogee Hsieh <[email protected]>---