Skip to contentSkip to conversation

Bluetooth: btusb: Improve stability for QCA devices

PATCH Superseded Zijun Hu 2 participants 2 messages Feb 11, 2022

Subsystems (2)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Zijun Hu

author
#0 lore raw

PATCH 1/1 Bluetooth: btusb: Improve stability for QCA devices

From: Zijun Hu <[email protected]>

Controller will reset after NVM is downloaded for QCA device, so wait a moment for reset Done then go ahead to improve stability.

---
 drivers/bluetooth/btusb.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/bluetooth/btusb.c +5 -0
index e03dfbd92fcc..0ec2f17fe1d3 100644
@@ -2994,6 +2994,7 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
 #define QCA_PATCH_UPDATED	0x80
 #define QCA_DFU_TIMEOUT		3000
 #define QCA_FLAG_MULTI_NVM      0x80
+#define QCA_BT_RESET_WAIT_MS    100
 
 #define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
 #define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
@@ -3320,6 +3321,10 @@ static int btusb_setup_qca(struct hci_dev *hdev)
 		err = btusb_setup_qca_load_nvm(hdev, &ver, info);
 		if (err < 0)
 			return err;
+		/* Controller will reset after NVM is downloaded, so wait a moment
+		 * for reset Done, it will prevent controller from potential crash.
+		 */
+		msleep(QCA_BT_RESET_WAIT_MS);
 	}
 
 	return 0;
Signature · 1 line
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=613386

---Test result---

Test Summary:

CheckPatch                    PASS      1.57 seconds
GitLint                       PASS      1.01 seconds
SubjectPrefix                 PASS      0.88 seconds
BuildKernel                   PASS      30.36 seconds
BuildKernel32                 PASS      26.71 seconds
Incremental Build with patchesPASS      36.33 seconds
TestRunner: Setup             PASS      470.65 seconds
TestRunner: l2cap-tester      PASS      13.51 seconds
TestRunner: bnep-tester       PASS      6.11 seconds
TestRunner: mgmt-tester       PASS      104.12 seconds
TestRunner: rfcomm-tester     PASS      7.75 seconds
TestRunner: sco-tester        PASS      7.73 seconds
TestRunner: smp-tester        PASS      7.61 seconds
TestRunner: userchan-tester   PASS      6.49 seconds

---
Regards,
Linux Bluetooth