Bluetooth: btusb: Improve stability for QCA devices
Subsystems (2)
PATCH v3 1/1 Bluetooth: btusb: Improve stability for QCA devices
From: Zijun Hu <[email protected]>
Controller will reset after NVM is downloaded for QCA device, so wait a moment for reset Done then go ahead to improve stability.
Signed-off-by Zijun Hu <[email protected]>
--- drivers/bluetooth/btusb.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/bluetooth/btusb.c +8 -0
@@ -2994,6 +2994,7 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,#define QCA_PATCH_UPDATED 0x80#define QCA_DFU_TIMEOUT 3000#define QCA_FLAG_MULTI_NVM 0x80 +#define QCA_BT_RESET_WAIT_MS 100#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
@@ -3320,6 +3321,13 @@ static int btusb_setup_qca(struct hci_dev *hdev) err =btusb_setup_qca_load_nvm (hdev, &ver, info);if (err <0 )return err; + +/* WCN6855 2.1 will reset to apply firmware downloaded here, so +* wait ~100ms for reset Done then go ahead, otherwise, it maybe +* cause potential enable failure. +*/ +if (info->rom_version ==0x00130201 ) +msleep (QCA_BT_RESET_WAIT_MS ); }return 0 ;
Signature · 1 line
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=614062
---Test result---
Test Summary:
CheckPatch PASS 1.59 seconds GitLint PASS 0.95 seconds SubjectPrefix PASS 0.88 seconds BuildKernel PASS 29.75 seconds BuildKernel32 PASS 26.48 seconds Incremental Build with patchesPASS 35.93 seconds TestRunner: Setup PASS 473.13 seconds TestRunner: l2cap-tester PASS 13.72 seconds TestRunner: bnep-tester PASS 6.25 seconds TestRunner: mgmt-tester PASS 105.25 seconds TestRunner: rfcomm-tester PASS 7.81 seconds TestRunner: sco-tester PASS 7.84 seconds TestRunner: smp-tester PASS 7.71 seconds TestRunner: userchan-tester PASS 6.41 seconds
---
Regards,
Linux Bluetooth