README.skeleton: add readme to meta-skeleton layer
A message that is not in the archive (sent off-list or not yet received): [email protected]
I didn't see that this patch was picked up (but maybe I'm looking in the wrong place) and I received the email from Stephen that the issue should be moved to 3.4 M2.
Did I send this to the wrong mailing list or is it not the solution you're looking for?
I elaborated in bugzilla on why I think just adding the readme file to close this issue is enough but you may not have seen that comment or agree. :)
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13612
Scott
Quoted 32 lines · Scott Weaver via lists.openembedded.org
Added to satisfy the yocto-check-layer tool readme file test.
[YOCTO #13612]
Signed-off-by Scott Weaver <[email protected]>--- meta-skeleton/README.skeleton | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 meta-skeleton/README.skeletonmeta-skeleton/README.skeleton new file +6
-0@@ -0,0 +1,7 @@ +meta-skeleton +============= + +The meta-skeleton layer contains example recipes and configuration files. + +This layer is not intended to demonstrate a Yocto Project Compatiblesoftware layer.
+Disable the signature check when testing this layer using the yocto-check-layer tool.
--
2.25.1
Quoted 22 lines · Scott Weaver
I didn't see that this patch was picked up (but maybe I'm looking in the wrong place) and I received the email from Stephen that the issue should be moved to 3.4 M2.
Did I send this to the wrong mailing list or is it not the solution you're looking for?I elaborated in bugzilla on why I think just adding the readme file to close this issue is enough but you may not have seen that comment or agree. :)
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13612Scott
Quoted 10 lines · Scott Weaver via lists.openembedded.org
Added to satisfy the yocto-check-layer tool readme file test.
[YOCTO #13612]
Signed-off-by Scott Weaver <[email protected]>---
meta-skeleton/README.skeleton | 7 +++++++1 file changed, 7 insertions(+)create mode 100644 meta-skeleton/README.skeleton
Quoted 13 lines
meta-skeleton/README.skeleton line 7
Quoted 13 lines
meta-skeleton/README.skeleton new file +7
-0@@ -0,0 +1,7 @@ +meta-skeleton +============= + +The meta-skeleton layer contains example recipes and configuration files. + +This layer is not intended to demonstrate a Yocto Project Compatible software layer. +Disable the signature check when testing this layer using the yocto-check-layer tool.
Sorry, it takes time to page in the context for this.
I think we should fix meta-skeleton to work with yocto-check-layer. I think this may be relatively simple, we can change the busybox bbappend that is causing the signature failure to be 'distro' specific, e.g. something like:
-SRC_URI += " \
+SRC_URI_append_mydistro = " \
and then an example is still there but it doesn't break the checks (and isn't enabled by default). We could add a comment about it being enabled by a custom distro called 'mydistro'.
That change, along with your README addition should allow the layer tests to pass.
Cheers,
Richard
Thanks, Richard.
The issue noted that the distro specific update wasn't working but it's because they tried SRC_URI_append_poky (which correctly failed) so I didn't even think to try anything else.
My mistake. I'll make the changes you suggested.
Thanks again for your time!
Scott
Quoted 70 lines · Richard Purdie
Quoted 1 line · Scott Weaver
I didn't see that this patch was picked up (but maybe I'm looking in the
wrong place) and I received the email
Quoted 2 lines
from Stephen that the issue should be moved to 3.4 M2. Did I send this to the wrong mailing list or is it not the solution
you're looking for?
Quoted 2 lines
I elaborated in bugzilla on why I think just adding the readme file to
close this issue is enough but you may
Quoted 11 lines
not have seen that comment or agree. :)
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13612Scott
Quoted 4 lines · Scott Weaver via lists.openembedded.org
Added to satisfy the yocto-check-layer tool readme file test.
[YOCTO #13612]
Quoted 7 lines
Review
Quoted 7 lines
Signed-off-by Scott Weaver <[email protected]>--- meta-skeleton/README.skeleton | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 meta-skeleton/README.skeleton(quoted diff) +0
-0b/meta-skeleton/README.skeleton
Quoted 9 lines
meta-skeleton/README.skeleton line 4
Quoted 9 lines
new file mode 100644
index 0000000000..25468dc87ameta-skeleton/README.skeleton new file +4
-0@@ -0,0 +1,7 @@ +meta-skeleton +============= + +The meta-skeleton layer contains example recipes and configurationfiles.
Quoted 2 lines
meta-skeleton/README.skeleton line 6
Quoted 2 lines
meta-skeleton/README.skeleton new file +2
-0+ +This layer is not intended to demonstrate a Yocto Project Compatiblesoftware layer.
Quoted 1 line
meta-skeleton/README.skeleton line 7
Quoted 1 line
meta-skeleton/README.skeleton new file +1
-0+Disable the signature check when testing this layer using theyocto-check-layer tool.
Sorry, it takes time to page in the context for this.
I think we should fix meta-skeleton to work with yocto-check-layer. I think this
may be relatively simple, we can change the busybox bbappend that is causing the
signature failure to be 'distro' specific, e.g. something like:(quoted diff) +1
-1-SRC_URI += " \ +SRC_URI_append_mydistro = " \and then an example is still there but it doesn't break the checks (and isn't
enabled by default). We could add a comment about it being enabled by a custom
distro called 'mydistro'.That change, along with your README addition should allow the layer tests to pass.
Cheers,
Richard