cve-update-nvd2-native: Use maximum CVSS score from all sources
A message that is not in the archive (sent off-list or not yet received): [email protected]
Gentle reminder.
________________________________
From: [email protected] <[email protected]> on behalf of Het Patel via lists.openembedded.org <[email protected]>
Sent: Thursday, January 22, 2026 8:29 PM
To: [email protected] <[email protected]>
Cc: xe-linux-external(mailer list) <[email protected]>
Subject: [OE-core] [PATCH v3] cve-update-nvd2-native: Use maximum CVSS score from all sources
From: Het Patel <[email protected]>
The CVE check system was incorrectly reporting lower CVSS scores when multiple scoring sources were available in the NVD database. This occurred because the code only extracted the first element from the metrics arrays, which could be a "Secondary" source with a lower score rather than the "Primary" source or the highest available vendor score.
According to the CVSS v4.0 User Guide, "In situations where multiple CVSS-B scores are applicable but only one is provided, the highest CVSS-B score must be utilized." This follows the "reasonable worst-case" principle established by the CVSS SIG.
This fix iterates through all available sources (v2, v3.0, v3.1, and v4.0) and selects the maximum CVSS score to ensure the highest severity is reported.
Fixes [YOCTO #15931]
References:
- https://www.first.org/cvss/v4.0/user-guide
- https://www.first.org/cvss/v3.1/user-guide
- https://www.first.org/cvss/v2/minutes/cvss-meeting-minutes-06202006.pdf
--- .../meta/cve-update-nvd2-native.bb | 55 +++++++++++++------ 1 file changed, 39 insertions(+), 16 deletions(-)
meta/recipes-core/meta/cve-update-nvd2-native.bb +39 -16
@@ -350,32 +350,55 @@ def update_db(conn, elt): if desc['lang'] == 'en': cveDesc = desc['value'] date = elt['cve']['lastModified'] + + # Extract maximum CVSS scores from all sources (Primary and Secondary) + cvssv2 = 0.0 try: - accessVector = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['accessVector'] - vectorString = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['vectorString'] - cvssv2 = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['baseScore'] + # Iterate through all cvssMetricV2 entries and find the maximum score + for metric in elt['cve']['metrics']['cvssMetricV2']: + score = metric['cvssData']['baseScore'] + if score > cvssv2: + cvssv2 = score + accessVector = metric['cvssData']['accessVector'] + vectorString = metric['cvssData']['vectorString'] except KeyError: - cvssv2 = 0.0 - cvssv3 = None + pass + + cvssv3 = 0.0 try: - accessVector = accessVector or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['attackVector'] - vectorString = vectorString or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['vectorString'] - cvssv3 = elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['baseScore'] + # Iterate through all cvssMetricV30 entries and find the maximum score + for metric in elt['cve']['metrics']['cvssMetricV30']: + score = metric['cvssData']['baseScore'] + if score > cvssv3: + cvssv3 = score + accessVector = accessVector or metric['cvssData']['attackVector'] + vectorString = vectorString or metric['cvssData']['vectorString'] except KeyError: pass + try: - accessVector = accessVector or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['attackVector'] - vectorString = vectorString or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['vectorString'] - cvssv3 = cvssv3 or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['baseScore'] + # Iterate through all cvssMetricV31 entries and find the maximum score + for metric in elt['cve']['metrics']['cvssMetricV31']: + score = metric['cvssData']['baseScore'] + if score > cvssv3: + cvssv3 = score + accessVector = accessVector or metric['cvssData']['attackVector'] + vectorString = vectorString or metric['cvssData']['vectorString'] except KeyError: pass - cvssv3 = cvssv3 or 0.0 + + cvssv4 = 0.0 try: - accessVector = accessVector or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['attackVector'] - vectorString = vectorString or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['vectorString'] - cvssv4 = elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['baseScore'] + # Iterate through all cvssMetricV40 entries and find the maximum score + for metric in elt['cve']['metrics']['cvssMetricV40']: + score = metric['cvssData']['baseScore'] + if score > cvssv4: + cvssv4 = score + accessVector = accessVector or metric['cvssData']['attackVector'] + vectorString = vectorString or metric['cvssData']['vectorString'] except KeyError: - cvssv4 = 0.0 + pass + accessVector = accessVector or "UNKNOWN" vectorString = vectorString or "UNKNOWN"
Quoted 2 lines · Het Patel via lists.openembedded.org
Gentle reminder.
Hello,
Your patch was not forgotten: It is in master-next:
https://git.openembedded.org/openembedded-core/log/?h=master-next
That means that it has passed testing and now needs to be reviewed by the review team.
Please note that there are higher priority subjects right now, as stated in the weekly report: https://wiki.yoctoproject.org/wiki/Weekly_Status.
You can ping again if your patch has not been reviewed or merged in two weeks.
Regards,
Quoted 151 lines
------------------------------
*From:* [email protected] < [email protected]> on behalf of Het Patel via lists.openembedded.org <[email protected]> *Sent:* Thursday, January 22, 2026 8:29 PM
*To:* [email protected] < [email protected]>
*Cc:* xe-linux-external(mailer list) <[email protected]> *Subject:* [OE-core] [PATCH v3] cve-update-nvd2-native: Use maximum CVSS score from all sourcesFrom: Het Patel <[email protected]>
The CVE check system was incorrectly reporting lower CVSS scores when multiple scoring sources were available in the NVD database. This occurred because the code only extracted the first element from the metrics arrays, which could be a "Secondary" source with a lower score rather than the "Primary" source or the highest available vendor score.
According to the CVSS v4.0 User Guide, "In situations where multiple CVSS-B scores are applicable but only one is provided, the highest CVSS-B score must be utilized." This follows the "reasonable worst-case" principle established by the CVSS SIG.
This fix iterates through all available sources (v2, v3.0, v3.1, and v4.0) and selects the maximum CVSS score to ensure the highest severity is reported.
Fixes [YOCTO #15931]
References:
- https://www.first.org/cvss/v4.0/user-guide
- https://www.first.org/cvss/v3.1/user-guide
- https://www.first.org/cvss/v2/minutes/cvss-meeting-minutes-06202006.pdfSigned-off-by Het Patel <[email protected]>--- .../meta/cve-update-nvd2-native.bb | 55 +++++++++++++------ 1 file changed, 39 insertions(+), 16 deletions(-)meta/recipes-core/meta/cve-update-nvd2-native.bb +3
-1@@ -350,32 +350,55 @@ def update_db(conn, elt): if desc['lang'] == 'en': cveDesc = desc['value'] date = elt['cve']['lastModified'] + + # Extract maximum CVSS scores from all sources (Primary and Secondary) + cvssv2 = 0.0 try: - accessVector =elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['accessVector']
- vectorString =
elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['vectorString']
- cvssv2 =
elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV2 entries and find the maximum
scoremeta/recipes-core/meta/cve-update-nvd2-native.bb +9
-3+ for metric in elt['cve']['metrics']['cvssMetricV2']: + score = metric['cvssData']['baseScore'] + if score > cvssv2: + cvssv2 = score + accessVector = metric['cvssData']['accessVector'] + vectorString = metric['cvssData']['vectorString'] except KeyError: - cvssv2 = 0.0 - cvssv3 = None + pass + + cvssv3 = 0.0 try: - accessVector = accessVector orelt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['vectorString']
- cvssv3 =
elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV30 entries and find the maximum
scoremeta/recipes-core/meta/cve-update-nvd2-native.bb +5
-0+ for metric in elt['cve']['metrics']['cvssMetricV30']: + score = metric['cvssData']['baseScore'] + if score > cvssv3: + cvssv3 = score + accessVector = accessVector ormetric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:
passmeta/recipes-core/meta/cve-update-nvd2-native.bb +1
-1+ try: - accessVector = accessVector orelt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['vectorString']
- cvssv3 = cvssv3 or
elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV31 entries and find the maximum
scoremeta/recipes-core/meta/cve-update-nvd2-native.bb +5
-0+ for metric in elt['cve']['metrics']['cvssMetricV31']: + score = metric['cvssData']['baseScore'] + if score > cvssv3: + cvssv3 = score + accessVector = accessVector ormetric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:
passmeta/recipes-core/meta/cve-update-nvd2-native.bb +2
-2- cvssv3 = cvssv3 or 0.0 + + cvssv4 = 0.0 try: - accessVector = accessVector orelt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['vectorString']
- cvssv4 =
elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV40 entries and find the maximum
scoremeta/recipes-core/meta/cve-update-nvd2-native.bb +5
-0+ for metric in elt['cve']['metrics']['cvssMetricV40']: + score = metric['cvssData']['baseScore'] + if score > cvssv4: + cvssv4 = score + accessVector = accessVector ormetric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:meta/recipes-core/meta/cve-update-nvd2-native.bb +2
-2- cvssv4 = 0.0 + pass + accessVector = accessVector or "UNKNOWN" vectorString = vectorString or "UNKNOWN" -=-=-=-=-=-=-=-=-=-=-=-Links: You receive all messages sent to this group. View/Reply Online (#230078):
https://lists.openembedded.org/g/openembedded-core/message/230078
Mute This Topic: https://lists.openembedded.org/mt/117400902/4316185
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Signature · 2 lines
Yoann Congal Smile ECS