Skip to contentSkip to conversation

cve-update-nvd2-native: Use maximum CVSS score from all sources

PATCH Het Patel -X (hetpat - E INFOCHIPS PRIVATE LIMITED at Cisco) 2 participants 2 messages Jan 28 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

Gentle reminder.
________________________________
From: [email protected] <[email protected]> on behalf of Het Patel via lists.openembedded.org <[email protected]>
Sent: Thursday, January 22, 2026 8:29 PM
To: [email protected] <[email protected]>
Cc: xe-linux-external(mailer list) <[email protected]>
Subject: [OE-core] [PATCH v3] cve-update-nvd2-native: Use maximum CVSS score from all sources

From: Het Patel <[email protected]>

The CVE check system was incorrectly reporting lower CVSS scores when multiple scoring sources were available in the NVD database. This occurred because the code only extracted the first element from the metrics arrays, which could be a "Secondary" source with a lower score rather than the "Primary" source or the highest available vendor score.

According to the CVSS v4.0 User Guide, "In situations where multiple CVSS-B scores are applicable but only one is provided, the highest CVSS-B score must be utilized." This follows the "reasonable worst-case" principle established by the CVSS SIG.

This fix iterates through all available sources (v2, v3.0, v3.1, and v4.0) and selects the maximum CVSS score to ensure the highest severity is reported.

Fixes [YOCTO #15931]

References:
- https://www.first.org/cvss/v4.0/user-guide
- https://www.first.org/cvss/v3.1/user-guide
- https://www.first.org/cvss/v2/minutes/cvss-meeting-minutes-06202006.pdf

---
 .../meta/cve-update-nvd2-native.bb            | 55 +++++++++++++------
 1 file changed, 39 insertions(+), 16 deletions(-)
meta/recipes-core/meta/cve-update-nvd2-native.bb +39 -16
index 8c8148dd92..41c34ba0d0 100644
@@ -350,32 +350,55 @@ def update_db(conn, elt):
         if desc['lang'] == 'en':
             cveDesc = desc['value']
     date = elt['cve']['lastModified']
+
+    # Extract maximum CVSS scores from all sources (Primary and Secondary)
+    cvssv2 = 0.0
     try:
-        accessVector = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['accessVector']
-        vectorString = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['vectorString']
-        cvssv2 = elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV2 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV2']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv2:
+                cvssv2 = score
+                accessVector = metric['cvssData']['accessVector']
+                vectorString = metric['cvssData']['vectorString']
     except KeyError:
-        cvssv2 = 0.0
-    cvssv3 = None
+        pass
+
+    cvssv3 = 0.0
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['vectorString']
-        cvssv3 = elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV30 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV30']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
         pass
+
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['vectorString']
-        cvssv3 = cvssv3 or elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV31 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV31']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
         pass
-    cvssv3 = cvssv3 or 0.0
+
+    cvssv4 = 0.0
     try:
-        accessVector = accessVector or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['attackVector']
-        vectorString = vectorString or elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['vectorString']
-        cvssv4 = elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['baseScore']
+        # Iterate through all cvssMetricV40 entries and find the maximum score
+        for metric in elt['cve']['metrics']['cvssMetricV40']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv4:
+                cvssv4 = score
+                accessVector = accessVector or metric['cvssData']['attackVector']
+                vectorString = vectorString or metric['cvssData']['vectorString']
     except KeyError:
-        cvssv4 = 0.0
+        pass
+
     accessVector = accessVector or "UNKNOWN"
     vectorString = vectorString or "UNKNOWN"
 
#2 lore raw
Quoted 2 lines · Het Patel via lists.openembedded.org

Gentle reminder.

Hello,

Your patch was not forgotten: It is in master-next:
https://git.openembedded.org/openembedded-core/log/?h=master-next
That means that it has passed testing and now needs to be reviewed by the review team.
Please note that there are higher priority subjects right now, as stated in the weekly report: https://wiki.yoctoproject.org/wiki/Weekly_Status.

You can ping again if your patch has not been reviewed or merged in two weeks.

Regards,

Quoted 151 lines

------------------------------
*From:* [email protected] < [email protected]> on behalf of Het Patel via lists.openembedded.org <[email protected]> *Sent:* Thursday, January 22, 2026 8:29 PM
*To:* [email protected] < [email protected]>
*Cc:* xe-linux-external(mailer list) <[email protected]> *Subject:* [OE-core] [PATCH v3] cve-update-nvd2-native: Use maximum CVSS score from all sources

From: Het Patel <[email protected]>

The CVE check system was incorrectly reporting lower CVSS scores when multiple scoring sources were available in the NVD database. This occurred because the code only extracted the first element from the metrics arrays, which could be a "Secondary" source with a lower score rather than the "Primary" source or the highest available vendor score.

According to the CVSS v4.0 User Guide, "In situations where multiple CVSS-B scores are applicable but only one is provided, the highest CVSS-B score must be utilized." This follows the "reasonable worst-case" principle established by the CVSS SIG.

This fix iterates through all available sources (v2, v3.0, v3.1, and v4.0) and selects the maximum CVSS score to ensure the highest severity is reported.

Fixes [YOCTO #15931]

References:
- https://www.first.org/cvss/v4.0/user-guide
- https://www.first.org/cvss/v3.1/user-guide
- https://www.first.org/cvss/v2/minutes/cvss-meeting-minutes-06202006.pdf

---
 .../meta/cve-update-nvd2-native.bb            | 55 +++++++++++++------
 1 file changed, 39 insertions(+), 16 deletions(-)
meta/recipes-core/meta/cve-update-nvd2-native.bb +3 -1
index 8c8148dd92..41c34ba0d0 100644
@@ -350,32 +350,55 @@ def update_db(conn, elt):
         if desc['lang'] == 'en':
             cveDesc = desc['value']
     date = elt['cve']['lastModified']
+
+    # Extract maximum CVSS scores from all sources (Primary and Secondary)
+    cvssv2 = 0.0
     try:
-        accessVector =

elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['accessVector']
- vectorString =
elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['vectorString']
- cvssv2 =
elt['cve']['metrics']['cvssMetricV2'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV2 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +9 -3
+        for metric in elt['cve']['metrics']['cvssMetricV2']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv2:
+                cvssv2 = score
+                accessVector = metric['cvssData']['accessVector']
+                vectorString = metric['cvssData']['vectorString']
     except KeyError:
-        cvssv2 = 0.0
-    cvssv3 = None
+        pass
+
+    cvssv3 = 0.0
     try:
-        accessVector = accessVector or

elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['vectorString']
- cvssv3 =
elt['cve']['metrics']['cvssMetricV30'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV30 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +5 -0
+        for metric in elt['cve']['metrics']['cvssMetricV30']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or

metric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:
pass

meta/recipes-core/meta/cve-update-nvd2-native.bb +1 -1
+
     try:
-        accessVector = accessVector or

elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['vectorString']
- cvssv3 = cvssv3 or
elt['cve']['metrics']['cvssMetricV31'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV31 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +5 -0
+        for metric in elt['cve']['metrics']['cvssMetricV31']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv3:
+                cvssv3 = score
+                accessVector = accessVector or

metric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:
pass

meta/recipes-core/meta/cve-update-nvd2-native.bb +2 -2
-    cvssv3 = cvssv3 or 0.0
+
+    cvssv4 = 0.0
     try:
-        accessVector = accessVector or

elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['attackVector']
- vectorString = vectorString or
elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['vectorString']
- cvssv4 =
elt['cve']['metrics']['cvssMetricV40'][0]['cvssData']['baseScore']
+ # Iterate through all cvssMetricV40 entries and find the maximum
score

meta/recipes-core/meta/cve-update-nvd2-native.bb +5 -0
+        for metric in elt['cve']['metrics']['cvssMetricV40']:
+            score = metric['cvssData']['baseScore']
+            if score > cvssv4:
+                cvssv4 = score
+                accessVector = accessVector or

metric['cvssData']['attackVector']
+ vectorString = vectorString or
metric['cvssData']['vectorString']
except KeyError:

meta/recipes-core/meta/cve-update-nvd2-native.bb +2 -2
-        cvssv4 = 0.0
+        pass
+
     accessVector = accessVector or "UNKNOWN"
     vectorString = vectorString or "UNKNOWN"
 
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group. View/Reply Online (#230078):
https://lists.openembedded.org/g/openembedded-core/message/230078
Mute This Topic: https://lists.openembedded.org/mt/117400902/4316185
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Signature · 2 lines
Yoann Congal
Smile ECS