Skip to contentSkip to conversation

smtp/pop and NAT only

DISCUSSION [email protected] 1 participant 1 message May 18, 2005

lore
Share & tools
lore
#0 lore raw

----- Original Message -----
From: Rob Sterenborg <[email protected]>
Date: Wednesday, May 18, 2005 3:54 pm
Subject: RE: smtp/pop and NAT only

Quoted 6 lines
Quoted 4 lines

Hello,
My server is on FC3 (fedora3)
eth0 is WAN ---> DSL router ----> ISP
eth1 is LAN

Not sure I understand the ASCII art : is your server the DSL router ?

The server has two ethernet card. eth0 is basically WAN.

Quoted 6 lines
Quoted 4 lines

I would like to that 2 client 192.168.0.253 and 192.168.0.248 are connected to " fedora3 server "
via NAT.

So that they can do "anything" ?

Yes that is correct.

Quoted 10 lines
Quoted 5 lines

And all other clients connected to "fedora3 server" are able to only send / recieve mail.

Howto do that

Something like :

$IPT -P FORWARD DROP

Quoted 8 lines

$IPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -s 192.168.0.248 -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -s 192.168.0.253 -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -p tcp --dport 25 -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -p tcp --dport 110 -j ACCEPT

$IPT -t nat -A POSTROUTING -o eth0 -s 192.168.0.0/24 -j SNAT \
--to-source <inet_ip>

No static IP

Quoted 7 lines

Maybe Oscars IPTables tutorial is something useful :
http://iptables-tutorial.frozentux.net/iptables-tutorial.html

Gr,
Rob

Thanks a lot

I shall give it a try.

Varun

Quoted 3 lines