smtp/pop and NAT only
----- Original Message -----
From: Rob Sterenborg <[email protected]>
Date: Wednesday, May 18, 2005 3:54 pm
Subject: RE: smtp/pop and NAT only
Quoted 6 lines
Quoted 4 lines
Hello,
My server is on FC3 (fedora3)
eth0 is WAN ---> DSL router ----> ISP
eth1 is LANNot sure I understand the ASCII art : is your server the DSL router ?
The server has two ethernet card. eth0 is basically WAN.
Quoted 6 lines
Quoted 4 lines
I would like to that 2 client 192.168.0.253 and 192.168.0.248 are connected to " fedora3 server "
via NAT.So that they can do "anything" ?
Yes that is correct.
Quoted 10 lines
Quoted 5 lines
And all other clients connected to "fedora3 server" are able to only send / recieve mail.
Howto do that
Something like :
$IPT -P FORWARD DROP
Quoted 8 lines
$IPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -s 192.168.0.248 -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -s 192.168.0.253 -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -p tcp --dport 25 -j ACCEPT $IPT -A FORWARD -i eth1 -o eth0 -p tcp --dport 110 -j ACCEPT
$IPT -t nat -A POSTROUTING -o eth0 -s 192.168.0.0/24 -j SNAT \
--to-source <inet_ip>
No static IP
Quoted 7 lines
Maybe Oscars IPTables tutorial is something useful :
http://iptables-tutorial.frozentux.net/iptables-tutorial.htmlGr,
Rob
Thanks a lot
I shall give it a try.
Varun