Skip to contentSkip to conversation

2.4.17-rc1 doesn't boot (on K6-II)

DISCUSSION Sven Vermeulen 3 participants 5 messages Dec 14, 2001 – Dec 18, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

When booting 2.4.17-rc1, the following text appears:

-------------------------------------------- BEGIN -- Loading 2.4.17-rc1.............
Uncompressing Linux...

ran out of input data

-- System halted
--------------------------------------------- END ---

This has never occured to me before. I'm compiling -rc1 now on another box (with a different gcc - mine is 2.96-85 - yes, RedHat packaged it) to make sure this isn't due to gcc.

Sven Vermeulen

Signature · 3 lines
I would rather spend 10 hours reading someone else's source code than
10 minutes listening to Musak waiting for technical support which 
isn't. ~(Wettstein)
#1 lore raw

Resolved (was Re: 2.4.17-rc1 doesn't boot (on K6-II))

Quoted 1 line · Sven Vermeulen

When booting 2.4.17-rc1, the following text appears:

[...]

A kernel compiled with a different gcc went very well. I found it strange that the gcc I previously used (which I always use for compiling) gave that error, so I recompiled it with that compiler and rebooted... which went alright.

I can only guess what has mishappened. My /boot was full, but I hardly think this was the problem.

Oh well, it goes well now, no need to complain, do I? ;-)

Sven Vermeulen

Signature · 2 lines
panic("Foooooooood fight!"); 
  ~(In the kernel source aha1542.c, after detecting a bad segment list.)
#2 lore raw

Re: Resolved (was Re: 2.4.17-rc1 doesn't boot (on K6-II))

Quoted 4 lines · Sven Vermeulen

A kernel compiled with a different gcc went very well. I found it strange that the gcc I previously used (which I always use for compiling) gave that error, so I recompiled it with that compiler and rebooted... which went alright.

so now which version of gcc worked and which failed exactly?

Signature · 4 lines
Phil Sorber
AIM: PSUdaemon
IRC: irc.openprojects.net #psulug,#slackware,#splack PSUdaemon
GnuPG: keyserver - pgp.mit.edu
#3 lore raw

Re: Resolved (was Re: 2.4.17-rc1 doesn't boot (on K6-II))

Quoted 1 line · Phil Sorber

so now which version of gcc worked and which failed exactly?

Both (3.0.1 and 2.96-85, the RedHat-one) worked, that's just whats weird about it (to me).

Sven Vermeulen

Signature · 3 lines
 I thought I saw a pussycat...
 I did! I did! I did saw a pussycat!
 			(Tweety)
#4 lore raw
In reply to Sven Vermeulen
Quoted 9 lines · Sven Vermeulen

When booting 2.4.17-rc1, the following text appears:
-------------------------------------------- BEGIN -- Loading 2.4.17-rc1.............
Uncompressing Linux...

ran out of input data

-- System halted
--------------------------------------------- END ---

Check your installed kernel image, it may be truncated. This just happened to me using kernel-image .deb: only part of the kernel image got unpacked.

-m-