2.4.17-rc1 doesn't boot (on K6-II)
Hi,
When booting 2.4.17-rc1, the following text appears:
-------------------------------------------- BEGIN -- Loading 2.4.17-rc1.............
Uncompressing Linux...
ran out of input data
-- System halted
--------------------------------------------- END ---
This has never occured to me before. I'm compiling -rc1 now on another box (with a different gcc - mine is 2.96-85 - yes, RedHat packaged it) to make sure this isn't due to gcc.
Sven Vermeulen
Signature · 3 lines
I would rather spend 10 hours reading someone else's source code than 10 minutes listening to Musak waiting for technical support which isn't. ~(Wettstein)
Resolved (was Re: 2.4.17-rc1 doesn't boot (on K6-II))
Quoted 1 line · Sven Vermeulen
When booting 2.4.17-rc1, the following text appears:
[...]
A kernel compiled with a different gcc went very well. I found it strange that the gcc I previously used (which I always use for compiling) gave that error, so I recompiled it with that compiler and rebooted... which went alright.
I can only guess what has mishappened. My /boot was full, but I hardly think this was the problem.
Oh well, it goes well now, no need to complain, do I? ;-)
Sven Vermeulen
Signature · 2 lines
panic("Foooooooood fight!");
~(In the kernel source aha1542.c, after detecting a bad segment list.)Re: Resolved (was Re: 2.4.17-rc1 doesn't boot (on K6-II))
Quoted 4 lines · Sven Vermeulen
A kernel compiled with a different gcc went very well. I found it strange that the gcc I previously used (which I always use for compiling) gave that error, so I recompiled it with that compiler and rebooted... which went alright.
so now which version of gcc worked and which failed exactly?
Signature · 4 lines
Phil Sorber AIM: PSUdaemon IRC: irc.openprojects.net #psulug,#slackware,#splack PSUdaemon GnuPG: keyserver - pgp.mit.edu
Re: Resolved (was Re: 2.4.17-rc1 doesn't boot (on K6-II))
Quoted 1 line · Phil Sorber
so now which version of gcc worked and which failed exactly?
Both (3.0.1 and 2.96-85, the RedHat-one) worked, that's just whats weird about it (to me).
Sven Vermeulen
Signature · 3 lines
I thought I saw a pussycat... I did! I did! I did saw a pussycat! (Tweety)
Quoted 9 lines · Sven Vermeulen
When booting 2.4.17-rc1, the following text appears:
-------------------------------------------- BEGIN -- Loading 2.4.17-rc1.............
Uncompressing Linux...ran out of input data
-- System halted
--------------------------------------------- END ---
Check your installed kernel image, it may be truncated. This just happened to me using kernel-image .deb: only part of the kernel image got unpacked.
-m-