Skip to contentSkip to conversation

SRAM and MTD

DISCUSSION Felix Frey 2 participants 2 messages Aug 29, 2003 – Sep 2, 2003 Memory technology devices (MTD)

lore
Share & tools
lore

Felix Frey

author
#0 lore raw

Hi

I'd like to connect a 32kx8 static RAM (battery buffered) to the ISAbus of my x86 based system to frequently store sensitive data which _must_ survive a powerfail. Access should be made through the mtd character device. By diving a bit into the code I saw there is a ram chip driver, however, I got pretty confused.
Do I have to write my own mapping driver or how can I tell the chip driver where it finds my RAM device and how large it is ?
Does the ram chip driver accept any parameters ?

Any help is greatly appreciated.

Felix

#1 lore raw
Quoted 8 lines · Felix Frey

I'd like to connect a 32kx8 static RAM (battery buffered) to the ISAbus of my x86 based system to frequently store sensitive data which _must_ survive a powerfail. Access should be made through the mtd character device. By diving a bit into the code I saw there is a ram chip driver, however, I got pretty confused.
Do I have to write my own mapping driver or how can I tell the chip driver where it finds my RAM device and how large it is ?
Does the ram chip driver accept any parameters ?

Perhaps my article might help you. Have a look at
http://hedera.linuxnews.pl/_news/2002/09/03/_long/1445.html

My aim was to use mostly free GFX memory, but your seems to be similiar :)

regards,

Signature · 1 line
Michal Schulz