SRAM and MTD
Hi
I'd like to connect a 32kx8 static RAM (battery buffered) to the ISAbus of my x86 based system to frequently store sensitive data which _must_ survive a powerfail. Access should be made through the mtd character device. By diving a bit into the code I saw there is a ram chip driver, however, I got pretty confused.
Do I have to write my own mapping driver or how can I tell the chip driver where it finds my RAM device and how large it is ?
Does the ram chip driver accept any parameters ?
Any help is greatly appreciated.
Felix
Quoted 8 lines · Felix Frey
I'd like to connect a 32kx8 static RAM (battery buffered) to the ISAbus of my x86 based system to frequently store sensitive data which _must_ survive a powerfail. Access should be made through the mtd character device. By diving a bit into the code I saw there is a ram chip driver, however, I got pretty confused.
Do I have to write my own mapping driver or how can I tell the chip driver where it finds my RAM device and how large it is ?
Does the ram chip driver accept any parameters ?
Perhaps my article might help you. Have a look at
http://hedera.linuxnews.pl/_news/2002/09/03/_long/1445.html
My aim was to use mostly free GFX memory, but your seems to be similiar :)
regards,
Signature · 1 line
Michal Schulz