Skip to contentSkip to conversation

DINK32 R13.1 on Sandpoint X2

DISCUSSION Yuxiao Xi 2 participants 2 messages Sep 2, 2003 – Sep 3, 2003

lore
Share & tools
lore

Yuxiao Xi

author
#0 lore raw

Hi,all,
Now I'm working on a Motorola Sandpoint X2 board with ppc8240.
I use DINK32 r13.1 to boot my linux kernel image.
From DINK32 r13.1 user manual,I know that DINK32 r13.1 supports
ethernet card Realtek 8139,but after these steps:

       DINK32[MPC8240] {7} >>ni -i
        some configrations......

       DINK32[MPC7455] {8} >>ni
       NETWORK INFORMATION
            PCI CARD
            Type 8139/10EC on slot 16
            SETTINGS
            SERVER(TFTP) : 10. 18.15.27
            GATEWAY : 10. 18.15.254
            NETMASK : 255.255.255. 0
            DHCP : 0. 0. 0. 0
            CLIENT(DINK) : 10. 18.15.201
            DHCP: Disabled
            SESSION TIMEOUT: Never

Then I reset the system,but the Tealtek 8139 seems not to work correctly!:( I ping the board from my host computer with OS Redhat linux 9.0,but I can't get any response!
Can anyone help me?

����������������Yuxiao Xi
����������������[email protected]
��������������������2003-09-02

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 6 lines · Yuxiao Xi

Hi,all,
Now I'm working on a Motorola Sandpoint X2 board with ppc8240.
I use DINK32 r13.1 to boot my linux kernel image.
From DINK32 r13.1 user manual,I know that DINK32 r13.1 supports
ethernet card Realtek 8139,but after these steps:

What I would suggest is that instead of using the ethernet card support, you use the serial support still. DINK32 r13.0.0 and newer support 115200 baud, so loading a kernel via serial is now much less painful than it used to be.

--
Tom Rini
http://gate.crashing.org/~trini/

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/