scp running too slow
Hi!
I'm copying huge file from x86-64 machine to i386.
x86-64 is running 2.6.3-bk, today from Linus' cvs. tg3 driver. It shows pretty high CPU load (like 98% CPU), and is not even able to reach 1MB/sec. When x86-64 machine was running 2.4, I was able to get
Quoted 1 line
4MB/sec...
Any ideas?
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Hi!
Quoted 8 lines
I'm copying huge file from x86-64 machine to i386.
x86-64 is running 2.6.3-bk, today from Linus' cvs. tg3 driver. It shows pretty high CPU load (like 98% CPU), and is not even able to reach 1MB/sec. When x86-64 machine was running 2.4, I was able to get
Quoted 1 line
4MB/sec...
Any ideas?
Okay, probably my fault. That machine is running in PIO mode, and log was full of hda: lost interrupt; which explains poor performance. I need to enable chipset-specific dma support in kernel config.
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Quoted 8 lines · Pavel Machek
Hi!
I'm copying huge file from x86-64 machine to i386.
x86-64 is running 2.6.3-bk, today from Linus' cvs. tg3 driver. It shows pretty high CPU load (like 98% CPU), and is not even able to reach 1MB/sec. When x86-64 machine was running 2.4, I was able to get
Quoted 1 line
4MB/sec...
Could you provide slightly more data? like the output of vmstat 1 or a tcpdump. Also, is a transfer going the other way faster, does -C none help etc.
Signature · 2 lines
http://www.PowerDNS.com Open source, database driven DNS Software http://lartc.org Linux Advanced Routing & Traffic Control HOWTO