Skip to contentSkip to conversation

2.6.3/scsi: Unexpected busfree while idle

DISCUSSION [email protected] 1 participant 1 message Mar 18, 2004

lore
Share & tools
lore
#0 lore raw

Hi!

Quoted 8 lines

Hi all,

what does the following message mean (during scsi init at boot)?

scsi0: Unexpected busfree while idle
SEQADDR == 0x1

It appears each second or so, and the system can't move on. It only

happens if

Quoted 3 lines

a specific drive is on the scsi bus.

Does it mean that drive is broken?

Not necessarily. It might just fail to meet the timing specification the controller is demanding.
A similar effect occured with my scanner attached to a adaptec controller. BTW, which brand is your controller?

Quoted 1 line

The scsi bios (during system bootup, before linux) detects all discs

properly

Quoted 1 line

(including this one), and in the scsi bios i can "veryfiy media" and

it

Quoted 1 line

doesn't complain.

You might want to try whether the following is working - within the computers BIOS setup disable both external and internal caching temporarily. This makes the system extremely sloooooooooooow - but it made my scanner working. (That's no solution, of course! -- Just a way to trace the problem.)

Quoted 3 lines

Thanks in advance,

Florian

Hope it works,

Thomas