2.6.3/scsi: Unexpected busfree while idle
Hi!
Quoted 8 lines
Hi all,
what does the following message mean (during scsi init at boot)?
scsi0: Unexpected busfree while idle
SEQADDR ==0x1It appears each second or so, and the system can't move on. It only
happens if
Quoted 3 lines
a specific drive is on the scsi bus.
Does it mean that drive is broken?
Not necessarily. It might just fail to meet the timing specification the controller is demanding.
A similar effect occured with my scanner attached to a adaptec controller. BTW, which brand is your controller?
Quoted 1 line
The scsi bios (during system bootup, before linux) detects all discs
properly
Quoted 1 line
(including this one), and in the scsi bios i can "veryfiy media" and
it
Quoted 1 line
doesn't complain.
You might want to try whether the following is working - within the computers BIOS setup disable both external and internal caching temporarily. This makes the system extremely sloooooooooooow - but it made my scanner working. (That's no solution, of course! -- Just a way to trace the problem.)
Quoted 3 lines
Thanks in advance,
Florian
Hope it works,
Thomas