Skip to contentSkip to conversation

How to limit the Upload speed for an specific IP?

LARTC james jones 1 participant 1 message Mar 23, 2004

lore
Share & tools
lore
#0 lore raw

Message: 1
This is how I am marking and limiting both download and upload speeds for IP ranges. Maybe you can get some ideas from this:
http://www.geocities.com/jame_sj/

Hello,

I want to limit the upload speed for the eth0 Interface for an specific IP.

I used the following script, but its only limits the DOWNLOAD speed.But i want to limit both!

DEV='eth0'
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 prio 5 bounded isolated
tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst 192.168.0.2 flowid 1:1

Greetz
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/