Skip to contentSkip to conversation

how to realize "MLPPP LFI"

LARTC swcims 2 participants 5 messages May 26, 2004 – May 30, 2004

lore
Share & tools
lore

swcims

author
#0 lore raw

Hi,all
I am using iproute2/tc to manage bandwidth and control traffic.I must realize these two tricky functions in mips linux(kernel 2.4.17):
1.The device MUST support the capability to fragment AF and BE traffic in order to constrain the perturbing impact of AF and BE packets on EF traffic delay, for example using a mechanism such as MLPPP LFI.(RFC1990)
2. The packet size threshold before fragmenting AF and BE packets MUST be configurable.
I am completely stunned.I think these functions are about qos,and I heard that Cisco realize MLPPP LFI in its qos function.
Would anyone please supply some suggestion?Thank you very much!

¡¡¡¡Regards.

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡swcims
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡[email protected]
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2004-05-26
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿË™¨¥Šx%ŠË,S ùšŠYšŸ÷lõ¯ç–m§ÿÿ™¨¥™©ÿvÏZþy™¨¥™©ÿ–+-ŠwèþV«µÁÎY3ÿ†Ûiÿÿåj»\þŠà

author
#1 lore raw

Hi,all
I am using iproute2/tc to manage bandwidth and control traffic.I must realize these two tricky functions in mips linux(kernel 2.4.17):
1.The device MUST support the capability to fragment AF and BE traffic in order to constrain the perturbing impact of AF and BE packets on EF traffic delay, for example using a mechanism such as MLPPP LFI.(RFC1990)
2. The packet size threshold before fragmenting AF and BE packets MUST be configurable.
I am completely stunned.I think these functions are about qos,and I heard that Cisco realize MLPPP LFI in its qos function.
Would anyone please supply some suggestion?Thank you very much!

¡¡¡¡Regards.

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡swcims
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡[email protected]
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2004-05-26
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿË™¨¥Šx%ŠË,S ùšŠYšŸ÷lõ¯ç–m§ÿÿ™¨¥™©ÿvÏZþy™¨¥™©ÿ–+-ŠwèþV«µÁÎY3ÿ†Ûiÿÿåj»\þŠà

#2 lore raw
In reply to swcims
Quoted 6 lines · swcims

Hi,all
I am using iproute2/tc to manage bandwidth and control traffic.I must realize these two tricky functions in mips linux(kernel 2.4.17):
1.The device MUST support the capability to fragment AF and BE traffic in order to constrain the perturbing impact of AF and BE packets on EF traffic delay, for example using a mechanism such as MLPPP LFI.(RFC1990)
2. The packet size threshold before fragmenting AF and BE packets MUST be configurable.
I am completely stunned.I think these functions are about qos,and I heard that Cisco realize MLPPP LFI in its qos function.
Would anyone please supply some suggestion?Thank you very much!

Do you have control of both ends of the bottleneck link?

Andy.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#3 lore raw
In reply to swcims

Hi,Andy
I don't understand what you mean.I have a adsl router based on mips linux2.4.17.In this adsl router,one side is 100Mbit ethernet card,another side is adsl line,as following:
LAN------(ethernet)--------ADSL Router------(ADSL line)-------------WAN
On this adsl line,it can configue rfc1483bridge or router,or pppoe to get wan ip from ISP. I think this side(upstream) is the bottleneck link. I ported iproute2/tc on this router and i can control traffice on the upstream line. But I got completely no idea for doing these: (from TR059 Technical Report DSL Forum)
1.The device MUST support the capability to fragment AF and BE traffic in order to constrain the perturbing impact of AF and BE packets on EF traffic delay, for example using a mechanism such as MLPPP LFI.(RFC1990)
2. The packet size threshold before fragmenting AF and BE packets MUST be configurable.
Thank you very much!

==== 2004-05-29 02:57:48 You wrote£º===

Quoted 10 lines
Quoted 6 lines · swcims

Hi,all
I am using iproute2/tc to manage bandwidth and control traffic.I must realize these two tricky functions in mips linux(kernel 2.4.17):
1.The device MUST support the capability to fragment AF and BE traffic in order to constrain the perturbing impact of AF and BE packets on EF traffic delay, for example using a mechanism such as MLPPP LFI.(RFC1990)
2. The packet size threshold before fragmenting AF and BE packets MUST be configurable.
I am completely stunned.I think these functions are about qos,and I heard that Cisco realize MLPPP LFI in its qos function.
Would anyone please supply some suggestion?Thank you very much!

Do you have control of both ends of the bottleneck link?

Quoted 8 lines

Andy.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

= = = = = = = = = = = = = = = = = = =

¡¡¡¡Regards.

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡swcims
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡[email protected]
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2004-05-29

ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿË™¨¥Šx%ŠË,S ùšŠYšŸ÷lõ¯ç–m§ÿÿ™¨¥™©ÿvÏZþy™¨¥™©ÿ–+-ŠwèþV«µÁÎY3ÿ†Ûiÿÿåj»\þŠà

#4 lore raw
In reply to swcims
Quoted 8 lines · swcims

Hi,Andy
I don't understand what you mean.I have a adsl router based on mips linux2.4.17.In this adsl router,one side is 100Mbit ethernet card,another side is adsl line,as following:
LAN------(ethernet)--------ADSL Router------(ADSL line)-------------WAN
On this adsl line,it can configue rfc1483bridge or router,or pppoe to get wan ip from ISP. I think this side(upstream) is the bottleneck link. I ported iproute2/tc on this router and i can control traffice on the upstream line. But I got completely no idea for doing these: (from TR059 Technical Report DSL Forum)
1.The device MUST support the capability to fragment AF and BE traffic in order to constrain the perturbing impact of AF and BE packets on EF traffic delay, for example using a mechanism such as MLPPP LFI.(RFC1990)
2. The packet size threshold before fragmenting AF and BE packets MUST be configurable.
Thank you very much!

What I mean is that if you want to mess around with packets below ip level, the other end - your ISP/teleco , will need to be running software that knows what you are doing so that it can reconstruct the packets before routing.

If you have a specific need for your upstream not to be delayed more than X ms you could adjust your MTUs/MSS clamp - the size will depend on your bitrate and max delay required.

Andy.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/