Shapping traffic
Dear sirs,
I have the following situation:
I need to prioritize traffic as this: Higher priority UDP traffic from VoIP servers, Medium priority http port 80, low priority SMTP & POP ports 25 & 110.
Now, we run OSPF & BGP with Zebra routers on at least 8 different routers before going out to the Backbone provider.
As I understand, the problem with Zebra is that only hold 1 iptable.
If that is correct, this affect my capability of define QOS?
Any suggestions?
Sorry if this question is very elemental, but I 'm a rockie on LARTC
Thanks in advance for your help
Carlos Alperin
--
Open WebMail Project (http://openwebmail.org)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/