rtc misses interrupts after resume
I recently upgraded my laptop to 2.6.11.3 and removed the notsc boot option I added a fairly long time ago to see if things worked properly without it now. It seems to work, except that after a resume I get an awful lot of these messages:
Mar 15 09:53:04 typhoon kernel: rtc: lost some interrupts at 1024Hz. Mar 15 09:53:06 typhoon last message repeated 103 times
and indeed looking at /proc/interrupts interrupt 8 is not getting hit.
Wichert.
Signature · 2 lines
Wichert Akkerman <[email protected]> It is simple to make things. http://www.wiggy.net/ It is hard to make things simple.
Quoted 9 lines · Wichert Akkerman
I recently upgraded my laptop to 2.6.11.3 and removed the notsc boot option I added a fairly long time ago to see if things worked properly without it now. It seems to work, except that after a resume I get an awful lot of these messages:
Mar 15 09:53:04 typhoon kernel: rtc: lost some interrupts at 1024Hz. Mar 15 09:53:06 typhoon last message repeated 103 timesand indeed looking at
/proc/interruptsinterrupt 8 is not getting hit.
Can you add code to free_irq 8 before suspend and reacquire it after resume? If it helps then we have some interrupt routing problems...
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!