Skip to contentSkip to conversation

rtc misses interrupts after resume

DISCUSSION Wichert Akkerman 2 participants 2 messages Mar 15, 2005

lore
Share & tools
lore
#0 lore raw

I recently upgraded my laptop to 2.6.11.3 and removed the notsc boot option I added a fairly long time ago to see if things worked properly without it now. It seems to work, except that after a resume I get an awful lot of these messages:

Mar 15 09:53:04 typhoon kernel: rtc: lost some interrupts at 1024Hz.
Mar 15 09:53:06 typhoon last message repeated 103 times

and indeed looking at /proc/interrupts interrupt 8 is not getting hit.

Wichert.

Signature · 2 lines
Wichert Akkerman <[email protected]>    It is simple to make things.
http://www.wiggy.net/                   It is hard to make things simple.
#1 lore raw
Quoted 9 lines · Wichert Akkerman

I recently upgraded my laptop to 2.6.11.3 and removed the notsc boot option I added a fairly long time ago to see if things worked properly without it now. It seems to work, except that after a resume I get an awful lot of these messages:

Mar 15 09:53:04 typhoon kernel: rtc: lost some interrupts at 1024Hz.
Mar 15 09:53:06 typhoon last message repeated 103 times

and indeed looking at /proc/interrupts interrupt 8 is not getting hit.

Can you add code to free_irq 8 before suspend and reacquire it after resume? If it helps then we have some interrupt routing problems...

Pavel

Signature · 2 lines
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!