ATAPI DVD Drive looses dma settings on reset, keepsettings=1
Tested with Linux 2.6.15 and 2.6.13.3
I have an ATAPI DVD drive as a master(single) device on my secondary IDE (hdc).
The normal hdparm settings are:IO_support = 1 (32-bit)
unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 1 (on) readonly = 0 (off)
readahead = 256 (on)
However, if I force a reset with hdparm -w (or the Kernel does when I insert a disc that the drive takes too long to identify), DMA gets turned off. Dmesg reports:
hdc: DMA disabled
hdc: ATAPI reset complete
In the case where inserting a disc causes the reset, dmesg reports:
hdc: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: DMA disabled
hdc: ATAPI reset complete
Is there a way I can increate the irq timeout?
It was my understanding that with keepsettings on, the driver would retain the dma setting on reset. If there is a way correct this, or I have mis-understood the purpose of keepsettings, please CC me the response.
Thanks.