ixgb: driver update to 1.0.104-k4
Subsystems (2)
cover ixgb: driver update to 1.0.104-k4
Hi,
This is another resend of patches sent earlier by Jeff Kirsher and completes the resend for 1.0.104-kX.
Summary:
[1] add performance enhancements to the buffer_info struct
[2] implement copybreak
[3] increment version to 1.0.104-k4
These changes are available through git.
git pull git://lost.foo-projects.org/~ahkok/git/netdev-2.6 ixgb-1.0.104-k4
these patches are against
netdev-2.6#upstream c49022b28187de43af673d9c3a31743dd9228c7a
Cheers,
Auke
--- drivers/net/ixgb/ixgb.h | 1 drivers/net/ixgb/ixgb_main.c | 96 ++++++++++++++++++++++++++++-------------- 2 files changed, 66 insertions(+), 31 deletions(-)
--
Auke Kok <[email protected]>
PATCH 1/3 ixgb: add performance enhancements to the buffer_info struct
o modify the rx refill logic and tail bump
o add counter for failures
---
drivers/net/ixgb/ixgb.h | 1 + drivers/net/ixgb/ixgb_main.c | 74 +++++++++++++++++++++++++----------------- 2 files changed, 45 insertions(+), 30 deletions(-)
drivers/net/ixgb/ixgb.h +1 -0
@@ -200,6 +200,7 @@ struct ixgb_adapter {struct ixgb_hw hw;u16 msg_enable;struct ixgb_hw_stats stats; +uint32_t alloc_rx_buff_failed;#ifdef CONFIG_PCI_MSI boolean_t have_msi;#endif
drivers/net/ixgb/ixgb_main.c +44 -30
131 lines not on this page · raw message
--
Auke Kok <[email protected]>
PATCH 2/3 ixgb: use rx copybreak/skb recycle
In reply to Kok, Aukeo use rx copybreak/skb recycle
---
drivers/net/ixgb/ixgb_main.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-)
drivers/net/ixgb/ixgb_main.c +20 -0
@@ -1990,6 +1990,26 @@ ixgb_clean_rx_irq(struct ixgb_adapter *a goto rxdesc_done; } +/* code added for copybreak, this should improve +* performance for small packets with large amounts +* of reassembly being done in the stack */ +#define IXGB_CB_LENGTH 256 +if (length <IXGB_CB_LENGTH ) { +struct sk_buff *new_skb = +dev_alloc_skb (length +NET_IP_ALIGN ); +if (new_skb) { +skb_reserve (new_skb,NET_IP_ALIGN ); + new_skb->dev = netdev; +memcpy (new_skb->data -NET_IP_ALIGN , + skb->data -NET_IP_ALIGN , + length +NET_IP_ALIGN ); +/* save the skb in buffer_info as good */ + buffer_info->skb = skb; + skb = new_skb; + } + } +/* end copybreak code */ +/* Good Receive */ skb_put (skb, length);
--
Auke Kok <[email protected]>
PATCH 3/3 ixgb: increment version to 1.0.104-k4
In reply to Kok, AukeIncrement the driver version to 1.0.104-k4
---
drivers/net/ixgb/ixgb_main.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/ixgb/ixgb_main.c +1 -1
@@ -52,7 +52,7 @@ static char ixgb_driver_string[] = "Inte#else #define DRIVERNAPI "-NAPI"#endif -#define DRV_VERSION "1.0.104-k2"DRIVERNAPI +#define DRV_VERSION "1.0.104-k4"DRIVERNAPIchar ixgb_driver_version[] =DRV_VERSION ;static char ixgb_copyright[] ="Copyright (c) 1999-2005 Intel Corporation." ;
--
Auke Kok <[email protected]>
Quoted 8 lines · Auke
Hi,
This is another resend of patches sent earlier by Jeff Kirsher and completes the resend for 1.0.104-kX.
Summary:
Quoted 8 lines
[1] add performance enhancements to the
buffer_infostruct
[2] implement copybreak
[3] increment version to 1.0.104-k4These changes are available through git.
git pull
git://lost.foo-projects.org/~ahkok/git/netdev-2.6ixgb-1.0.104-k4
pulled