powernow with kt133
Hi all,
got the hint, that this mailing list will have an answer .. could be,hm? so i forward my questions ...
Quoted 19 lines
I googled now for more than a week to find a solution for my freezing problem. I used the VIA KT133 chipset on an MS-6330 (MSI K7T Pro 2-A) motherboard. Immediatly after I press the enter key to load the powernow-k7 module (kernel 2.6.17) everything is freezed. Even so fast that no log will be produced.
My first assumption was: compatibilty problems of the modul with my AMD Geode NX 1750.
-> no, definitly notsecond assumption: chipset problem, KT133 (and it's not the KT133A !) do not support
powernow! But .. I found a report where exactly this chipset will be used in a Notebook
http://stupidius.dyndns.org/linux_on_maxdata_m-book/index.html
-> in this case PST tables are available
-> but on my desktop system they are not --> thus, I used your patch ;)third and last assumption: The MS-6330 does something weired or better, doesn't handel
the FID signals or theFID_Changeprocedure in a correct way. Now, I'm not sure if this is a hardware problem or can be solved by software.
Quoted 5 lines
My question: Do you know something about this stuff?? Can you help me? Can help me
anyone?By the way: Do you know something about the VT8363 chipset register 55? On KT133A it
seems, it will enable the chipset for powernow!!??
wbr
armin
--
Ein Service von http://www.sms.at