Skip to contentSkip to conversation

PnP Bios activation of parallel port prior to request_region

DISCUSSION Darren Hart 2 participants 2 messages Oct 26, 2006 – Oct 27, 2006

lore
Share & tools
lore
#0 lore raw

While working with a very simple demo parallel port interrupt driver, I found that request_region() will successfully return, regardless of whether or not the pnp calls have been made to activite the parallel port on a pnp system.

The driver worked by just calling request_region() on another system, but on my laptop it wouldn't work unless I made the pnp activation calls before hand. The confusion came because the io range got assigned to my module, showed up in /proc/ioports, etc. So it appeared to be properly configured, but all the inb() calls returned 0xff.

I know have something working, but just wanted to ask if it is considered correct behavior for request_region() to succeed on an io range pertaining to a device that needs to be initialized by the pnp system and hasn't been.

Signature · 3 lines
Darren Hart
IBM Linux Technology Center
Realtime Linux Team
#1 lore raw
Quoted 11 lines · Darren Hart

While working with a very simple demo parallel port interrupt driver, I found that request_region() will successfully return, regardless of whether or not the pnp calls have been made to activite the parallel port on a pnp system.

The driver worked by just calling request_region() on another system, but on my laptop it wouldn't work unless I made the pnp activation calls before hand. The confusion came because the io range got assigned to my module, showed up in /proc/ioports, etc. So it appeared to be properly configured, but all the inb() calls returned 0xff.

I know have something working, but just wanted to ask if it is considered

"now"?

Quoted 2 lines

correct behavior for request_region() to succeed on an io range pertaining to a device that needs to be initialized by the pnp system and hasn't been.

I know that legacy parallel port must work regadless of any parport modules, using /dev/port and BIOS setup for EPP/ECP etc.

If you really want to be answered, try to address message (or cc) to e-mails mentioned in
- `linux/MAINTAINERS.*PARALLEL PORT*'
- `linux/drivers/parport/parport_pc.c'
____