PnP Bios activation of parallel port prior to request_region
While working with a very simple demo parallel port interrupt driver, I found that request_region() will successfully return, regardless of whether or not the pnp calls have been made to activite the parallel port on a pnp system.
The driver worked by just calling request_region() on another system, but on my laptop it wouldn't work unless I made the pnp activation calls before hand. The confusion came because the io range got assigned to my module, showed up in /proc/ioports, etc. So it appeared to be properly configured, but all the inb() calls returned 0xff.
I know have something working, but just wanted to ask if it is considered correct behavior for request_region() to succeed on an io range pertaining to a device that needs to be initialized by the pnp system and hasn't been.
Signature · 3 lines
Darren Hart IBM Linux Technology Center Realtime Linux Team
Quoted 11 lines · Darren Hart
While working with a very simple demo parallel port interrupt driver, I found that
request_region()will successfully return, regardless of whether or not the pnp calls have been made to activite the parallel port on a pnp system.The driver worked by just calling
request_region()on another system, but on my laptop it wouldn't work unless I made the pnp activation calls before hand. The confusion came because the io range got assigned to my module, showed up in/proc/ioports, etc. So it appeared to be properly configured, but all theinb()calls returned0xff.I know have something working, but just wanted to ask if it is considered
"now"?
Quoted 2 lines
correct behavior for
request_region()to succeed on an io range pertaining to a device that needs to be initialized by the pnp system and hasn't been.
I know that legacy parallel port must work regadless of any parport modules, using /dev/port and BIOS setup for EPP/ECP etc.
If you really want to be answered, try to address message (or cc) to e-mails mentioned in
- `linux/MAINTAINERS.*PARALLEL PORT*'
- `linux/drivers/parport/parport_pc.c'
____