Epox Presenter BT-PM01B: How to use buttons?
Hello,
I want to use this presenter under Linux: Kubuntu 6.10 Edgy Eft. But it doe= s =
not work. Perhaps somebody can help me.
First of all I shortly tell you, what I have done so far to get this thing = to =
work.
Using the bluezutils I can find the presenter and even connect to it.
"quote"
sascha@Sascha-Notebook:~$ hcitool scan
Scanning ...
<baddr> Presenter 838995 =sascha@Sascha-Notebook:~$ sudo hcitool cc <baddr> =
sascha@Sascha-Notebook:~$ hcitool info <baddr>
Requesting information ...
BD Address: <baddr>
Device Name: Presenter 838995
LMP Version: 1.1 (0x1) LMP Subversion: 0x436
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
sascha@Sascha-Notebook:~$ hcitool con
Connections:
< ACL <baddr> handle 41 state 1 lm MASTER
<park state> <RSSI> <channel quality> <SCO link> <HV2 packet=
s>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO>"quote end"
But the buttons do not work, so I cannot use the epox presenter. Then I searched in the internet and found the webpage
http://www.holtmann.org/linux/bluetooth/epox.html
There you can download a software especially written to use this presenter =
under linux. One has to compile this software with some scripts coming alon= g =
with the download.
But the problem is, that this software uses some old packages which I canno= t =
install =
"quote"
*cut some uninteresting stuff*
checking for libsdp... no
configure: error: SDP library not found.
Please compile and install bluez-sdp package.
sascha@Sascha-Notebook:~/Downloads/epox-presenter-0.2$ sudo apt-get install =
bluez-sdp
Password:
Paketlisten werden gelesen... Fertig
Abh=E4ngigkeitsbaum wird aufgebaut
Reading state information... Fertig
Paket bluez-sdp ist nicht verf=FCgbar, wird aber von einem anderen Paket referenziert. Das kann hei=DFen, dass das Paket fehlt, dass es veralt= et
ist oder nur aus einer anderen Quelle verf=FCgbar ist.
Doch die folgenden Pakete ersetzen es:
bluez-utils
E: Paket bluez-sdp hat keinen Installationskandidaten =
"quote end"
Sorry for the german text. But apt-get says, that this bluez-sdp is too old= , =
Now one has to use "bluez-utilz" which I have already installed on my =
computer.
Does anyone have an idea how I can get this Presenter finally work?
Thanks a lot
Sascha
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Sascha,
Quoted 4 lines
I want to use this presenter under Linux: Kubuntu 6.10 Edgy Eft. But it does not work. Perhaps somebody can help me.
First of all I shortly tell you, what I have done so far to get this thing to work.
it is enough to call "hidd --connect <bdaddr>".
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Marcel,
Quoted 9 lines
Hi Sascha,
Quoted 4 lines
I want to use this presenter under Linux: Kubuntu 6.10 Edgy Eft. But it does not work. Perhaps somebody can help me.
First of all I shortly tell you, what I have done so far to get this thing to work.it is enough to call "hidd --connect <bdaddr>".
Yes it is enough, now it works fine. Thanks for the solution to my problem. Well I have not expected such easy way to solve it. I always tried hcitool to connect the presenter.
thanks again
greetings
Sascha
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users