Skip to contentSkip to conversation

Epox Presenter BT-PM01B: How to use buttons?

Bluez-users Sascha Turczyk 2 participants 3 messages Feb 19, 2007 – Feb 24, 2007 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hello,

I want to use this presenter under Linux: Kubuntu 6.10 Edgy Eft. But it doe= s =

not work. Perhaps somebody can help me.
First of all I shortly tell you, what I have done so far to get this thing = to =

work.

Using the bluezutils I can find the presenter and even connect to it.

"quote"

sascha@Sascha-Notebook:~$ hcitool scan
Scanning ...
        <baddr>       Presenter 838995 =
sascha@Sascha-Notebook:~$ sudo hcitool cc <baddr> =
sascha@Sascha-Notebook:~$ hcitool info <baddr>
Requesting information ...
        BD Address:  <baddr>
        Device Name: Presenter 838995
        LMP Version: 1.1 (0x1) LMP Subversion: 0x436
        Manufacturer: Cambridge Silicon Radio (10)
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
                <3-slot packets> <5-slot packets> <encryption> <slot offset>
                <timing accuracy> <role switch> <hold mode> <sniff mode>
 sascha@Sascha-Notebook:~$ hcitool con
Connections:
        < ACL <baddr> handle 41 state 1 lm MASTER
               <park state> <RSSI> <channel quality> <SCO link> <HV2 packet=
s>
                <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
                <power control> <transparent SCO>

"quote end"

But the buttons do not work, so I cannot use the epox presenter. Then I searched in the internet and found the webpage

http://www.holtmann.org/linux/bluetooth/epox.html

There you can download a software especially written to use this presenter =

under linux. One has to compile this software with some scripts coming alon= g =

with the download.
But the problem is, that this software uses some old packages which I canno= t =

install =

"quote"

*cut some uninteresting stuff*
checking for libsdp... no
configure: error: SDP library not found.
Please compile and install bluez-sdp package.

sascha@Sascha-Notebook:~/Downloads/epox-presenter-0.2$ sudo apt-get install =

bluez-sdp
Password:
Paketlisten werden gelesen... Fertig
Abh=E4ngigkeitsbaum wird aufgebaut
Reading state information... Fertig
Paket bluez-sdp ist nicht verf=FCgbar, wird aber von einem anderen Paket referenziert. Das kann hei=DFen, dass das Paket fehlt, dass es veralt= et
ist oder nur aus einer anderen Quelle verf=FCgbar ist.
Doch die folgenden Pakete ersetzen es:
bluez-utils
E: Paket bluez-sdp hat keinen Installationskandidaten =

"quote end"

Sorry for the german text. But apt-get says, that this bluez-sdp is too old= , =

Now one has to use "bluez-utilz" which I have already installed on my =

computer.

Does anyone have an idea how I can get this Presenter finally work?

Thanks a lot

Sascha

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi Sascha,

Quoted 4 lines

I want to use this presenter under Linux: Kubuntu 6.10 Edgy Eft. But it does not work. Perhaps somebody can help me.
First of all I shortly tell you, what I have done so far to get this thing to work.

it is enough to call "hidd --connect <bdaddr>".

Regards

Marcel

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw

Hi Marcel,

Quoted 9 lines

Hi Sascha,

Quoted 4 lines

I want to use this presenter under Linux: Kubuntu 6.10 Edgy Eft. But it does not work. Perhaps somebody can help me.
First of all I shortly tell you, what I have done so far to get this thing to work.

it is enough to call "hidd --connect <bdaddr>".

Yes it is enough, now it works fine. Thanks for the solution to my problem. Well I have not expected such easy way to solve it. I always tried hcitool to connect the presenter.

thanks again

greetings
Sascha

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users