Use an unsigned type for irq number
PATCH 1/1 Use an unsigned type for irq number
There are three places in the sym2 driver which print out an interrupt number; all need to be changed to unsigned
Signed-off-by Matthew Wilcox <[email protected]>
drivers/scsi/sym53c8xx_2/sym_glue.c +3 -3
@@ -1189,7 +1189,7 @@ static int sym_host_info(struct Scsi_Host *shost, char *ptr, off_t offset, int lcopy_info (&info,"Chip " NAME53C "%s, device id 0x%x, " "revision id 0x%x\n" , np->s.chip_name, pdev->device, pdev->revision); -copy_info (&info,"At PCI address %s, IRQ %d\n" , +copy_info (&info,"At PCI address %s, IRQ %u\n" ,pci_name (pdev), pdev->irq); copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n", (int) (np->minsync_dt ? np->minsync_dt : np->minsync),
@@ -1275,7 +1275,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,unsigned long flags;struct sym_fw *fw; -printk (KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %d\n" , +printk (KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n" , unit, dev->chip.name, pdev->revision,pci_name (pdev), pdev->irq);
@@ -1359,7 +1359,7 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,*/ if (request_irq (pdev->irq, sym53c8xx_intr,IRQF_SHARED ,NAME53C8XX , shost)) { -printf_err ("%s: request irq %d failure\n" , +printf_err ("%s: request irq %u failure\n" ,sym_name (np), pdev->irq); goto attach_failed; }
Signature · 4 lines
Intel are signing my paycheques ... these opinions are still mine "Bill, look, we understand that you're interested in selling us this operating system, but compare it to ours. We can't possibly take such a retrograde step."