Skip to contentSkip to conversation

Simple Example isnt working (ssh/bulk traffic)

LARTC Julius 2 participants 3 messages Dec 4, 2007 – Dec 5, 2007

lore
Share & tools
lore

Julius

author
#0 lore raw

Hi,

the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong?

INTERFACE=eth0

#clear all on $INTERFACE
tc qdisc del dev $INTERFACE root

tc qdisc add dev $INTERFACE root handle 1:0 htb default 15
#root qdics, allows borrowing for its children
tc class add dev $INTERFACE parent 1:0 classid 1:1 htb rate 100kbps ceil 100kbps
#ssh qdisc
tc class add dev $INTERFACE parent 1:1 classid 1:5 htb rate 20kbps ceil 100kbps prio 2
#other traffic
tc class add dev $INTERFACE parent 1:1 classid 1:15 htb rate 80kbps ceil 100kbps prio 10
#filter ssh
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip dport 22 0xffff flowid 1:5
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip sport 22 0xffff flowid 1:5

greets
Julius
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

Hello,

Quoted 7 lines · Julius

Hi,

the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong?

INTERFACE=eth0

are you mixing egress with ingress? (IMQ in that case) What's you network-configuration (it's a router? what eths)?

And yes, kbps actually is kbyte/s, kbit for kbit/s.

If all should be setup right, what does

# tc -s -d class show dev eth0
say?

Bye,
Andreas
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

author
#2 lore raw
In reply to Julius
Quoted 5 lines · On Tuesday 04 December 2007 20:45:54 Andreas Mueller wrote:

Hello,

Quoted 2 lines · Julius

Hi,

Quoted 8 lines
Quoted 5 lines

the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong?

INTERFACE=eth0

are you mixing egress with ingress? (IMQ in that case) What's you network-configuration (it's a router? what eths)?

ah, yes i did.

INTERFACE=ppp0

#alles löschen
tc qdisc del dev $INTERFACE root

tc qdisc add dev $INTERFACE root handle 1:0 htb default 15
tc class add dev $INTERFACE parent 1:0 classid 1:1 htb rate 11kbps tc class add dev $INTERFACE parent 1:1 classid 1:5 htb rate 6kbps ceil 11kbps prio 2
tc class add dev $INTERFACE parent 1:1 classid 1:15 htb rate 5kbps ceil 11kbps prio 10
#ssh filtern
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip dport 22 0xffff flowid 1:5
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip sport 22 0xffff flowid 1:5

Network setup:

my pc ---- internet ---- router@home

I want to connect to router@home, traffic shaping is done on the router. The router can do 120kb/s down and 14kb/s up. This works so far, have to test these settings for some time.

greets
Julius
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc