Simple Example isnt working (ssh/bulk traffic)
Hi,
the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong?
INTERFACE=eth0
#clear all on $INTERFACE
tc qdisc del dev $INTERFACE root
tc qdisc add dev $INTERFACE root handle 1:0 htb default 15
#root qdics, allows borrowing for its children
tc class add dev $INTERFACE parent 1:0 classid 1:1 htb rate 100kbps ceil 100kbps
#ssh qdisc
tc class add dev $INTERFACE parent 1:1 classid 1:5 htb rate 20kbps ceil 100kbps prio 2
#other traffic
tc class add dev $INTERFACE parent 1:1 classid 1:15 htb rate 80kbps ceil 100kbps prio 10
#filter ssh
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip dport 22 0xffff flowid 1:5
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip sport 22 0xffff flowid 1:5
greets
Julius
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hello,
Quoted 7 lines · Julius
Hi,
the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong?
INTERFACE=eth0
are you mixing egress with ingress? (IMQ in that case) What's you network-configuration (it's a router? what eths)?
And yes, kbps actually is kbyte/s, kbit for kbit/s.
If all should be setup right, what does
# tc -s -d class show dev eth0 say?
Bye,
Andreas
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 5 lines · On Tuesday 04 December 2007 20:45:54 Andreas Mueller wrote:
Hello,
Quoted 2 lines · Julius
Hi,
Quoted 8 lines
Quoted 5 lines
the script below should allow to get ssh connections running well while downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still download with 500+kb/s. Whats wrong?
INTERFACE=eth0
are you mixing egress with ingress? (IMQ in that case) What's you network-configuration (it's a router? what eths)?
ah, yes i did.
INTERFACE=ppp0
#alles löschen
tc qdisc del dev $INTERFACE root
tc qdisc add dev $INTERFACE root handle 1:0 htb default 15
tc class add dev $INTERFACE parent 1:0 classid 1:1 htb rate 11kbps tc class add dev $INTERFACE parent 1:1 classid 1:5 htb rate 6kbps ceil 11kbps prio 2
tc class add dev $INTERFACE parent 1:1 classid 1:15 htb rate 5kbps ceil 11kbps prio 10
#ssh filtern
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip dport 22 0xffff flowid 1:5
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip sport 22 0xffff flowid 1:5
Network setup:
my pc ---- internet ---- router@home
I want to connect to router@home, traffic shaping is done on the router. The router can do 120kb/s down and 14kb/s up. This works so far, have to test these settings for some time.
greets
Julius
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc