Skip to contentSkip to conversation

Add Epson RX8025 RTC support

PATCH RESEND Superseded Matthias Fuchs 3 participants 4 messages Dec 27, 2007 – Jan 9, 2008 Real time clock (RTC)

lore
Share & tools
lore

Matthias Fuchs

author
#0 lore raw

PATCH RESEND 1/1 Add Epson RX8025 RTC support

Signed-off-by Matthias Fuchs <[email protected]>
---
 drivers/rtc/Makefile |    1 +
 drivers/rtc/rx8025.c |  227 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/rx8025.c
drivers/rtc/Makefile +1 -0
index 1d6016e..28a520f 100644
@@ -49,6 +49,7 @@ COBJS-y += mpc8xx.o
 COBJS-y += pcf8563.o
 COBJS-y += s3c24x0_rtc.o
 COBJS-y += rs5c372.o
+COBJS-y += rx8025.o
 COBJS-y += mcfrtc.o
 COBJS-y += x1205.o
drivers/rtc/rx8025.c new file +227 -0

227 lines not on this page · raw message

Signature · 1 line
1.5.3
#1 lore raw

PATCH RESEND 1/1 Add Epson RX8025 RTC support

Quoted 12 lines · Matthias Fuchs
Signed-off-by Matthias Fuchs <[email protected]>
---
 drivers/rtc/Makefile |    1 +
 drivers/rtc/rx8025.c |  227 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/rx8025.c
drivers/rtc/Makefile +0 -0
index 1d6016e..28a520f 100644

drivers/rtc/Makefile COBJS-y += mpc8xx.o · line 51

Quoted 3 lines
drivers/rtc/Makefile +0 -0
@@ -49,6 +49,7 @@ COBJS-y += mpc8xx.o
 COBJS-y += pcf8563.o
 COBJS-y += s3c24x0_rtc.o
 COBJS-y += rs5c372.o

Could you add this
COBJS-$(CONFIG_RTC_RX8025) += rx8025.c
instead of

drivers/rtc/Makefile COBJS-y += mpc8xx.o · line 52

Quoted 1 line
drivers/rtc/Makefile +1 -0
+COBJS-y += rx8025.o

and on consequence remove the "define(CONFIG_RTC_RX8025)" from the drivers.

I've start the drivers Makefile merge for the KConfig.

Best Regards,
J.

author
#2 lore raw

PATCH RESEND 1/1 Add Epson RX8025 RTC support

Quoted 9 lines · Jean-Christophe PLAGNIOL-VILLARD

Could you add this
COBJS-$(CONFIG_RTC_RX8025) += rx8025.c
instead of

Quoted 1 line

+COBJS-y += rx8025.o

and on consequence remove the "define(CONFIG_RTC_RX8025)" from the drivers.

I can do that. Do you want me to do that for all RTC drivers in that Makefile? I prefer to keep the patch as is and then generate a separate patch that updates the complete Makefile to the KConfig style. What do you think?

Matthias

#3 lore raw

PATCH RESEND 1/1 Add Epson RX8025 RTC support

In reply to Matthias Fuchs
Quoted 6 lines · In message <[email protected]> you wrote:
Signed-off-by Matthias Fuchs <[email protected]>
---
 drivers/rtc/Makefile |    1 +
 drivers/rtc/rx8025.c |  227 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 228 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/rx8025.c

Aplied, thanks.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
panic: kernel trap (ignored)