dma error on boot with cf card
hi,
i have a problem using a cf card with an ide adapter. using debian kernel 2.6.18-5
on boot:
Feb 5 17:38:06 kernel: hdd: max request size: 128KiB
Feb 5 17:38:06 kernel: hdd: 2000880 sectors (1024 MB) w/2KiB Cache,
CHS=1985/16/63, UDMA(33)
Feb 5 17:38:06 kernel: hdd:<4>hdd: dma_timer_expiry: dma status == 0x41
Feb 5 17:38:06 kernel: hdd: DMA timeout error
Feb 5 17:38:06 kernel: hdd: dma timeout error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 5 17:38:06 kernel: ide: failed opcode was: unknown
Feb 5 17:38:06 kernel: hdd: irq timeout: status=0xd0 { Busy }
Feb 5 17:38:06 kernel: ide: failed opcode was: unknown
Feb 5 17:38:06 kernel: ide1: reset timed-out, status=0xff
Feb 5 17:38:06 kernel: hdd: status timeout: status=0xff { Busy }
Feb 5 17:38:06 kernel: ide: failed opcode was: unknown
Feb 5 17:38:06 kernel: hdd: drive not ready for command
Feb 5 17:38:06 kernel: ide1: reset timed-out, status=0xff
Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 0
Feb 5 17:38:06 kernel: Buffer I/O error on device hdd, logical block 0
Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 0
Feb 5 17:38:06 kernel: Buffer I/O error on device hdd, logical block 0
Feb 5 17:38:06 kernel: unable to read partition table
Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 2000640
Feb 5 17:38:06 kernel: Buffer I/O error on device hdd, logical block 250080
Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 2000640any ideas?
regards
Marc
Quoted 21 lines · Marc Donner
hi,
i have a problem using a cf card with an ide adapter. using debian kernel 2.6.18-5
on boot:
Feb 5 17:38:06 kernel: hdd: max request size: 128KiB Feb 5 17:38:06 kernel: hdd: 2000880 sectors (1024 MB) w/2KiB Cache, CHS=1985/16/63, UDMA(33) Feb 5 17:38:06 kernel: hdd:<4>hdd: dma_timer_expiry: dma status == 0x41 Feb 5 17:38:06 kernel: hdd: DMA timeout error Feb 5 17:38:06 kernel: hdd: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest } Feb 5 17:38:06 kernel: ide: failed opcode was: unknown Feb 5 17:38:06 kernel: hdd: irq timeout: status=0xd0 { Busy } Feb 5 17:38:06 kernel: ide: failed opcode was: unknown Feb 5 17:38:06 kernel: ide1: reset timed-out, status=0xff Feb 5 17:38:06 kernel: hdd: status timeout: status=0xff { Busy } Feb 5 17:38:06 kernel: ide: failed opcode was: unknown Feb 5 17:38:06 kernel: hdd: drive not ready for command Feb 5 17:38:06 kernel: ide1: reset timed-out, status=0xff
Quoted 8 lines
Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 0 Feb 5 17:38:06 kernel: Buffer I/O error on device hdd, logical block 0 Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 0 Feb 5 17:38:06 kernel: Buffer I/O error on device hdd, logical block 0 Feb 5 17:38:06 kernel: unable to read partition table Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 2000640 Feb 5 17:38:06 kernel: Buffer I/O error on device hdd, logical block 250080 Feb 5 17:38:06 kernel: end_request: I/O error, dev hdd, sector 2000640
Adapter doesn't support DMA, but controller and CF cards do. To fix, tell the system NOT to use dma on that interface.
Most IDE to CF adapters fail to connect the DMA pins correctly since it was a fairly (3 or 4 years ago) revision to the CF spec to support DMA at all.
--
Len Sorensen
Quoted 9 lines · you
Quoted 5 lines · Marc Donner
hi,
i have a problem using a cf card with an ide adapter. using debian kernel 2.6.18-5
Adapter doesn't support DMA, but controller and CF cards do. To fix, tell the system NOT to use dma on that interface.
and how do i disable dma? it is the installer image, and no hdparm is availible. and the ide=nodma boot parameter seems not to work.
Marc
Quoted 2 lines · Marc Donner
and how do i disable dma? it is the installer image, and no hdparm is availible. and the ide=nodma boot parameter seems not to work.
ide=nodma works for me on 2.6.18. I think on newer kernels you need hda=nodma which is nice since you can control it per device rather than globally.
--
Len Sorensen