x86: UV runtime bios calls
cover x86: UV runtime bios calls
[PATCH 0/4] x86: UV runtime bios calls
Purpose:
Create an interface to allow calls into bios to return platform specific information. The interface uses EFI SAL table entry. EFI provides a mechanism for defining function pointers to firmware routines. This patchset builds on the EFI mechanism to provide access to those firmware routines.
Patches:
uv_efi_bios: Look for SAL entry in EFI tables.
uv_bios_common: Add the EFI callback function using the EFI table
entry. Create associated wrapper code. Initialize SAL system table entry info at boot time.
uv_bios_call_partition: Add call to get partitioning related info.
uv_sysfs: Create sysfs entrys in /sys/firmware/sgi_uv/ for
partitioning related information.
Implementation comments:
This patch uses sal_systab. sal_systab is used on ia64, but was not used on x86. An alternative would be to create a new EFI entry type (uv_systab), though that would require adding to struct efi.
The location in sysfs (/sys/firmware/sgi_uv/) is based on community feedback.
If EFI is not configured (CONFIG_EFI), the calls will return -ENOSYS. If run on a system with a bios that does not supportes EFI SAL, the calls will return -ENOSYS.
Paul Jackson assisted in the development of this code.
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead SGI - Silicon Graphics Inc [email protected]
Hi, Russ,
This seems to include a extension to EFI runtime services. Why not also discuss that on UEFI forum? You can get some information about UEFI forum from http://www.uefi.org/.
Best Regards,
Huang Ying
Quoted 37 lines · Russ Anderson
[PATCH 0/4] x86: UV runtime bios calls
Purpose:
Create an interface to allow calls into bios to return platform specific information. The interface uses EFI SAL table entry. EFI provides a mechanism for defining function pointers to firmware routines. This patchset builds on the EFI mechanism to provide access to those firmware routines.Patches:
uv_efi_bios: Look for SAL entry in EFI tables.
uv_bios_common: Add the EFI callback function using the EFI table
entry. Create associated wrapper code. Initialize SAL system table entry info at boot time.
uv_bios_call_partition: Add call to get partitioning related info.
uv_sysfs: Create sysfs entrys in/sys/firmware/sgi_uv/for
partitioning related information.Implementation comments:
This patch uses
sal_systab.sal_systabis used on ia64, but was not used on x86. An alternative would be to create a new EFI entry type (uv_systab), though that would require adding to struct efi.The location in sysfs (
/sys/firmware/sgi_uv/) is based on community feedback.If EFI is not configured (
CONFIG_EFI), the calls will return-ENOSYS. If run on a system with a bios that does not supportes EFI SAL, the calls will return-ENOSYS.Paul Jackson assisted in the development of this code.
Hi, Russ,
Quoted 4 lines · Russ Anderson
This patch uses
sal_systab.sal_systabis used on ia64, but was not used on x86. An alternative would be to create a new EFI entry type (uv_systab), though that would require adding to struct efi.
I don't think it is a good idea to use sal_systab, if it is not a real sal_systab. It's better to add new field such as uv_systab to struct efi, which is not defined by UEFI standard, so can be changed.
Best Regards,
Huang Ying
Quoted 11 lines · Huang Ying
Hi, Russ,
Quoted 4 lines · Russ Anderson
This patch uses
sal_systab.sal_systabis used on ia64, but was not used on x86. An alternative would be to create a new EFI entry type (uv_systab), though that would require adding to struct efi.I don't think it is a good idea to use
sal_systab, if it is not a realsal_systab. It's better to add new field such asuv_systabto struct efi, which is not defined by UEFI standard, so can be changed.
OK. My first development version took that approach, so it I just have to put that code back in.
Thanks,
Signature · 2 lines
Russ Anderson, OS RAS/Partitioning Project Lead SGI - Silicon Graphics Inc [email protected]