Leadtek WinFast DTV-1800H and DTV-2000H
PATCH 1/1 Leadtek WinFast DTV-1800H and DTV-2000H
In reply to a message not in the archiveHi, few months ago I sent the patch for Leadtek WinFast DTV-1800H card, but it wasn't merged to repository yet. Maybe it's because of the merging of mailing lists. I'm sending it again.
These are the original messages:
http://linuxtv.org/pipermail/linux-dvb/2008-October/029859.html
http://linuxtv.org/pipermail/linux-dvb/2008-November/030362.html
Briefly, patch adds support for analog tv, radio, dvb-t and remote control. About three people already confirmed the functionality.
----
The second patch I attached (leadtek_winfast_dtv2000h.patch) is from Mirek Slugeň and it adds support for some revisions of Leadtek WinFast DTV-2000H. I don't have any of DTV-2000H cards, so I cannot confirm its correctness.
Here is the original message from Mirek Slugeň:
http://linuxtv.org/pipermail/linux-dvb/2008-November/030644.html
(The patch is dependent on 1800H patch.)
----
I hope this is the last time I'm bothering you with this thing. ;)
- Miroslav Šustek
Adds support for Leadtek WinFast DTV-1800H
From: Miroslav Sustek <[email protected]>
Enables analog tv and radio, dvb-t and (gpio) remote control.
linux/Documentation/video4linux/CARDLIST.cx88 +1 -0
@@ -77,3 +77,4 @@ 76 -> SATTRADE ST4200 DVB-S/S2 [b200:4200] 77 -> TBS 8910 DVB-S [8910:8888] 78 -> Prof 6200 DVB-S [b022:3022] + 79 -> Leadtek WinFast DTV1800 Hybrid [107d:6654]
linux/drivers/media/video/cx88/cx88-cards.c +75 -0
111 lines not on this page · raw message
linux/drivers/media/video/cx88/cx88-dvb.c +1 -0
@@ -1015,6 +1015,7 @@ }break ;case CX88_BOARD_PINNACLE_HYBRID_PCTV : +case CX88_BOARD_WINFAST_DTV1800H : fe0->dvb.frontend =dvb_attach (zl10353_attach, &cx88_pinnacle_hybrid_pctv, &core->i2c_adap);
linux/drivers/media/video/cx88/cx88-input.c +2 -0
@@ -93,6 +93,7 @@ gpio=(gpio &0x7fd ) + (auxgpio &0xef );break ;case CX88_BOARD_WINFAST_DTV1000 : +case CX88_BOARD_WINFAST_DTV1800H : gpio = (gpio &0x6ff ) | ((cx_read (MO_GP1_IO ) <<8 ) &0x900 ); auxgpio = gpio;break ;
@@ -244,6 +245,7 @@ ir->sampling =1 ;break ;case CX88_BOARD_WINFAST_DTV2000H : +case CX88_BOARD_WINFAST_DTV1800H : ir_codes = ir_codes_winfast; ir->gpio_addr =MO_GP0_IO ; ir->mask_keycode =0x8f8 ;
linux/drivers/media/video/cx88/cx88.h +1 -0
@@ -232,6 +232,7 @@#define CX88_BOARD_SATTRADE_ST4200 76#define CX88_BOARD_TBS_8910 77#define CX88_BOARD_PROF_6200 78 +#define CX88_BOARD_WINFAST_DTV1800H 79enum cx88_itype {CX88_VMUX_COMPOSITE1 =1 ,
linux/drivers/media/video/cx88/cx88-cards.c +108 -8
152 lines not on this page · raw message
linux/drivers/media/video/cx88/cx88-dvb.c +3 -1
@@ -695,7 +695,8 @@ goto frontend_detach; }break ; -case CX88_BOARD_WINFAST_DTV2000H : +case CX88_BOARD_WINFAST_DTV2000H_I : +case CX88_BOARD_WINFAST_DTV2000H_J :case CX88_BOARD_HAUPPAUGE_HVR1100 :case CX88_BOARD_HAUPPAUGE_HVR1100LP :case CX88_BOARD_HAUPPAUGE_HVR1300 :
@@ -1016,6 +1017,7 @@break ;case CX88_BOARD_PINNACLE_HYBRID_PCTV :case CX88_BOARD_WINFAST_DTV1800H : +case CX88_BOARD_WINFAST_DTV2000H_PLUS : fe0->dvb.frontend =dvb_attach (zl10353_attach, &cx88_pinnacle_hybrid_pctv, &core->i2c_adap);
linux/drivers/media/video/cx88/cx88-input.c +6 -1
@@ -94,6 +94,9 @@break ;case CX88_BOARD_WINFAST_DTV1000 :case CX88_BOARD_WINFAST_DTV1800H : +case CX88_BOARD_WINFAST_DTV2000H_I : +case CX88_BOARD_WINFAST_DTV2000H_J : +case CX88_BOARD_WINFAST_DTV2000H_PLUS : gpio = (gpio &0x6ff ) | ((cx_read (MO_GP1_IO ) <<8 ) &0x900 ); auxgpio = gpio;break ;
@@ -244,8 +247,10 @@ ir_type =IR_TYPE_RC5 ; ir->sampling =1 ;break ; -case CX88_BOARD_WINFAST_DTV2000H :case CX88_BOARD_WINFAST_DTV1800H : +case CX88_BOARD_WINFAST_DTV2000H_I : +case CX88_BOARD_WINFAST_DTV2000H_J : +case CX88_BOARD_WINFAST_DTV2000H_PLUS : ir_codes = ir_codes_winfast; ir->gpio_addr =MO_GP0_IO ; ir->mask_keycode =0x8f8 ;
linux/drivers/media/video/cx88/cx88.h +3 -1
@@ -204,7 +204,7 @@#define CX88_BOARD_KWORLD_MCE200_DELUXE 48#define CX88_BOARD_PIXELVIEW_PLAYTV_P7000 49#define CX88_BOARD_NPGTECH_REALTV_TOP10FM 50 -#define CX88_BOARD_WINFAST_DTV2000H 51 +#define CX88_BOARD_WINFAST_DTV2000H_I 51#define CX88_BOARD_GENIATECH_DVBS 52#define CX88_BOARD_HAUPPAUGE_HVR3000 53#define CX88_BOARD_NORWOOD_MICRO 54
@@ -233,6 +233,8 @@#define CX88_BOARD_TBS_8910 77#define CX88_BOARD_PROF_6200 78#define CX88_BOARD_WINFAST_DTV1800H 79 +#define CX88_BOARD_WINFAST_DTV2000H_J 80 +#define CX88_BOARD_WINFAST_DTV2000H_PLUS 81enum cx88_itype {CX88_VMUX_COMPOSITE1 =1 ,
Hi,
Am Sonntag, den 01.02.2009, 17:37 +0100 schrieb Miroslav Šustek:
Quoted 17 lines
Hi, few months ago I sent the patch for Leadtek WinFast DTV-1800H card, but it wasn't merged to repository yet. Maybe it's because of the merging of mailing lists. I'm sending it again.
These are the original messages:
http://linuxtv.org/pipermail/linux-dvb/2008-October/029859.html
http://linuxtv.org/pipermail/linux-dvb/2008-November/030362.htmlBriefly, patch adds support for analog tv, radio, dvb-t and remote control. About three people already confirmed the functionality.
----The second patch I attached (leadtek_winfast_dtv2000h.patch) is from Mirek Slugeň and it adds support for some revisions of Leadtek WinFast DTV-2000H. I don't have any of DTV-2000H cards, so I cannot confirm its correctness.
Here is the original message from Mirek Slugeň:
http://linuxtv.org/pipermail/linux-dvb/2008-November/030644.html
Quoted 7 lines
(The patch is dependent on 1800H patch.)
----I hope this is the last time I'm bothering you with this thing. ;)
- Miroslav Šustek
Miroslav, Mirek, looks OK so far,
but biggest problem is that all patches have no Signed-off-by line. Try README.patches in v4l-dvb and related.
The not at all working radio on the DTV2000H_J could indicate that it is a FMD1216MEX with different radio IF, which was recently added by Darron Broad. Good idea how they did expand the antenna input connectors.
Also, for the unsupported XCeive4000 on the DTV2000H_PLUS I guess TUNER_ABSENT should be used until support for it is ready and all related ?
There is another patch from Mirek for saa7134 with multiple multi frontend boards from Nov. 28 2008 where I asked for his SOB, but no response. It has at least a tested-by from me and an updated version against recent v4l-dvb can be provided.
http://www.linuxtv.org/pipermail/linux-dvb/2009-January/031217.html
Mauro seems to prefer to have v4l-dvb related e-mails at infradead.org. Changed to it.
Cheers,
Hermann