Skip to contentSkip to conversation

ARM DaVinci Adding DM357 Support

PATCH New David Brownell 1 participant 1 message May 11, 2009

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 ARM DaVinci Adding DM357 Support

Minor nit: for consistency with "dvevm" and "dm355evm", I suggest removing the underscore from "dm357_evm" in the directory name.

include/configs/davinci_dm357_evm.h line 6

Quoted 9 lines
include/configs/davinci_dm357_evm.h new file +6 -0
@@ -0,0 +1,155 @@
+...
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+#include <asm/arch/hardware.h>

Breaks builds, since <config.h> is included by ASM code and <asm/arch/hardware.h> includes C declarations (which are invalid ASM syntax).

include/configs/davinci_dm357_evm.h

Quoted 3 lines
include/configs/davinci_dm357_evm.h new file +2 -0
+#define CONFIG_STACKSIZE               0x40000
...
+#define CONFIG_STACKSIZE               /* Input clock */

Also breaks builds, for a different reason. The second one is clearly nonsense ...

I'd also be interested to know if the appended patchlet, in conjunction with the NAND chipselect cleanup patch I posted, provides proper access to the second NAND chip. It should report a total of 2112 MBytes in the startup message, and "nand devices" should report two chips.

Obviously I couldn't compile-test because of the above issues ... but it looks more or less right; it's just a copy of the dm355evm stuff that works, so the question is whether the driver is handling both nCEO and nCE2 chipselect flavors right.

There are also a few things I'd change in the dm357 config
heade: enabling the NAND-resident BBT (faster boot), with MTDPART and UBIFS.

- Dave

board/davinci/dm357_evm/dm357_evm.c +29 -0
@@ -20,8 +20,10 @@
  */
 
 #include <common.h>
+#include <nand.h>
 #include <i2c.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/nand_defs.h>
 #include "../common/psc.h"
 #include "../common/misc.h"
 
@@ -67,3 +69,30 @@ int misc_init_r(void)
 	return 0;
 }
 
+#define BIT(x) (1 << (x))
+
+static void nand_dm357evm_select_chip2(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip	*this = mtd->priv;
+	u32			wbase = (u32) this->IO_ADDR_W;
+	u32			rbase = (u32) this->IO_ADDR_R;
+
+	if (chip == 1) {
+		wbase |= BIT(3);
+		rbase |= BIT(3);
+	} else {
+		wbase &= ~BIT(3);
+		rbase &= ~BIT(3);
+	}
+	this->IO_ADDR_W = (void *)wbase;
+	this->IO_ADDR_R = (void *)rbase;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	davinci_nand_init(nand);
+	if (0x06000000 == (u32) this->IO_ADDR_W)
+		nand->select_chip = nand_dm357evm_select_chip2;
+	return 0;
+}
+
include/configs/davinci_dm357_evm.h +9 -2
@@ -107,9 +105,16 @@
 #endif
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
 #define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
-#define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE0_BASE
 #define CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
+/*
+ * Boot NAND, small page, has one chipselect (nCE0)
+ * Storage NAND has two chipselects, nCE2 gated by address BIT(3)
+ */
+#define CONFIG_SYS_NAND_BASE_LIST \
+	{ 0x02000000 , 0x06000000, }
+#define CONFIG_SYS_MAX_NAND_DEVICE	2
+#define CONFIG_SYS_NAND_MAX_CHIPS	2
+
 #define CONFIG_ENV_OFFSET		0x0
 #endif
 /*