cmi8330: find OPL3 port automatically
PATCH RESEND 1/1 cmi8330: find OPL3 port automatically
My CMI8329 had OPL3 port specified in SB16 resources. But now I found out that it was my modification of the card's PnP EEPROM a couple of years ago (can be done using C9SETROM.EXE utility). I did it because the OPL3 port was completely missing from PnP data. It seems to be hardwired to 0x388 on CMI8329.
Find OPL3 port automatically by searching in WSS and SB16 resources. If not found, assume that it's hardwired to 0x388.
--- linux-test/sound/isa/cmi8330.c 2009-07-06 21:18:06.000000000 +0200
+++ linux-2.6.30-pentium/sound/isa/cmi8330.c 2009-07-06 21:45:29.000000000
+0200
@@ -362,7 +362,7 @@
wssport[dev] = pnp_port_start(pdev, 0); wssdma[dev] = pnp_dma(pdev, 0); wssirq[dev] = pnp_irq(pdev, 0);
- if (acard->type == CMI8330)
+ if (pnp_port_start(pdev, 1))
fmport[dev] = pnp_port_start(pdev, 1);
/* allocate SB16 resources */
@@ -377,8 +377,13 @@
sbdma8[dev] = pnp_dma(pdev, 0);
sbdma16[dev] = pnp_dma(pdev, 1);
sbirq[dev] = pnp_irq(pdev, 0);
- if (acard->type == CMI8329)
- fmport[dev] = pnp_port_start(pdev, 1);
+ /* On CMI8239, the OPL3 port might be present in SB16 PnP resources */
+ if (fmport[dev] == SNDRV_AUTO_PORT) {
+ if (pnp_port_start(pdev, 1))
+ fmport[dev] = pnp_port_start(pdev, 1);
+ else
+ fmport[dev] = 0x388; /* Or hardwired */
+ }
/* allocate MPU-401 resources */
pdev = acard->mpu;
Signature · 1 line
Ondrej Zary
At Wed, 8 Jul 2009 10:04:29 +0200,
Quoted 8 lines · Ondrej Zary
My CMI8329 had OPL3 port specified in SB16 resources. But now I found out that it was my modification of the card's PnP EEPROM a couple of years ago (can be done using C9SETROM.EXE utility). I did it because the OPL3 port was completely missing from PnP data. It seems to be hardwired to
0x388on CMI8329.
Quoted 5 lines
Find OPL3 port automatically by searching in WSS and SB16 resources. If not found, assume that it's hardwired to
0x388.Signed-off-by Ondrej Zary <[email protected]>
This was already merged. Seems either I forgot mail you or my mail didn't go out (maybe the former :)
thanks,
Takashi
Quoted 37 lines
sound/isa/cmi8330.c +9
-3+0200 @@ -362,7 +362,7 @@ wssport[dev] =pnp_port_start (pdev,0 ); wssdma[dev] =pnp_dma (pdev,0 ); wssirq[dev] =pnp_irq (pdev,0 ); -if (acard->type ==CMI8330 ) +if (pnp_port_start (pdev,1 )) fmport[dev] =pnp_port_start (pdev,1 );/* allocate SB16 resources */ @@ -377,8 +377,13 @@ sbdma8[dev] =pnp_dma (pdev,0 ); sbdma16[dev] =pnp_dma (pdev,1 ); sbirq[dev] =pnp_irq (pdev,0 ); -if (acard->type ==CMI8329 ) - fmport[dev] =pnp_port_start (pdev,1 ); +/* On CMI8239, the OPL3 port might be present in SB16 PnP resources */ +if (fmport[dev] ==SNDRV_AUTO_PORT ) { +if (pnp_port_start (pdev,1 )) + fmport[dev] =pnp_port_start (pdev,1 ); +else + fmport[dev] =0x388 ;/* Or hardwired */ + }/* allocate MPU-401 resources */ pdev = acard->mpu;Signature · 6 lines
-- Ondrej Zary _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Thu, 09 Jul 2009 09:36:28 +0200,
Quoted 11 lines · I wrote:
At Wed, 8 Jul 2009 10:04:29 +0200,
Quoted 8 lines · Ondrej Zary
My CMI8329 had OPL3 port specified in SB16 resources. But now I found out that it was my modification of the card's PnP EEPROM a couple of years ago (can be done using C9SETROM.EXE utility). I did it because the OPL3 port was completely missing from PnP data. It seems to be hardwired to
0x388on CMI8329.
Quoted 8 lines
Quoted 5 lines
Find OPL3 port automatically by searching in WSS and SB16 resources. If not found, assume that it's hardwired to
0x388.Signed-off-by Ondrej Zary <[email protected]>This was already merged. Seems either I forgot mail you or my mail didn't go out (maybe the former :)
BTW, if you create a patch via GIT, please base on the sound git tree below.
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
The patches specific to cmi8330 are found in topic/cmi8330 branch.
thanks,
Takashi