bttv: add i2c addr for old WinTV card to IR probe list
PATCH 1/1 bttv: add i2c addr for old WinTV card to IR probe list
There are old bttv-driven Hauppauge WinTV series cards that have their IR part at i2c addr 0x71, which doesn't get considered in the new 2.6.31 i2c code.
Quoted 1 line
From a 2.6.29 kernel:
lirc_i2c: chip 0x10005 found @ 0x71 (Hauppauge PVR150)
Minor cosmetic glitch, the card in question isn't actually a PVR-150, its:
03:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at f4ffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: bttv
Kernel modules: bttv
Device ID: 0x109e:0x036e, Sub-Device ID: 0x0070:0x13eb
This simply adds 0x71 to the list of addresses i2c_new_probed_device should consider, which gets IR working on this card again.
---
linux/drivers/media/video/bt8xx/bttv-i2c.c +1 -1
@@ -423,7 +423,7 @@That's why we probe 0x1a (~0x34) first. CB */ const unsigned short addr_list[] = { -0x1a ,0x18 ,0x4b ,0x64 ,0x30 , +0x1a ,0x18 ,0x4b ,0x64 ,0x30 ,0x71 ,I2C_CLIENT_END };